DOI QR코드

DOI QR Code

Force transfer mechanisms for reliable design of reinforced concrete deep beams

  • Park, Jung-Woong (Department of Civil and Environmental Engineering, Sejong University) ;
  • Kim, Seung-Eock (Department of Civil and Environmental Engineering, Sejong University)
  • Received : 2007.12.26
  • Accepted : 2008.07.07
  • Published : 2008.09.10

Abstract

In this paper, a strut-and-tie model approach has been proposed to directly calculate the amount of reinforcements in deep beams, and the force transfer mechanisms for this approach were investigated using linear finite element analysis. The proposed strut-and-tie model provides quite similar force transfer mechanisms to the results of linear finite element analysis for the 28 deep beams. The load-carrying capacities calculated from the proposed method are both accurate and conservative with little scatter or trends for the 214 deep beams. The deep beams have different concrete strengths including high-strength, various combinations of web reinforcements, and wide range of and a/d ratios. Good accuracy was also obtained using VecTor2, nonlinear finite element analysis tool based on the Modified Compression Field Theory. Since the proposed method provides a safe and reliable means for design of deep beams, this can serve to improve design provisions in future adjustments and development of design guidelines.

Keywords

References

  1. AASHTO (2004), AASHTO LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials. ACI
  2. Committee 318 (2005), Building Code Requirements for Reinforced Concrete (ACI 318-05) and Commentary (ACI 318R-05). American Concrete Institute
  3. Aguilar, G., Matamoros, A.B., Parra-Montesinos, G., Ramirez, J.A. and Wight, J.K. (2002), "Experimental evaluation of design procedures for shear strength of deep reinforced concrete beams", ACI Struct. J., 99(4), 539-548
  4. Anderson, N.S. and Ramirez, J.A. (1989), "Detailing of stirrup reinforcement", ACI Struct. J., 86(5), 507-515
  5. Batchelor, D.V.B. and Campbell, T.I. (1986), "Effectiveness factor for shear in concrete beams", J. Struct. Eng., ASCE, 112(6), 1464-1477 https://doi.org/10.1061/(ASCE)0733-9445(1986)112:6(1464)
  6. CEB-FIP (1993), CEB-FIP Model Code for Concrete Structures. Comite Euro-International du Beton/Federation International de la Precontrainte
  7. Chen, W.F. (2008), "Structural engineering: Seeing the big picture", KSCE J. Civil Eng., 12(1), 25-29 https://doi.org/10.1007/s12205-008-8025-7
  8. Clarke, A.P. (1951), "Diagonal tension in reinforced concrete beams", ACI J. Proc., 48(10), 145-156
  9. CSA Committee A23.3 (1994), Design of Concrete Structures: Structures (Design) - A National Standard of Canada. Canadian Standards Association
  10. Foster, S.J. (1992), Structural Behavior of Reinforced Concrete Deep Beams. Ph.D. Dissertation, School of Civil Engineering, Univ. of New South Wales
  11. Foster, S.J. and Gilbert, R.I. (1996), "The design of nonflexural members with normal and high-strength concretes", ACI Struct. J., 93(1), 3-10
  12. Foster, S.J. and Malik, A.R. (2002), "Evaluation of efficiency factor models used in strut-and-tie modeling of nonflexural members", J. Struct. Eng., ASCE, 128(5), 569-577 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:5(569)
  13. Guan, H. (2005), "Strut-and-tie model of deep beams with web openings - An optimization approach", Struct. Eng. Mech., 19(4), 361-379 https://doi.org/10.12989/sem.2005.19.4.361
  14. Hwang, S.J., Fang, W.H., Lee, H.J. and Yu, H.W. (2001), "Analytical model for predicting shear strength of squat walls", J. Struct. Eng., ASCE, 127(1), 43-50 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(43)
