DOI QR코드

DOI QR Code

Debonding monitoring of CFRP strengthened RC beams using active sensing and infrared imaging

  • Sohn, Hoon (Department of Civil & Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Seung Dae (Carnegie Mellon University) ;
  • In, Chi Won (Carnegie Mellon University) ;
  • Cronin, Kelly E. (Carnegie Mellon University) ;
  • Harries, Kent (University of Pittsburgh)
  • 투고 : 2006.10.30
  • 심사 : 2007.12.10
  • 발행 : 2008.07.25

초록

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

키워드

참고문헌

  1. Akuthota, B., Hughes, D., Zoughi, R., Myers, J. and Nanni, A. (2004), "Near-field microwave detection of disbond in carbon fiber reinforced polymer composites used for strengthening cement-based structures and disbond repair verification", J. Mater. Civil. Eng., 16(6), 540-546. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(540)
  2. Ansari, F. (2005), "Fiber optic health monitoring of civil structures using long gage and acoustic sensors", Smart Mater. Struct., 14(3), S1-S7. https://doi.org/10.1088/0964-1726/14/3/001
  3. Ekenel, M., Stephen, V., Myers, J. J. and Zoughi, R. (2004), "Microwave NDE of RC beams strengthened with CFRP laminates containing surface defects and tested under cyclic loading", Proc., 16th World Conference on Nondestructive Testing, Montreal, Canada. August 30-September 3.
  4. Feng, M. Q., Flaviis, F. and Kim, Y. J. (2000a), ''Use of microwaves for damage detection of fiber reinforced polymer-wrapped concrete structure'', J. Eng. Mech., 128(2), 172-183.
  5. Fink, M. (1999), "Time-reversed acoustics", Scientific American, 281(5), 91-97. https://doi.org/10.1038/scientificamerican1199-91
  6. Fink, M. and Prada, C. (2001), "Acoustic time-reversal mirrors", Inverse Problems, 17, R1-R38. https://doi.org/10.1088/0266-5611/17/1/201
  7. Giurgiutiu, V. and Zagrai, A. N. (2001), "Embedded self-sensing piezoelectric active sensors for online structural identification", ASME Journal of Vibration and Acoustics, 124, January 116-125
  8. Giurgiutiu, V., Harries, K. A., Petrou, M. F., Bost, J. and Quattlebaum, J. (2003), "Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays", Earthquake Eng. And Eng. Vib., 2(2), 213-224. https://doi.org/10.1007/s11803-003-0005-9
  9. Giurgiutiu, V. and Lyshevski, S. E. (2004), Micromechatronics: Modeling, analysis, and design with MATLAB, CRC Press Inc, Boca Raton, FL.
  10. Hong, S. and Harichandran, R. (2005), "Sensors to monitor CFRP/concrete bond in beams using electrochemical impedance spectroscopy", J. Compo. Constr., 9(6), 515-523. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:6(515)
  11. Ing, R.K. and Fink, M. (1996), "Time recompression of dispersive lamb waves using a time reversal mirror - application to flaw detection in thin plates", Proc., 1996 IEEE Ultrasonics Symposium, 1, 659-663.
  12. Jackson, D. R., Islam, M., Hurley, T. J. and Alvarez, F. J. (1999), "Feasibility of evaluating fiber reinforced plastic (FRP) wrapped reinforced concrete columns using ground penetrating radar (GPR) and infrared (IR) thermography", Demonstration Project No., 84-2, U.S. Department of Transportation-Federal Highway Administration, Washington, D.C.
  13. Karbhari, V. M., Chin, J. W. and Reynaud, D. (2000), "Critical gaps in durability data for FRP composites in civil infrastructure", Proc., 45th International Society for the Advancement of Materials and Process Engineering (SAMPE) Symposium and Exhibition, Vol. 45, 549-563, Long Beach, CA, May 21-25.
  14. Kessler, S. S., Johnson, C. E. and Dunn, C. T. (2003), "Experimental application of optimized Lamb wave actuating/sensing patches for health monitoring of composite structures", Proc., of the 4th International Workshop on Structural Health Monitoring, Stanford University, 429-436.
