Computers and Concrete

  • 제5권6호
  • /
  • Pages.545-558
  • /
  • 2008
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analysis on IBEM for consideration on reinforced concrete slab resistance

  • Kyung, Je-Woon (Construction Division 1, Korea Institute of Construction & Transportation Technology Evaluation and Planning (KICTEP)) ;
  • Tae, Sung-Ho (School of Architecture & Architectural Engineering, Hanyang University) ;
  • Lee, Han-Seung (School of Architecture & Architectural Engineering, Hanyang University) ;
  • Lee, Sung-Bok (Housing and Urban Research Institute, Korea National Housing Corporation)
  • 투고 : 2007.11.05
  • 심사 : 2008.10.14
  • 발행 : 2008.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The corrosion of RC structures demonstrates very complicated forms of deterioration intermingled together but all pointing to a decrease in the durability of RC structures due to the corrosion of reinforcing bars. Until now, nondestructive techniques, such as half-cell potential and polarization resistance, have been widely available in the world. The former provides information on the probability of corrosion while the latter is associated with information concerning corrosion rates. Inversion by the boundary element method (IBEM) was developed for considering concrete resistivity. The applicability of the procedure was examined through a numerical analysis and electrolytic tests for RC slabs. A distribution in such concrete resistivity is relatively inhomogeneous including cracks on the surface of slabs. Regarding cracks in concrete, the relative coefficient of concrete resistance was introduced to perform its analysis. Further, the procedure will be developed to identify the corroded region visually using 3-D VRML.

키워드

과제정보

연구 과제 주관 기관 : Hanyang University

참고문헌

  1. Andrade, C. and Alonso, C. (2001), "On-site measurements of corrosion rate of reinforcements", Constr. Build. Mater., 15(2), 141-145. https://doi.org/10.1016/S0950-0618(00)00063-5
  2. ASTM C876 (1991), Standards Test Method for Half Cell Potentials of Reinforcing Steel in Concrete.
  3. Brebbia, C.A. (1978), The Boundary Element Method for Engineers, Pentech Press Ltd., London.
  4. Chris, M. and Bruce, C. (1997), Teach yourself VRML2 in 21 days, San.Enet, NY.
  5. Dubravka, B., Dunja, M., and Dalibor, S. (2000), "Non-destructive corrosion rate monitoring for reinforced concrete structures", Proceedings of 15th WCNDT, Roma, October.
  6. Fontana, G.. (1987), Corrosion Engineering. McGrawHill, NY.
  7. Hartman, J. (1996), VRML 2.0 Handbook, Addison-Wesley, NY.
  8. Hietpas, K., Ervin, B., Banasiak. J., Pointer, D., Kuchma, D.A., Reis, H., and Bernhard, T. (2005), "Ultrasonics and electromagnetics for a wireless corrosion sensing system embedded in structrual concrete", Smart Struct. Syst., 1(3), 267-282. https://doi.org/10.12989/sss.2005.1.3.267
  9. Jaggi, S., Bohni, H., and Elesner, B. (2001), "Macrocell corrosion of steel in concrete-experiments and numerical modelling", Proceedings of Eurocorr 2001, Milan, September.
  10. Kyung, J.W. Tae, S.H. Lee, H.S. Alver, Y., and Yoo, J.H. (2007), "IBEM analyses on half-cell potential measurement for NDE of rebar corrosion", Comput. Concrete, 2(4), 285-298.
  11. Kyung, J.W., Yokota, M., Leelalerkiet, V., and Ohtsu, M. (2005), "Visual reality presentation for nondestructive evaluation of rebar corrosion in concrete based on inverse BEM", The Korean Society for Nondestructive Testing, 25(3), 157-162.
  12. Lee, H.S. Kage, T. Noguchi, T., and Tomosawa, T. (2003), "An experimental study on the retrofitting effects of reinforced concrete columns damaged by rebar corrosion strengthened with carbon fiber sheets", Cement Concrete Res., 33, 563. https://doi.org/10.1016/S0008-8846(02)01004-9
  13. Maurel, O. (2005), "Relation between total degradation of steel concrete bond and degree of corrosion of rc beams experimental and computational studies", Comput. Concrete, 2(1), 1-18. https://doi.org/10.12989/cac.2005.2.1.001
  14. Okada, K. Kobayashi, K., and Miyagawa, T. (1988), "Influence of Longitudinal cracking due to reinforcement concrete members", ACI Mater. J., 85, 134.
  15. Qian, S.Y. and Chagnon, N. (2001) "Evaluation of corrosion of reinforcement in repaired concrete", Structural Faults and Repair, London, UK.
  16. Tae, S.H., Kyung, J.W., and Ujiro, J. (2006), "Service life estimation of concrete structures reinforced with crbearing rebars under macrocell corrosion conditions induced by cracking in cover concrete", The Iron and Steel institute of Japan International, 47(6), 875-882.
  17. Yokota, M, Kyung, J.W., and Lee, H.S. (2008), "Environmental influence on the corrosion rate of steel bars embedded in concrete", The Iron and Steel institute of Japan International, 48(2), 230-234. https://doi.org/10.2355/isijinternational.48.230
  18. Yokota, M. (1998), "Corrosion rate measurements of reinforcing bars in real concrete structures using ac impedance method", Proceeding 7th European Conference on NDT, Copenhagen, May
  19. Yokota, M. (1999), "Study on corrosion monitoring of reinforcing steel bars in 36-year-old actual concrete structures", Concrete Library of JSCE, 33, 154-164.