Steel and Composite Structures

  • 제8권4호
  • /
  • Pages.265-280
  • /
  • 2008
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration analysis of steel frames with semi-rigid connections on an elastic foundation

  • Vu, Anh Q. (School of Civil & Environmental Engineering Georgia Institute of Technology Atlanta) ;
  • Leon, Roberto T. (School of Civil & Environmental Engineering Georgia Institute of Technology Atlanta)
  • 투고 : 2006.01.09
  • 심사 : 2007.03.08
  • 발행 : 2008.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

An investigation on the combined effect of foundation type, foundation flexibility, axial load and PR (semi-rigid) connections on the natural frequencies of steel frames is presented. These effects were investigated using a suitable modified FE program for cases where the foundation flexibility, foundation connectivity, and semi-rigid connections could be treated as equivalent linear springs. The effect of axial load on the natural frequency of a structure was found to be significant for slender structures subjected to high axial loads. In general, if columns of medium slenderness are designed without consideration of axial load effects, the frequency of the structure will be overestimated. Studies on the 3-story Los Angeles PR SAC frame indicate that the assumption of rigid connections at beam-column and column-base interfaces, as well as the assumption of a rigid foundation, can lead to significant errors if simplified design procedures are used. These errors in an equivalent static analysis are expected to lead to even more serious problems when considering the effect of higher modes under a non-linear dynamic analysis.

키워드

참고문헌

  1. AISC (2005). Manual of Steel Construction - Load and Resistance Factor Design Third Edition, American Institute of Steel Construction, Inc., Chicago.
  2. Anh, V.Q. (2002). "Stability analysis of steel frames with semi-rigid connections and rigid zones by using PDelta effect." Vietnam Journal of Mechanics, Vol 24, No 1, pp. 14-24.
  3. ASCE - Task Committee on Effective Length. (1997). Effective Length and Notional Load Approaches for Assessing Frame Stability: Implications for American Steel Design, American Society of Civil Engineers, New York.
  4. ASCE7 (2002). Minimum Design Loads for Buildings and Other Structures ASCE 7-02, American Society of Civil Engineers, Reston, VA.
  5. Bowles, J.E. (1988). Foundation Analyses and Design, McGraw-Hill, New York.
  6. Chan, S. L., and Chui, P.P.T (2000). Non-Linear Static and Cyclic Analysis of Steel Frames with Semi-Rigid Connections, Elsevier Science Ltd, London.
  7. Chen, W. F., Goto, Y. and Liew, J. Y (1996), Stability Design of Semi-rigid Frames, Wiley-Interscience, New York
  8. Cook, R. D., Malkus, D. S., Plesha, M. E., and Witt R. J (2001). Concepts and Applications of Finite Element Analysis. Third Edition, Wiley, New York.
  9. Faella. C, Piluso. V, Rizzano. G (2000). Structural Steel Semirigid Connections - Theory, Design and Software, CRC Press, Boca Raton.
  10. Hayalioglu, M. S., and Degertekin, S. O. (2005). "Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization," Computers and Structures, Vol. 83, No. 21-22, pp 1849-1863. https://doi.org/10.1016/j.compstruc.2005.02.009
  11. Ivanyi., M. and Baniotopoulos. C.C. (2000) Semi-rigid Joints in Structural Steelwork. Springer Verlag, Vienna.
  12. James, M. L., Smith, G. M., and Wolford, J. C. (1994). Vibration of Mechanical and Structural Systems with Microcomputer Applications. Second Edition, Harper Collins, New Ork
  13. Jaspart. J. P, and Vandegans, D. (1998). "Application of the component method to column bases," Journal of Constructional Steel Research, Vol. 48 pp. 89-106. https://doi.org/10.1016/S0143-974X(98)90196-1
  14. Leon, R.T. (1994) "Composite Semi-Rigid Construction," AISC Engineering Journal, Vol. 31, No.2, pp. 57-67.
  15. Leon., R.T., Hoffman., J.J., and Staeger, T. (1996). Steel Design Guide Series 8 - Partially Restrained Composite Connections. AISC, Chicago.
  16. Liew, R.J.P, Yu, C. H, Ng, H. Y, and Shanmugam. N. E. (1997). "Testing of Semi-rigid Unbraced Frames for Calibration of Second-order Inelastic Analysis," J. Constr. Steel Res., Vol. 41, No. 2/3, pp. 159-195 https://doi.org/10.1016/S0143-974X(97)00009-6
  17. Maison., B.F and Kasai, K. (2000). Seismic Performance of 3 and 9 story partially restrained moment frame buildings. SAC/BD-99/16, SAC Joint Venture, Sacramento.
  18. Morfidis, K., I. and Avramidis, E. ( 2002). " Formulation of a generalized beam element on a two-parameter elastic foundation with semi-rigid connections and rigid offsets, " International Journal of Computers & Structures, Vol 80, No. 25, pp 1919 -1934. https://doi.org/10.1016/S0045-7949(02)00226-2
  19. SAP 2000 (2001). Integrated Structural Analysis and Design Software, Computers and Structures, Inc., Berkeley.
  20. Selvadurai, A. P. S. (1979). Elastic analysis of soil - foundation interaction, Elsevier, London.
  21. Tram, N., Anh, V.Q. and Hien, N.M. (2001). "Vibration Analysis of Steel Frames with Semi-rigid Connections and Rigid-Zones,." Proceeding of the National Conference on Engineering Mechanics, Viet Nam National University Publishing House, Hanoi, pp. 205 - 212.
  22. Wang, Y.H., Tham, L.G., and Cheung, Y.K. (2005). "Beams and plates on elastic foundations: a review," Progress in Structural Engineering and Materials, Vol. 7, No. 4, pp. 174-82 https://doi.org/10.1002/pse.202

피인용 문헌

  1. Experimental evaluation on the seismic performance of steel knee braced frame structures with energy dissipation mechanism vol.11, pp.1, 2011, https://doi.org/10.12989/scs.2011.11.1.077
  2. Improving seismic performance of framed structures with steel curved dampers vol.130, 2017, https://doi.org/10.1016/j.engstruct.2016.09.063
  3. Free vibration of an axially functionally graded pile with pinned ends embedded in Winkler-Pasternak elastic medium vol.40, pp.4, 2008, https://doi.org/10.12989/sem.2011.40.4.583
  4. Nonlinear P-Δ analysis of steel frames with semi-rigid connections vol.14, pp.1, 2008, https://doi.org/10.12989/scs.2013.14.1.001
  5. Tapered beam-column analysis by analytical solution vol.172, pp.11, 2008, https://doi.org/10.1680/jstbu.18.00062