Smart Structures and Systems

  • 제4권6호
  • /
  • Pages.711-726
  • /
  • 2008
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Long term health monitoring of post-tensioning box girder bridges

  • Wang, Ming L. (University of Illinois)
  • 투고 : 2007.06.10
  • 심사 : 2007.12.20
  • 발행 : 2008.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

A number of efforts had been sought to instrument bridges for the purpose of structural monitoring and assessment. The outcome of these efforts, as gauged by advances in the understanding of the definition of structural damage and their role in sensor selection as well as in the design of cost and data-effective monitoring systems, has itself been difficult to assess. The authors' experience with the design, calibration, and operation of a monitoring system for the Kishwaukee Bridge in Illinois has provided several lessons that bear upon these concerns. The systems have performed well in providing a continuous, low-cost monitoring platform for bridge engineers with immediate relevant information.

키워드

참고문헌

  1. Ashkenazi, V. and Roberts, G. W. (1997), "Experimental monitoring of the Humber Bridge using GPS", Civil Engineering, Proc ICE 120, 177-182. https://doi.org/10.1680/icien.1997.29810
  2. Baant, Z. P. and Kaplan, M. F. (1996), Concrete at High Temperatures: Material Properties and Mathematical Models, Longman Group Limited.
  3. Bampton, M. C. C., Ramsdell, J. V., Graves, R. E. and Strope, L. A. (1986), "Deer Isle-Sedgwick suspension bridge. wind and motion analysis", Report FHWA/RD-86/183.
  4. Barr, I. G., Waldron, P. and Evans, H. R. (1987), "Instrumentation of glued segmental box girder bridges. Monitoring of Large Structures and Assessment of their Safety", IABSE Colloquium Bergamo.
  5. Basole, M. (1992), "Thermal modeling and field temperature measurement of segmental box girder bridges in florida", M.S. Thesis, Florida Atlantic University.
  6. Bentz, D. P., Clifton, J. R., Ferrais, C. F. and Garboczi, E. J. (1999), "Transport properties and durability of concrete: literature review and research plan", NISTIR 6395, U.S. Department of Commerce, September.
  7. Brownjohn, J. M. W., Bocciolone, M., Curami, A., Falco, M. and Zasso, A. (1994), "Humber bridge full-scale measurement campaigns 1990-1991", JWEIA 52, 185-218.
  8. Carder, D.S. (1937), Observed vibrations of bridges. Bulletin, Seismological Society of America, 27, 267-303.
  9. Catbas, F. N., Grimmelsman, K. A. and Aktan, A. E. (2000), "Structural identification of the commodore barry bridge", Proceedings of SPIE 3995, 84-97.
  10. Cheung, M. S., Tadros, G. S., Brown, J., Dilger, W. H., Ghali, A. and Lau, D. T. (1997), "Field monitoring and research on performance of the confederation bridge", Canadian Journal of Civil Engineering 24, 951-962.
  11. DeWolf, J., Descoteaux, T., Kou, J., Lauzon, R., Mazurek, D. and Paproski, R. (1989), "Expert systems for bridge monitoring", Computing in Civil Engineering: Proceedings of the Sixth Conference, p. 203-210, American Society of Civil Engineers, Atlanta, GA.
  12. DeWolf, J., Lauzon, R. G., Fu, Y. and Lengyel, T. F. (2002), "Long-term monitoring of bridges in connecticut for performance evaluation of structures", Performance of Structures: From Research to Design, 2002 Structures Congress, p. 195-196, American Society of Civil Engineers, Denver Colorado.
  13. Lau, C. K., Wong, K. Y. (1997), "Design, construction and monitoring of three key cable-supported bridges in hong kong", Proc 4th International Kerensky Conference on Structures in the new millennium, Hong Kong, 105-115.
  14. Leitch, J., Long, A. E., Thompson, A., Sloan, T. D. (1987), Monitoring the behaviour of a major box-girder bridge. Structural Assessment Based on Full and Large-Scale Testing, BRE Garston 212-219, Butterworths.
  15. Lloyd, G., Wang, M. L. and Wang, X. (2004), "Thermo-mechanical analysis of long-term global and local deformation measurements of the kishwaukee bridge using the bootstrap", Earthq. Eng. Eng. Vib., 3(1), 107-115. https://doi.org/10.1007/BF02668856
  16. Lloyd, G., Wang, M. L. and Wang, X. (2004), "Thermo-mechanical analysis of the kishwaukee bridge from global and local deformation measurements", Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Shih-Chi Liu, Vol. 5391, p. 618-623, SPIE, San Diego.
