Steel and Composite Structures

  • 제8권6호
  • /
  • Pages.457-473
  • /
  • 2008
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A critical steel yielding length model for predicting intermediate crack-induced debonding in FRP -strengthened RC members

  • Dai, Jian-Guo (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University) ;
  • Harries, Kent A. (Department of Civil and Environmental Engineering, University of Pittsburgh) ;
  • Yokota, Hiroshi (Port and Airport Research Institute)
  • 투고 : 2008.03.05
  • 심사 : 2008.10.17
  • 발행 : 2008.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Yielding of the internal steel reinforcement is an important mechanism that influences the Intermediate Crack-induced debonding (IC debonding) behavior in FRP-strengthened RC members since the FRP is required to carry additional forces beyond the condition of steel yielding. However, rational design practice dictates an appropriate limit state is defined when steel yielding is assured prior to FRP debonding. This paper proposes a criterion which correlates the occurrence of IC debonding to the formulation of a critical steel yielding length. Once this length is exceeded the average bond stress in the FRP/concrete interface exceeds its threshold value, which proves to correlate with the average bond resistance in an FRP/concrete joint under simple shear loading. This proposed IC debonding concept is based on traditional sections analysis which is conventionally applied in design practice. Hence complex bond stress-slip analyses are avoided. Furthermore, the proposed model incorporates not only the bond properties of FRP/concrete interface but also the beam geometry, and properties of steel and FRP reinforcement in the analysis of IC debonding strength. Based upon a solid database, the validity of the proposed simple IC debonding criterion is demonstrated.

