DOI QR코드

DOI QR Code

Probabilistic analysis of a partially-restrained steel-concrete composite frame

  • Amadio, C. (Department of Civil and Environmental Engineering, University of Trieste)
  • 발행 : 2008.02.25

초록

The paper investigates the seismic performance of a Partially-Restrained (PR) steel-concrete composite frame using the probabilistic approach. The analysed frame was tested at the ELSA laboratory of the Joint Research Centre of Ispra (Italy), while the representative beam-to-column composite connections were tested at the Universities of Pisa, Milan and Trento (Italy). The component modelling of both interior and exterior composite joints is described first, including the experimental-numerical validation. The Latin Hypercube method has been used to draw the probabilistic distribution curves of joints, and then the whole PR composite frame has been analysed. Pushover and incremental dynamic analyses have been carried out using the non-linear FE code SAP2000 version 9.1. The fragility and performance curves of the PR composite frame have been determined for four damage limit states.

키워드

참고문헌

  1. Altug Erberik, M. and Elnashai Amr, S. (2004), "Fragility analysis of flat-slab structures", Eng. Struct., Elsevier, 937-947.
  2. Augusti, G., Baratta, A. and Casciati, F. (1984), Probabilistic Methods in Structural Engineering, Chapman & Hall, London.
  3. Bazzurro, P. and Cornell, C. A. (1994), "Seismic hazard analysis of square confined concrete columns", J. Struct. Div, ASCE 1982; ST 4; 929-50.
  4. Benjamin, J. and Cornell, C. A. (1970), Probabilistic, Statistics and Decision for Civil Engineers, McGraw-Hill, New-York.
  5. Bertero, R. D. and Bertero, V. V. (2002), "Performance-based seismic engineering: the need for a reliable conceptual comprehensive approach", Earthq. Eng. Struct. Dyn., 31(3), 627-652. https://doi.org/10.1002/eqe.146
  6. Bursi, O. S., Caramelli, S., Fabbrocino, G., Molina, J., Salvatore, W., Taucer, F., Tremblay, R. and Zandonini, R., (2004), "3D Full Scale Seismic Testing of a Steel-Concrete Composite Building at ELSA", Report, Institute for the Protection and the Security of the Citizen, European Laboratory for Structural Assessment (ELSA), Ispra (VA).
  7. CEN, European Committee for Standardisation (1992), "Eurocode 4. Common Unified Rules for Composite Steel and Concrete Structures", ENV 1994-1-1, Brussels.
  8. CEN, European Committee for Standardisation (1994), "Eurocode 3. Proposed Annex J for ENV 1993-1-1", Brussels.
  9. CEN, European Committee for Standardization (1994), "Eurocode 8. Design provisions for earthquake resistance of structures", Brussels.
  10. CEN, European Committee for Standardisation (1996), "Eurocode 4. Proposed Annex J for ENV 1994-1-1", Brussels.
  11. CEN, European Committee for Standardisation (1996), "Eurocode 8. Design provisions for earthquake resistance structure", ENV 1998-1-1, Brussels.
  12. Cornell, C. A. and Krawinkler, H. (2000), "Progress and challenges in seismic performance assessment", http://peer.berkeley.edu / news/ 2000spring/ performance/ html.febwetg4wt4.
  13. Dymitiotis, C., Kappos, A. J. and Chryssanthopoulos, M. K. (1999), Seismic reliability of RC frames with uncertain drift and member capacity", J Struct. Eng., ASCE, 125(9), 1038-47. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1038)
  14. Faella, C., Piluso, V. and Rizzano, G. (1998), "Experimental analysis of bolted connections: Snug versus preloaded bolts", J Struct Eng, ASCE, 124(7), 765-774. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(765)
  15. Faella, C., Piluso, V. and Rizzano, G. (2000), StructuraL Steel Semirigid Connections, CRC PRESS.
  16. FEMA 273. (1997), "NEHRP Guidelines for the seismic rehabilitation of buildings", Federal Emergency Management Agency, Washington.
  17. FEMA 356. (2000), "Prestandard and commentary for the seismic rehabilitation of buildings", Federal Emergency Management Agency, Washington.
  18. Hibbit, Karlsson & Sorensen Inc. (1997), Abaqus, Version 5.7, U.S.A.
  19. Mwafy, A. M. and Elnashai A. S. (2001), " Static pushover versus dynamic collapse analysis of RC buildings", Eng. Struct, 23, 407-424. https://doi.org/10.1016/S0141-0296(00)00068-7
  20. Olsson, A., Sandberg, G. and Dahlblom O. (2003), "On Latin hypercube sampling for structural reliability analysis", Structural Safety, Elsevier, 25, 47-68. https://doi.org/10.1016/S0167-4730(02)00039-5
  21. Park, Y. J., Ang, AH-S. and Wenn, Y. K. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., ASCE, 111(4), 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  22. Piluso V., Rizzano G. and Totoli G. (2003), "Progettazione a completo ripristino di resistenza di collegamenti flangiati trave colonna: approccio probabilistico", Costruzioni Metalliche, LV(2003), n. 1.
  23. Rubinstein R. Y. (1981), Simulation and the Monte Carlo method, John Wiley & Sons.
  24. Sakurai S., Ellingwood B. and Kushiyama S. (2001), "Probabilistic study of the behaviour of steel frames with partially restrained connections", Eng. Struct., 23(2001), 1410-1417. https://doi.org/10.1016/S0141-0296(01)00052-9
  25. Salvatore, W., Braconi, A., Bursi, O. S. and Tramblay, R. (2004), "Partial Strength beam-to-Column Joint for High Ductile Steel-Concrete Composite MR Frames", Paper ${n^{\circ}}$ 2829 of the 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August.
  26. Sap2000 version 9.1 (2004), Computer and Structures, Inc, Berkeley, CA.
  27. SEAOC, Structural Engineers Association of California (1995), "Vision 2000, Performance-based seismic engineering", Sacramento, CA.
  28. Song, J. and Ellingwood, B. R. (1999), "Seismic reliability of special moment steel frames with welded connections", J. Struct. Eng., ASCE, 125(4), 372-384. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(372)
  29. Vamvatsikos, D. and Cornell, C. A. (2002), " Incremental dynamic analysis", Earthq. Eng. Struct. Dyn. 3, 491-514.

피인용 문헌

  1. Probabilistic Nonlinear Response Analysis of Steel-Concrete Composite Beams vol.140, pp.1, 2014, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000803