  17. Lloyd, G., Wang, M. L. and Wang, X. (2004), "Components of a real-time monitoring system for a segmental pre-cast concrete box girder bridge", Structural Materials Technology (SMT): NDE/NDT for Highways and Bridges 2004, Buffalo, NY.
  18. Lloyd, G., Wang, M. L., Wang, X. and Love, J. (2003), "Recommendations for intelligent bridge monitoring systems: architecture and temperature-compensated bootstrap analysis", Smart Struct. Mater. 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures, Shih-Chi Liu, 5057, 247-258, SPIE, San Diego.
  19. Lloyd, G., Wang, M. L., Wang, X. and Halvonik, J. (2003), "Bootstrap analysis of long-term global and local deformation measurements of the kishwaukee bridge", The 4th International Workshop on Structure Health Monitoring, Fu-Kuo Chang, p. 163-171, Stanford University, Stanford.
  20. Macdonald, J. H. G., Dagless, E. L., Thomas, B. T., Taylor, C. A. (1997), "Dynamic measurements of the second severn crossing", Proc, ICE, Transport, 123, 4, 241-248. https://doi.org/10.1680/itran.1997.29978
  21. Miyata, T., Yamada, H., Katsuchi, H. and Kitagawi, (2002), "Fullscale measurement of akashi-kaikyo bridge during typhoon", JWEIA 90, 1517-1527.
  22. Peeters, B., Maeck, J. and De Roeck, G. (2001), "Vibration-based damage detection in civil engineering: excitation sources and temperature effects", Smart Mater. Struct., 10, 518-527. https://doi.org/10.1088/0964-1726/10/3/314
  23. Steven, D. Glaser, Hui Li, Ming L. Wang, Jinping Ou and Jerome Lynch, (2007), "Sensor technology innovation for the advancement of structural health monitoring: a strategic program of US-China research for the next decade," Smart Struct. Sys., 3(2), 221-244. https://doi.org/10.12989/sss.2007.3.2.221
  24. Nagayama, T., Sim, S. H., Miyamori, Y. and Jr., Spencer, B. F. (2007), "Issues in structural health monitoring employing smart sensors", Smart Struct. Sys., 3(3), 299-320. https://doi.org/10.12989/sss.2007.3.3.299
  25. Vincent, G. S. (1958), "Golden gate bridge vibration study", ASCE J. Struct. Div., 84(ST6).
  26. Wang, M. L., etc. (2001), "Health assessment of the kishwaukee river bridge", Technical Report to IDOT, University of Illinois, April.
  27. Wang, X., Wang, M. L., Zhao, Y., Chen, H. and Zhou, L. L. (2004), "Smart health monitoring system for a prestressed concrete bridge", Smart Structures Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Shih-Chi Liu, 5391, 597-608, SPIE, San Diego.
  28. Wang, X. and Wang, M. L. (2002) "Smart health monitoring system of a prestressed box girder bridge", HK Proceedings of ICANCEER 2002, the Hong Kong Polytechnic University, Hong Kong.
  29. Yang Wang, R. Andrew Swartz, Jerome P. Lynch, Kincho H. Law, Kung-Chun Lu and Chin-Hsiung Loh, (2007), "Decentralized civil structural control using real-time wireless sensing and embedded computing", Smart Struct. Sys., 3(3), 321-340. https://doi.org/10.12989/sss.2007.3.3.321
  30. Yi, J. H., Cho, S. J., Koo, K. Y., Yun, C. B., Kim, J. T., Lee, C. G. and Lee, W. T. (2007), "Structural performance evaluation of a steel-plate girder bridge using ambient acceleration measurements", Smart Struct. Sys., 3(3), 281-298. https://doi.org/10.12989/sss.2007.3.3.281
  31. Ni, Y. Q., Ko, J. M., Hua, X. G. and Zhou, H. F. (2007), "Variability of measured modal frequencies of a cablestayed bridge under different wind conditions", Smart Struct. Sys., 3(3), 341-356. https://doi.org/10.12989/sss.2007.3.3.341

피인용 문헌

  1. Measurement of Prestressing Force in Pretensioned UHPC Deck Using a Fiber Optic FBG Sensor Embedded in a 7-Wire Strand vol.2016, 2016, https://doi.org/10.1155/2016/8634080
  2. Temperature effects on cable stayed bridge using health monitoring system: a case study vol.10, pp.5, 2011, https://doi.org/10.1177/1475921710388970
  3. Life-Cycle Monitoring of Long-Span PSC Box Girder Bridges through Distributed Sensor Network: Strategies, Methods, and Applications vol.2015, 2015, https://doi.org/10.1155/2015/497159
  4. Calibration of Elasto-Magnetic Sensors on In-Service Cable-Stayed Bridges for Stress Monitoring vol.18, pp.2, 2018, https://doi.org/10.3390/s18020466
  5. Finite element model updating of Kömürhan highway bridge based on experimental measurements vol.6, pp.4, 2008, https://doi.org/10.12989/sss.2010.6.4.373
  6. Monitoring of tension force and load transfer of ground anchor by using optical FBG sensors embedded tendon vol.7, pp.4, 2008, https://doi.org/10.12989/sss.2011.7.4.303