  15. Kim, S. B. and Sohn, H. (2007), "Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials", Smart Mater. Struct., 16, 2375-2387. https://doi.org/10.1088/0964-1726/16/6/042
  16. Kim, S. D., In, C. W., Cronin, K., Sohn, H. and Harries, K. (2007), "A reference-free NDT technique for debonding detection in CFRP strengthened RC structures", ASCE J. Struct Eng., 133(8), 1080-1091. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:8(1080)
  17. Levar, J. and Hamilton, H. (2003), "Nondestructive evaluation of carbon fiber-reinforced polymer-concrete bond using infrared thermography", ACI Mater. J., 100(1), 63-72.
  18. Luangvilai, K., Punurai, W. and Jacobs, L. (2002), "Guided lamb wave propagation in composite plate/concrete component", J. Eng Mech., 128(12), 1337-1341. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:12(1337)
  19. Mal, A. K., Shih, F. J., Ricci, F. and Sauvik, B. (2005), "Impact damage detection in composite structures using Lamb waves", Proc., of the SPIE, 5768, 295-303.
  20. Mirmiran, A., Shahawy, M. and Echary, H. (1999), "Acoustic emission monitoring of hybrid FRP-concrete columns", J. Eng. Mech., 125(8), 899-905. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:8(899)
  21. Mirmiran, A. and Wei, Y. (2001), "Damage assessment of FRP-encased concrete using ultrasonic pulse velocity", J. Eng. Mech., 127(2), 126-135. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:2(126)
  22. Park, H. W., Sohn, H., Law, K. H. and Farrar, C. R. (2004), "Time reversal active sensing for health monitoring of a composite plate", J. Sound Vib., in press.
  23. Reeve, B. (2005), "Effect of adhesive stiffness and CFRP geometry on the behavior of externally bonded CFRP retrofit measures subject to monotonic loads", MS Thesis, University of Pittsburgh Department of Civil and Environmental Engineering.
  24. Rose, L. J. (1999), Ultrasonic Waves in Solid Media, Cambridge University Press, New York.
  25. Sohn, H., (2007), "Effects of environmental and operational variability on structural health monitoring", A Special Issue of Philosophical Transactions of the Royal Society on Structural Health Monitoring, 365, 539-560.
  26. Sohn, H., Park, H., Law, K. and Farrar, C. (2007), "Combination of a time reversal process and a consecutive outlier analysis for baseline-free damage diagnosis", J. Intell. Mater. Sys. Struct., 18(4), 335-346.
  27. Starnes, M. A., Carino, N. J. and Kausel, E. A. (2003), "Preliminary thermography studies for quality control of concrete structures strengthened with fiber-reinforced polymer composites", J. Mater. Civil Eng., 15(3), 266-273. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(266)
  28. Viktorov, I. A. (1967), Rayleigh and Lamb Waves, Plenum Press, New York.
  29. Zorn, A. (2006), "Effect of adhesive stiffness and CFRP geometry on the behavior of externally bonded CFRP retrofit measures subject to fatigue loads", MS Thesis, University of Pittsburgh Department of Civil and Environmental Engineering.

피인용 문헌

  1. Development of an integrated structural health monitoring system for bridge structures in operational conditions 2012, https://doi.org/10.1007/s11709-012-0161-y
  2. Potentialities of infrared thermography to assess damage in bonding between concrete and GFRP vol.8, pp.3, 2015, https://doi.org/10.1590/S1983-41952015000300004
  3. Non-destructive evaluation of concrete quality using PZT transducers vol.6, pp.7, 2010, https://doi.org/10.12989/sss.2010.6.7.851
  4. Interfacial debonding detection of strengthened steel structures by using smart CFRP-FBG composites vol.28, pp.11, 2008, https://doi.org/10.1088/1361-665x/ab3add