키워드

참고문헌

  1. ACI 440.2R-02 (2002), "Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures." American Concrete Institute, Farmington Hills MI.
  2. Achintha, P. M. M. and Burgoyne, C. J. (2006), "A fracture-mechanics model for debonding of external fibre reinforced polymer plates on reinforced concrete beams." Proceedings of 10th East Asia-Pacific Conference on Structural Engineering and Construction, Vol. 6, Bangkok, Thailand, 731-736.
  3. Arduini, M., Di Tommaso, A. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams." ACI Struct. J., 94(4), 363-370.
  4. Beber, A. J., Campos Filho, A. and Campagnolo, J. L. (1999), "Flexural strengthening of R/C beams with CFRP sheets." Proceedings of 8th International Structural Faults and Repair Conference, London.
  5. Brosens, K. and Van Gemert, D. (1998), "Plate end shear design for external CFRP laminates", Proceedings of FRAMCOS-3, Aedificatio Publishers, Freiburg, Germany, 1793-1804.
  6. Buyukozturk O. and Hearing B. (1998), "Fracture behavior of precracked concrete beams retrofitting with FRP." ASCE J. Compos. Constr., 2(3), 138-144. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:3(138)
  7. Ceroni, F., Pecce, M. and Matthys, S. (2004), "Tension stiffening of reinforced concrete ties strengthened with externally bonded fiber reinforced polymer sheets." ASCE, J. Compos. Constr., 8(1), 22-32. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:1(22)
  8. Chan, T. K. and Li, X. A. (2000), "Improving crack behavior of one-way slabs with carbon fibre plates." Proceedings of the 4th Asia Pacific Structural Engineering & Construction Conference, Kuala Lumpur, Malaysia, 351-358.
  9. Chen, J.F., Yuan, H. and Teng, J. G. (2005), "Analysis of debonding failure along a softening FRP-to-concrete interface between two adjacent cracks." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong, 103-112.
  10. Chen, J.F., Yang, Z.J. and Holt, G.D. (2001), "FRP or steel plate-to-concrete bonded joints: Effect of test methods on experimental bond strength." Steel & Composite Structures, 1(2), 231-244. https://doi.org/10.1296/SCS2001.01.02.06
  11. Dai, J. G., Ueda, T., Sato, Y. and Ito, Y. (2005a), "Flexural strengthening of RC beams using externally bonded FRP sheets through flexible adhesive bonding." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong, 213-222.
  12. Dai, J. G., Ueda, T. and Sato, Y. (2005b), "Development of nonlinear bond stress-slip model of FRP sheetconcrete interfaces with a simple method." ASCE Journal of Composites for Construction, 9(1), 52-62. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:1(52)
  13. Dai, J. G., Ueda, T. and Sato, Y. (2006), "Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests." Journal of Advanced Concrete Technology, 4(1), 133-145. https://doi.org/10.3151/jact.4.133
  14. Dai, J.G., Yokota, H., Ueda, T. and Wan B. (2007), "Influence of bending and dowel action on the interface bond in RC beams strengthened with FRP sheets: An experimental investigation." Fracture Mechanics of Concrete and Concrete Structures, Vols 1-3- Vol 1: New Trends in Fracture Mechanics of Concrete; Vol 2: Design, Assessment and Retrofitting of RC Structures; Vol 3: High-Performance Concrete, Brick-Masonry and Environmental Aspects, 1149-1156.
  15. Delaney, J. (2006), "Defect criticality of FRP rehabilitated RC beams." Master's thesis, University of California, San Diego.
  16. FIB. (2001), "Externally bonded FRP reinforcement for RC structures." Bulletin 14, Lausanne, Switzerland.
  17. Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M. and Parke, G. A.R. (1997), "A preliminary evaluation of carbon fiber reinforced polymer plates for strengthening reinforced concrete members." Proc. Inst. Civ. Eng., Struct. Build., 122(2), 127-142. https://doi.org/10.1680/istbu.1997.29302
  18. Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M. and Parke, G. A. R. (1998), "An experimental study of the anchorage length of carbon fiber composite plates used to strengthen reinforced concrete beams." Constru. Building. Mater., 12, 203-219. https://doi.org/10.1016/S0950-0618(98)00002-6
  19. Gunes et al. (2006), "Design of FRP retrofitted flexural members against debonding failures." Proceedings of the 8th U.S. National Conference on Earthquake Engineering, San Francisco, California, USA, Paper No. 1205.
  20. Holzenkamfer, O. (1994), "Ingenieurmodelle des Verbundes geklebter Bewehrung für Betonbauteile." Ph.D. Dissertation, TU Braunschweig, Germany (in German).
  21. Ibars, E. O. (2005), "Peeling failure in beams strengthened by plate bonding: A design proposal.", Ph.D dissertation, Department d'Enginyeria de la Construccio, Universitat Politècnica de Catalunya, Spain.
  22. JSCE (2001), "Recommendations for upgrading of concrete structures with use of continuous fiber sheets." Concrete Engineering Series 41, Japan Society of Civil Engineers.
