Structural Engineering and Mechanics

  • 제29권4호
  • /
  • Pages.455-467
  • /
  • 2008
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Postbuckling response and failure of symmetric laminated plates with rectangular cutouts under uniaxial compression

  • Singh, S.B. (Birla Institute of Technology and Science Pilani) ;
  • Kumar, Dinesh (Birla Institute of Technology and Science Pilani)
  • 투고 : 2008.02.15
  • 심사 : 2008.03.21
  • 발행 : 2008.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the buckling and postbuckling responses and the progressive failure of square symmetric laminates with rectangular cutouts under uniaxial compression. A detailed investigation is made to show the effects of cutout size and cutout aspect ratio on prebuckling and postbuckling responses, failure loads and failure characteristics of $(+45/-45/0/90)_{2s}$, $(+45/-45)_{4s}$ and $(0/90)_{4s}$ laminates. The 3-D Tsai-Hill criterion is used to predict the failure of a lamina while the onset of delamination is predicted by the interlaminar failure criterion. In addition, the effects of boundary conditions on buckling load, failure loads, failure modes and maximum transverse deflection for a $(+45/-45/0/90)_{2s}$ laminate with and without cutout have also been presented. It is concluded that square laminates with small square cutouts have more postbuckling strength than without cutout, irrespective of boundary conditions.