  15. Hwang, S.J. and Lee, H.J. (1999), "Analytical model for predicting shear strengths of exterior reinforced concrete beam-column joints for seismic resistance", ACI Struct. J., 96(5), 846-857
  16. Hwang, S.J. and Lee, H.J. (2000), "Analytical model for predicting shear strengths of interior reinforced concrete beam-column joints for seismic resistance", ACI Struct. J., 97(1), 34-44
  17. Hwang, S.J., Lu, W.Y. and Lee, H.J. (2000a), "Shear strength prediction for deep beams", ACI Struct. J., 97(3), 367-376
  18. Hwang, S.J., Lu, W.Y. and Lee, H.J. (2000b), "Shear strength prediction for reinforced concrete corbels", ACI Struct. J., 97(4), 543-552
  19. Hsu, T.T.C. and Zhang, L.X.B. (1997), "Nonlinear analysis of membrane elements by fixed-angle softened-truss model", ACI Struct. J., 94(5), 483-492
  20. Kong, F.K., Robins, P.J. and Cole, D.F. (1970), "Web reinforcement effects on deep beams", ACI J. Proc., 67(12), 1010-1017
  21. Marti, P. (1985), "Basic tools of reinforced concrete beam design", ACI Struct. J., 82(4), 46-56
  22. Oh, J.K. and Shin, S.W. (2001), "Shear strength of reinforced high-strength concrete deep beams", ACI Struct. J., 98(2), 164-173
  23. Park, J.W. and Kuchma, D. (2007), "Strut-and-tie model analysis for strength prediction of deep beams", ACI Struct. J., 104(6), 657-666
  24. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings. John Wiley and Sons
  25. Quintero-Febres, C.G., Parra-Montesinos, G. and Wight, J.K. (2006), "Strength of struts in deep concrete members designed using strut-and-tie method", ACI Struct. J., 103(4), 577-586
  26. Rogowsky, D.M., MacGregor, J.G. and Ong, S.Y. (1986), "Tests of reinforced concrete deep beams", ACI J. Proc., 83(4), 614-623
  27. Schafer, K. (1996), "Strut-and-tie models for the design of structural concrete", Notes of workshop, Department of Civil Engineering, National Cheng Kung University, Tainan, Taiwan
  28. Schlaich, J. and Schafer, K. (1991), "Design and detailing of structural concrete using strut-and-tie models", The Struct. Eng., 69(6), 113-125
  29. Schlaich, J., Schafer, K. and Jennewein, M. (1987), "Toward a consistent design of structural concrete", PCI J., 32(3), 75-149 https://doi.org/10.15554/pcij.03011987.75.85
  30. Smith, K.N. and Vantsiotis, A.S. (1982), "Shear strength of deep beams", ACI J. Proc., 79(3), 201-213
  31. Tan, K.H., Kong, F.K., Teng, S. and Guan, L. (1995), "High-strength concrete deep beams with effective span and shear span variations", ACI Struct. J., 92(4), 395-405
  32. Vecchio, F.J. (1989), "Nonlinear finite element analysis of reinforced concrete membranes", ACI J. Proc., 86(1), 26-35
  33. Vecchio, F.J. and Collins, M.P. (1982), "Response of reinforced concrete to in-plane shear and normal stresses", Report No. 82-03, Univ. of Toronto, Toronto, Canada
  34. Vecchio, F.J. and Collins, M.P. (1986), "Modified compression field theory for reinforced concrete elements subjected to shear", ACI J. Proc., 83(2), 219-231
  35. Vecchio, F.J. and Collins, M.P. (1993), "Compression response of cracked reinforced concrete", J. Struct. Eng., ASCE, 119(12), 3590-3610 https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3590)
  36. Vecchio, F.J. and Wong, P.S. (2003), VecTor2 and FormWorks User's Manual, Univ. of Toronto, Toronto, Canada
  37. Warwick, W.B. and Foster, S.J. (1993), Investigation into the efficiency factor used in nonflexural reinforced concrete member design. UNICIV Rep. No. R-320, School of Civil Engineering, Univ. of New South Wales, Kensington, Sydney, Australia