  23. Kim, S. H. and Aboutaha, R. S (2004), "Ductility of carbon fiber-reinforced polymer (CFRP) strengthened reinforced concrete beams: experimental investigation." Steel & Composite Structures, 4(5), 333-353. https://doi.org/10.12989/scs.2004.4.5.333
  24. Kishi, N., Mikami, H., Sato, M. and Matsoka, K. (1998), "Flexural bond behavior of RC beams externally bonded with FRP sheets." Proceedings of the Japan Concrete Institute, 20(1), 515-520.
  25. Kishi, N., Mikami, H. and Zhang, G. (2003), "Numerical analysis of debonding behavior of FRP sheet for flexural strengthening RC beams." JSCE Journal of Materials, Concrete Structures and Pavements, 58(725), 255-272.
  26. Kotynia, R. (2005), "Debonding failures of RC beams strengthened with externally bonded strips." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong 247-252.
  27. Kurihashi, Y., Kishi, N., Mikami, H. amd Matsoka, K. (2000), "Effect of FRP reinforcement amount on flexural bond behavior of FRP-strengthened RC beams." Proceedings of the Japan Concrete Institute, 22(1), 481-486.
  28. Leung, Christhopher K. Y. (2001), "Delamination failure in concrete beams retrofitted with a bonded plate." ASCE Journal of Materials in Civil Engineering, 13(2), 106-113. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:2(106)
  29. Leung, Christopher K. Y., Ng., Mandy Y. M. and Luk, Herman, C. Y. (2006), "Empirical approach for determining ultimate FRP strain in FRP-strengthened concrete beam." ASCE Journal of Composites for Construction, 10(2), 125-136. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:2(125)
  30. Leung Christopher K. Y. and Tung, W. K. (2006), ''Three-parameter model for debonding of FRP plate from concrete substrate", ASCE Journal of Engineering Mechanics, 132(5), 509-518. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:5(509)
  31. Liu, I.S.T., Oehlers, D.J. and Seracino, R. (2007), "Study of intermediate crack debonding in adhesively plated beams." ASCE J. Composites for Construction., 11(2), 175-183. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(175)
  32. Lu, X. Z., Teng, J.G., Ye, L.P. and Jiang, J. J. (2007), "Intermediate crack debonding in FRP-strengthened beams: FE analysis and strength model." ASCE Journal of Composites for Construction, 11(2), 161-174. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(161)
  33. Meier, U. (1995), "Strengthening of structures using carbon fib/epoxy composites." Construction and Building Materials, 9(6), 341-351. https://doi.org/10.1016/0950-0618(95)00071-2
  34. Niedermeier R. (2000), "Zugkraftdeckung bei klebearmierten bauteilen (Envelope line of tensile forces while using externally bonded reinforcement)." Ph.D. Dissertation, TU Munchen (in German)
  35. Niu, H. and Wu, Z. S. (2001), "Interfacial debonding mechanism influenced by flexural cracks in FRPstrengthened beams." Journal of Structural Engineering, JSCE, 47A, 1277-1288.
  36. Niu, H. and Wu, Z. S. (2002), "Strengthening effects of RC flexural members with FRP sheets affected by adhesive layers." Journal of Applied Mechanics, 5, 887-897.
  37. Niu, H. D. and Wu, Z. S. (2006), "Numerical analysis of debonding mechanisms of FRP-strengthened reinforced concrete beams." Computer-aided civil and infrastructure engineering, 20(5), 354-3687.
  38. Oehlers, D.J. (2005), "Generic Debonding Mechanisms in FRP Plated Beams and Slabs." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. Hong Kong, 35-44.
  39. Pan, J. L. and Leung, C. K. Y. (2005), "FRP debonding under the presence of multiple cracks along a concrete beam." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong, 299-304.
  40. Pan, J.L. and Leung, Christopher K.Y. (2007), ''Debonding along the FRP-concrete interface under combined pulling/peeling effects." Engineering Fracture Mechanics, 74(1-2), 132-150. https://doi.org/10.1016/j.engfracmech.2006.01.022
  41. Rahimi, H. and Hutchinson, A. (2001), "Concrete beams strengthened with externally bonded FRP plates", ASCE Journal of Composites for Construction, 5(1), 44-56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  42. Saadatmanesh, H. and Ehsani, M. R. (1991), "RC beams strengthened with GFRP plates. I: Experimental study." ASCE Journal of Structural Engineering,117 (11), 3417-3433. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417)
  43. Sebastian W. M. (2001), "Significance of midspan debonding failure in FRP-plated concrete beams." ASCE Journal of Structural Engineering, 127(7), 792-798. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(792)
  44. Seim, W., Hörmann, M., Karbhari, V. and Seible, F. (2001), "External FRP post strengthening of scaled concrete slabs." ASCE Journal of Composites for Construction, 5(2), 67-75. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(67)
  45. Spadea, G., Swamy, R. N. and Bencardino, F. (2001), "Strength and ductility of RC beams repaired with bonded CFRP laminates." ASCE Journal of Bridge Engineering, 6(5), 345-355.
