DOI QR코드

DOI QR Code

A migration based reconstruction algorithm for the imaging of defects in a plate using a compact array

  • Muralidharan, Ajith (Center for Nondestructive Evaluation, Department of Mechanical Engineering, Indian Institute of Technology) ;
  • Balasubramaniam, Krishnan (Center for Nondestructive Evaluation, Department of Mechanical Engineering, Indian Institute of Technology) ;
  • Krishnamurthy, C.V. (Center for Nondestructive Evaluation, Department of Mechanical Engineering, Indian Institute of Technology)
  • 투고 : 2006.10.17
  • 심사 : 2008.01.17
  • 발행 : 2008.07.25

초록

An array based, outward monitoring, ultrasonic guided wave based SHM technique using a single transmitter and multiple receivers (STMR), with a small footprint is discussed here. The previous implementation of such SHM arrays used a phase-reconstruction algorithm (that is similar to the beam-steering algorithm) for the imaging of reflectors. These algorithms were found to have a limitation during the imaging of defects/reflectors that are present in the "near-field" of the array. Here, the "near-field" is defined to be approximately 3-4 times the diameter of the compact array. This limitation is caused by approximations in the beam-steering reconstruction algorithm. In this paper, a migration-based reconstruction algorithm, with dispersion correction in the frequency domain, is discussed. Simulation and experimental studies are used to demonstrate that this algorithm improves the reconstruction in the "near-field" without decreasing the ability to reconstruct defects in the "far-field" in both isotropic and anisotropic plates.

