Smart Structures and Systems

  • 제4권2호
  • /
  • Pages.123-135
  • /
  • 2008
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of geometry and loading conditions on the dynamics of martensitic fronts

  • Berezovski, Arkadi (Centre for Nonlinear Studies, Institute of Cybernetics at Tallinn University of Technology)
  • 투고 : 2007.06.19
  • 심사 : 2007.10.04
  • 발행 : 2008.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Damping capacity of SMA damping devices is simulated numerically under distinct geometry and loading conditions. Two-dimensional numerical simulations are performed on the basis of a phenomenological model of dynamics of martensite-austenite phase boundaries. Results of the simulations predict the time delay and the value of the stress transferred to other parts of a construction by a damper device.

키워드

참고문헌

  1. Abeyaratne, R. and Knowles, J. K. (2006), Evolution of Phase Transitions: A Continuum Theory, Cambridge University Press, Cambridge, UK.
  2. Berezovski, A. and Maugin, G. A. (2001),"Simulation of thermoelastic wave propagation by means of a composite wave-propagation algo-rithm", J. Comput. Physics, 168, 249-264. https://doi.org/10.1006/jcph.2001.6697
  3. Berezovski, A. and Maugin, G. A. (2005a),"On the velocity of a moving phase boundary in solids", Acta Mech., 179, 187-196. https://doi.org/10.1007/s00707-005-0251-1
  4. Berezovski, A. and Maugin, G. A. (2005b),"Stress-induced phase-transition front propagation in thermoelastic solids", Eur. J. Mech. -A/Solids, 24, 1-21. https://doi.org/10.1016/j.euromechsol.2004.09.004
  5. Casciati, F., Casciati, S. and Faravelli, L. (2007),"Fatigue characterization of a Cu-based shape memory alloy", Proc. Estonian Acad. Sci. Phys. Math., 56, 207-217.
  6. Desroches, R. and Smith, B. (2004),"Shape memory alloys in seismic resistant design and retrotfi: a critical review of their potential and limitations", J. Earthq. Eng., 8, 415-429.
  7. Goo, B. C. and Lexcellent, C. (1997),"Micromechanics-based modeling of two-way memory effect of a singlecrystalline shape-memory alloy", Acta Mater., 45, 727-737. https://doi.org/10.1016/S1359-6454(96)00172-3
  8. LeVeque, R.J. (1997),"Wave propagation algorithms for multidimensional hyperbolic systems", J. Comput. Physics, 131, 327-353. https://doi.org/10.1006/jcph.1996.5603
  9. Marko, J., Thambiratnam, D. and Perera, N. (2004),"Influence of damping systems on building structures subject to seismic effects", Eng. Struct., 26, 1939-1956. https://doi.org/10.1016/j.engstruct.2004.07.008
  10. McKelvey, A. L. and Ritchie, R. O. (2000),"On the temperature dependence of the superelastic strength and the prediction of the theoretical uniaxial transformation strain in Nitinol", Phil. Mag. A, 80, 1759-1768. https://doi.org/10.1080/01418610008219082
  11. Muschik, W. and Berezovski, A. (2004),"Thermodynamic interaction between two discrete systems in nonequilibrium", J. Non-Equilibr. Thermodyn., 29, 237-255.
  12. Saadat, S., Salichs, J., Noori, M., Hou, Z., Davoodi, H., Baron, I., Suzuki, Y. and Masuda, A. (2002),"An overview of vibration and seismic applications of NiTi shape memory alloy", Smart Mater. Struct., 11, 218-229. https://doi.org/10.1088/0964-1726/11/2/305
  13. Truskinovsky, L. (1987),"Dynamics of nonequilibrium phase boundaries in a heat conducting nonlinear elastic medium", J. Appl. Math. Mech. (PMM), 51, 777-784. https://doi.org/10.1016/0021-8928(87)90140-7
  14. Van Humbeeck, J. (2003),"Damping capacity of thermoelastic martensite in shape memory alloys", J. Alloys Compounds, 355, 58-64. https://doi.org/10.1016/S0925-8388(03)00268-8
  15. Van Humbeeck, J. and Kustov, S. (2005),"Active and passive damping of noise and vibrations through shape memory alloys: applications and mechanisms", Smart Mater. Struct., 14, S171-S185. https://doi.org/10.1088/0964-1726/14/5/001

피인용 문헌

  1. Fatigue laboratory tests toward the design of SMA portico-braces vol.7, pp.1, 2008, https://doi.org/10.12989/sss.2011.7.1.041