  46. Smith, S.T. and Gravina, R. J. (2005), "Critical debonding length in FRP flexurally strengthened RC Beams." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong, 277-282.
  47. Smith, S.T. and Gravina, R.J. (2007), "Modeling debonding failure in FRP flexurally strengthened RC members using a local deformation model." ASCE Journal of Composites for Construction, 11(2), 184-191. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(184)
  48. Taljsten, B. (1996), "Strengthening of concrete prism using the plate-bonding technique." International Journal of Fracture, 81, 253-266.
  49. Takeo, K., Matsushita, H., Sagawa, Y. and Ushigome, T. (1999), "Experiment of RC beam reinforced with CFRP adhesive method having variety of shear-span ratio." Proceedings of the Japan Concrete Institute, 21(2), 205-210.
  50. Teng, J. G., Chen, J. F., Smith, S. T. and Lam, L. (2002), "FRP Strengthened RC Structures", Wiley, West Sussex, U.K.
  51. Teng, J. G., Smith, S. T., Yao, J. and Chen, J. F. (2003), "Intermediate crack-induced debonding in RC beams and slabs." Construction and Building Materials, 17(6-7), 447-462. https://doi.org/10.1016/S0950-0618(03)00043-6
  52. Teng, J. G., Yuan, H. and Chen, J. F. (2006); "FRP-to-concrete interfaces between two adjacent cracks : Theoretical model for debonding failure." International Journal of Solids and Structures, 43(18-19), 5750-5778. https://doi.org/10.1016/j.ijsolstr.2005.07.023
  53. Triantafillou, R. C. and Plevris, N. (1992), "Strengthening of RC beams with epoxy-bonded fiber-composite materials." Material and Structures, 25, 201-211. https://doi.org/10.1007/BF02473064
  54. Triantafillou T. C. (1999), "Guidelines for the Dimensioning of Reinforced Concrete Elements Strengthened with Sika Carbondur/Sikawrap." University of Patras, Greece.
  55. Ueda, T., Yamaguchi, R., Shoji, K. and Sato, Y. (2002), "Study on behavior in tension of reinforced concrete members strengthened by carbon fiber sheet." ASCE J. Composites for Construction, 6(3), 168-174. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:3(168)
  56. Ueda, T. and Dai, J. (2005), "Mode II fracture energy of FRP-concrete interfaces: its evaluation and roles in interface modeling and anchorage design." Proceedings of the 11th International Conference on Fracture, Paper No.4302 (CD-ROM), Turin, Italy.
  57. Wan, B., Sutton, M., Petrou, M.F., Harries, K.A. and Li, N. (2004), "Investigation of Bond between FRP and Concrete Undergoing Global Mixed Mode I/II Loading." ASCE J. Eng. Mech. 130(12), 1467-1475.
  58. Wang, J. (2006), "Cohesive zone model of intermediate crack-induced debonding of FRP-plated concrete beam." International Journal of Solids and Structures, 43(21), 6630-6648. https://doi.org/10.1016/j.ijsolstr.2006.01.013
  59. Wu, Z. S. and Niu, H. D. (2000), "Shear transfer along FRP-concrete interface in flexural members." Journal of Material, Concrete Structures and Pavements", 49(662), 231-245.
  60. Wu, Z. S. and Niu, H. D. (2007), "Prediction of crack-induced debonding failure in R/C Structures flexurally strengthened with externally bonded FRP composites." Doboku Gakkai Ronbunshuu E, 63(4), 620-639. https://doi.org/10.2208/jsceje.63.620
  61. Yao, J., Teng, J.G. and Lam, L. (2005), "Experimental study on intermediate crack debonding in FRP-Strengthened RC flexural members." Advances in Structural Engineering, 8(4), 365-396. https://doi.org/10.1260/136943305774353106
  62. Zarnic, R., Gostic, S., Bosiljkov, V. and Bokan-Bosiljkov, V. (1999), "Improvement of bending load-bearing capacity by externally bonded plates." Proceedings of Creating with Concrete, Dhir and Henderson (eds), London, Thomas Telford, 433-442.
  63. Zhang, G. F., Kishi, N., Mikami, H. and Komuro, M. (2005), "a numerical prediction method for flexural behavior of RC beams reinforced with FRP sheet." Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005, Hong Kong, 215-220.

피인용 문헌

  1. Modeling of Tension Stiffening Behavior in FRP-Strengthened RC Members Based on Rigid Body Spring Networks vol.27, pp.6, 2012, https://doi.org/10.1111/j.1467-8667.2011.00741.x
  2. Fracture Criterion for Carbon Fiber Reinforced Polymer Sheet to Concrete Interface Subjected to Coupled Pull-Out and Push-Off Actions vol.12, pp.5, 2009, https://doi.org/10.1260/136943309789867917
  3. Intermediate crack-induced debonding analysis for RC beams strengthened with FRP plates vol.56, pp.3, 2015, https://doi.org/10.12989/sem.2015.56.3.473
  4. Intermediate crack-induced debonding in RC beams externally strengthened with prestressed FRP laminates vol.32, pp.23, 2013, https://doi.org/10.1177/0731684413492574
  5. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2008, https://doi.org/10.12989/sem.2011.38.4.479
  6. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2008, https://doi.org/10.12989/sem.2011.38.4.479
  7. Debonding failure analysis of prestressed FRP strengthened RC beams vol.66, pp.4, 2008, https://doi.org/10.12989/sem.2018.66.4.543