키워드

참고문헌

  1. Bleistein, N. and Gray, S. H. (2001) "From the Hagedoorn imaging technique to Kirchhoff migration and inversion", Geophysical Prospecting, 49, 629-43. https://doi.org/10.1046/j.1365-2478.2001.00290.x
  2. Boller, C. (2000), "Next generation structural health monitoring and its integration into aircraft design", Int. J. Syst. Sci., 31, 1333-1349. https://doi.org/10.1080/00207720050197730
  3. Davies, J. and Cawley, P. (2006), "The application of synthetically focused imaging techniques for high resolution guided wave pipe inspection", Proc. of the NDT 2006 - The 45th Annual British Conference on NDT, 12-14 September, Stratford-upon-Avon, England, UK.
  4. Fehler, M. C. and Huang, L. (2002), "Modern imaging using seismic reflection data", Annu. Rev. Earth. Planet Sci., 30, 259-284. https://doi.org/10.1146/annurev.earth.30.091201.140909
  5. Fujino, Y. and Abe, M. (2004), "Structural health monitoring—current status and future", Proceedings of 2nd European Workshop on Structural Health Monitoring, Munich, Germany, 3-10.
  6. Giurgiutiu, V. and Zagrai, A. (2002), ''Embedded self-sensing piezoelectric active sensors for on-line structural identification'', ASME J. Vib. Acoust., 124, 116-125. https://doi.org/10.1115/1.1421056
  7. Giurgiutiu, V., Zagrai, A. and Bao, J. (2002), "Embedded active in-situ structural monitoring of structures", J. Pressure Vessel Technol., 124, 293-99. https://doi.org/10.1115/1.1484117
  8. Jagannathan, R., Somasekhar, B. V., Balasubramaniam, K. and Krishnamurthy, C. V. (2004), "Plate waves structural health monitoring of composite structures", Review of Progress in Quantitative Non-Destructive Evaluation, 24B, 1802-1808.
  9. Lin, M. and Chang, F. K. (2002), "The manufacturing of composite structures with a built-in network of piezoceramics", Comput. Sci. Technol., 62, 919-39. https://doi.org/10.1016/S0266-3538(02)00007-6
  10. Malyarenko, E. V. and Hinders, M. K. (2001), "Lamb wave diffraction tomography", Ultrasonics, 39, 269-81. https://doi.org/10.1016/S0041-624X(01)00055-5
  11. Norton, S. J. (2002), "Synthetic aperture imaging with arrays of arbitrary shape-Part I: General case", IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 49(4), 399-403. https://doi.org/10.1109/58.996556
  12. Prasad, S. M., Balasubramaniam, K. and Krishnamurthy, C. V. (2003), "Structural health monitoring of composite structures using lamb wave tomography", Smart Mater. Struct., 13, N73-N79.
  13. Prasad, S. M., Jagannathan, R., Balasubramaniam, K. and Krishnamurthy, C. V. (2003), "Structural health monitoring of anisotropic layered composite plates using guided ultrasonic lamb wave data", Review of Progress in Quantitative Nondestructive Evaluation, 23B, 1460-67.
  14. Prine, D. W. (1972), "Synthetic aperture ultrasonic imaging", Proceedings of Engineering Applications of Holography Symposium, Society of Photo-optical Instrumentation Engineers, Los Angeles, CA, USA, 287.
  15. Qing, X., Kumar, A. Zhang, C., Gonzalez, I. and Chang, Fu-Kuo (2005), "High speed hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring", Smart Mater. Struct., 14(3), S98-103. https://doi.org/10.1088/0964-1726/14/3/012
  16. Rajagopalan, J., Balasubramaniam, K. and Krishnamurthy, C. V. (2006), "A single transmitter multi receiver (STMR) PZT array for guided ultrasonic wave based structural health monitoring of large isotropic plate structures", Smart Mater. Struct. 15 1190-1196. https://doi.org/10.1088/0964-1726/15/5/005
  17. Rajagopalan, J., Balasubramaniam, K. and Krishnamurthy, C. V. (2006) ,"A phase reconstruction algorithm for Lamb wave based structural health monitoring of anisotropic multilayered composite plates", J. Acoust. Soc. Am., 119(2), 872-878. https://doi.org/10.1121/1.2149775
  18. Rose, J. L. (1999), Ultrasonic Waves in Solid Media, Cambridge University Press.
  19. Sicard, R., Goyette, J. and Zellouf, D. (2002), "A SAFT algorithm for lamb wave imaging of isotropic plate-like structures", Ultrasonics, 39, 487-94. https://doi.org/10.1016/S0041-624X(01)00087-7
  20. Schmitz, V., Chakhlov, S. and Muller, W. (2000), "Experiences with synthetic aperture focusing technique in the field", Ultrasonics, 38, 731-38. https://doi.org/10.1016/S0041-624X(99)00219-X
  21. Seydel, J. (1982), "Ultrasonic synthetic aperture focusing techniques in NDT", Research Techniques in Non destructive Testing(Academic Press), VI, 1-47.
  22. Sicard, R., Goyette, J. and Zellouf, D. (2002), "A numerical dispersion compensation technique for time recompression of Lamb wave signals", Ultrasonics, 20, 727-732.
  23. Spies, M. and Jager, W. (2003), "Synthetic aperture focusing for defect reconstruction in anisotropic media", Ultrasonics, 41, 125-131. https://doi.org/10.1016/S0041-624X(02)00407-9
  24. Subbarao, P. M. V., Munshi, P. and Muralidhar, K. (1996) "Performance of iterative tomographic algorithms applied to non-destructive evaluation with limited data", NDT&E, 30(6), 359-70.
  25. Victorov, I. (1967), Rayleigh and Lamb Waves: Physical Theory and Applications, Plenum Press, New York.
  26. Wilcox, P. D., Lowe, M. and Cawley, P. (1999), "Lamb and SH wave transducer arrays for the inspection of large areas of thick plates", Review of Progress in Quantitative Non-Destructive Evaluation, 19A, 1049-56.
  27. Wilcox, P. D., Lowe, M. J. S. and Cawley, P. (2000), "A signal processing technique to remove the effect of dispersion from guided wave signals", Review of Progress in Quantitative Non-Destructive Evaluation, 20A, 555-562.
  28. Wilcox, P. D. (2002), "Guided wave beam steering from omni-directional transducer arrays", Review of Progress in Quantitative Non-Destructive Evaluation, 22A, 761-68.
  29. Wilcox, P. D. (2003), "Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures", IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 50(6), 699-709. https://doi.org/10.1109/TUFFC.2003.1209557

피인용 문헌

  1. Structural health monitoring of anisotropic plates using ultrasonic guided wave STMR array patches vol.42, pp.3, 2009, https://doi.org/10.1016/j.ndteint.2008.09.012
  2. Blind inversion method using Lamb waves for the complete elastic property characterization of anisotropic plates vol.125, pp.2, 2009, https://doi.org/10.1121/1.3050253
  3. Application of a matched filter approach for finite aperture transducers for the synthetic aperture imaging of defects vol.57, pp.6, 2010, https://doi.org/10.1109/TUFFC.2010.1556
  4. Lamb wave-based damage imaging method for damage detection of rectangular composite plates vol.1, pp.4, 2014, https://doi.org/10.12989/smm.2014.1.4.411
  5. Sensitivity analysis of circumferential transducer array with T(0,1) mode of pipes vol.21, pp.6, 2008, https://doi.org/10.12989/sss.2018.21.6.761