키워드

참고문헌

  1. Aggarwal, B.D. and Broutman, L.J. (1990), Analysis and Performance of Fiber Composites, 2nd Ed., Wiley, New York
  2. Akbulut, H. and Sayman, O. (2001), "An investigation on buckling of laminated plates with central square hole", J. Reinf. Plast. Comp., 20(13), 1112-1124 https://doi.org/10.1106/MN6W-FMDB-K7MJ-UQ08
  3. Akbulut, H. and Ural, T. (2007), "An investigation on buckling of composite laminated plates with corner circular notches", J. Thermoplast. Compos., 20(4), 371-387 https://doi.org/10.1177/0892705707079608
  4. Baba, B.O. (2007), "Buckling behavior of laminated composite plates", J. Reinf. Plast. Comp., 26(16), 1637-1655 https://doi.org/10.1177/0731684407079515
  5. Bailey, R. and Wood, J. (1996), "Stability characteristics of composite panels with various cutout geometries", Compos. Struct., 35, 21-31 https://doi.org/10.1016/0263-8223(96)00021-9
  6. Baltaci, A., Sarikanat, M. and Yildiz, H. (2006). "Buckling analysis of laminated composite circular plates with holes", J. Reinf. Plast. Comp., 25(7), 733-744 https://doi.org/10.1177/0731684406062065
  7. Britt, V.O. (1993), "Shear and compression buckling analysis for anisotropic panels with centrally located elliptical cutouts", Proc. of the 34rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, La Jolla, CA, April, 2240-2249
  8. Engelstad, S.P., Reddy, J.N. and Knight, N.F. (1992), "Postbuckling response and failure prediction of Graphite- Epoxy plates loaded in compression", AIAA J., 30(8), 2106-2113 https://doi.org/10.2514/3.11187
  9. Eiblmeier, J. and Loughlan, J. (1997), "The Influence of reinforcement ring width on the buckling response of carbon fibre composite panels with circular-cutouts", Compos. Struct., 38, 609-622 https://doi.org/10.1016/S0263-8223(97)00099-8
  10. Guo, S.J. (2007), "Stress concentration and buckling behaviour of shear loaded composite panels with reinforced cutouts", Compos. Struct., 80(1), 1-9 https://doi.org/10.1016/j.compstruct.2006.02.034
  11. Jain, P. and Kumar, A. (2004), "Postbuckling response of square laminates with a central circular/elliptical cutout", Compos. Struct., 65(2), 179-185 https://doi.org/10.1016/j.compstruct.2003.10.014
  12. Kong, C.W., Hong, C.S. and Kim C.G. (2001), "Postbuckling strength of composite plate with a hole", J. Reinf. Plast. Comp., 20(6), 466-481 https://doi.org/10.1177/073168401772678652
  13. Larsson, P.L. (1987), "On buckling of orthotropic compressed plates with circular holes", Compos. Struct., 7(2), 103-121 https://doi.org/10.1016/0263-8223(87)90002-X
  14. Lin, C.C. (1989), "Buckling of laminated plates with holes", J. Compos. Mater., 23, 536-553 https://doi.org/10.1177/002199838902300601
  15. Lee, H.H. and Hyer, M.W. (1993), "Postbuckling of composite plates with holes", AIAA J., 31(7), 1293-1298 https://doi.org/10.2514/3.11766
  16. Martin, J. (1972), "Buckling and postbuckling of laminated composite square plates with reinforced central holes", Ph.D. Dissertation, Case Western Reserve University, Cleveland, Ohio
  17. Marshall, I.H., Little, W. and E1-Tayeby, M.M. (1987), "Membrane stress distributions in post-buckled composite plates with circular holes", Sixth International Conference on Composite Materials and Second European Conference on Composite Materials, London and New York, Elsevier Applied Science, 5.57-5.68
  18. Nemeth, M.P. (1988), "Buckling behavior of compression loaded symmetrically laminated angle-ply plates with holes", AIAA J. 26, 330-336 https://doi.org/10.2514/3.9893
  19. Nemeth, M.P. (1996), "Buckling and postbuckling behavior of laminated composite plates with a cutout", NASA TP 3587
  20. Robert, M. Jones (1975), Mechanics of Composite Materials, 1st Ed., McGraw-Hill Kogakusha Ltd., Tokyo
  21. Rouse, M. (1990), "Effect of cutouts or low-speed impact damage on the postbuckling behavior of composite plates loaded in shear", Proceedings of the AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics and Materials Conference, Long Beach, California, 877-891
  22. Reddy, Y.S.N. and Reddy, J.N. (1992), "Linear and nonlinear failure analysis of composite laminates with transverse shear", Compos. Sci. Technol., 44(4), 227-255 https://doi.org/10.1016/0266-3538(92)90015-U
  23. Srivatsa, K.S. and Krishna Murty, A.V. (1992), "Stability of laminated composite plates with cut-outs", Comput. Struct., 43, 273-279 https://doi.org/10.1016/0045-7949(92)90144-O
  24. Singh, S.B. (1996), "Postbuckling response, strength and failure of symmetric laminates", Ph.D. Dissertation, Indian Institute of Technology, Kanpur, India
  25. Singh, S.B., Kumar, A. and Iyengar, N.G.R. (1997), "Progressive failure of symmetrically laminated plates under uniaxial compression", Struct. Eng. Mech., 5(4), 433-450 https://doi.org/10.12989/sem.1997.5.4.433
  26. Singh, S.B., Kumar, A. and Iyengar, N.G.R. (1998a), "Progressive failure of symmetric laminated plates under in-plane shear: I-positive shear", Struct. Eng. Mech., 6(2), 143-159 https://doi.org/10.12989/sem.1998.6.2.143
  27. Singh, S.B., Kumar, A. and Iyengar, N.G.R. (1998b), "Progressive failure of symmetric laminated plates under in-plane shear: II-negative shear", Struct. Eng. Mech., 6(7), 757-772 https://doi.org/10.12989/sem.1998.6.7.757
  28. Singh, S.B. and Kumar, A. (1998c), "Postbuckling response and failure of symmetric laminates under in-plane shear", Compos. Sci. Technol., 58, 1949-1960 https://doi.org/10.1016/S0266-3538(98)00032-3
  29. Turvey, G.J. (1980a), "An initial flexural analysis of symmetrically laminated cross-ply rectangular plate", Int. J. Solids Struct., 16(5), 451-463 https://doi.org/10.1016/0020-7683(80)90043-8
  30. Turvey, G.J. (1980b), "Flexural failure analysis of angle-ply laminates of GFRP and CFRP", J. Strain Anal., 15(1), 43-49 https://doi.org/10.1243/03093247V151043
  31. Turvey, G.J. (1980c), "A study of onset of flexural failure in cross-ply laminated strips", Fiber Sci. Technol., 13(5), 325-356 https://doi.org/10.1016/0015-0568(80)90008-1
  32. Turvey, G.J. (1981), "Initial flexural failure of square, simply supported, angle-ply plates", Fiber Sci. Technol., 15(1), 47-63 https://doi.org/10.1016/0015-0568(81)90031-2
  33. Turvey, G.J. (1982), "Uniformly loaded, antisymmetric cross-ply laminated, rectangular plates: an initial flexural failure analysis", Fiber Sci. Technol., 16(1), 1-10 https://doi.org/10.1016/0015-0568(82)90010-0
  34. Turvey, G.J. (1987), "Effect of shear deformations on the onset of flexural failure in symmetric cross-ply laminated rectangular plates", Composite Structure, 4th Ed., I. H. Marshall, Elsevier Applied Sciences London, 141-163
  35. Turvey, G.J. and Osman, M.Y. (1989), "Exact and approximate linear and nonlinear initial failure analysis of laminated Mindlin plates in flexural", Composite Structure, 5th Ed., I. H. Marshall, Elsevier Applied Sciences London, 133-171
  36. Yazici, M., Ozcan, R., Ulku, S. and Okur, I., (2003), "Buckling of composite plates with U-shaped cutouts", J. Compos. Mater., 37, 2179-2195 https://doi.org/10.1177/002199803038109

피인용 문헌

  1. Postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear vol.92, pp.12, 2010, https://doi.org/10.1016/j.compstruct.2010.05.008
  2. Stability and failure of composite laminates with various shaped cutouts under combined in-plane loads vol.43, pp.2, 2012, https://doi.org/10.1016/j.compositesb.2011.09.005
  3. Global analysis of drill string buckling in the channel of a curvilinear bore-hole vol.40, 2017, https://doi.org/10.1016/j.jngse.2017.01.021
  4. Load interaction curves and postbuckling response of composite laminate with circular cutout under combined in-plane loading vol.42, pp.5, 2011, https://doi.org/10.1016/j.compositesb.2011.03.002
  5. Buckling Analysis of Laminated Composite Panel with Elliptical Cutout Subject to Axial Compression vol.2012, 2012, https://doi.org/10.1155/2012/171953
  6. Effects of flexural boundary conditions on failure and stability of composite laminate with cutouts under combined in-plane loads vol.45, pp.1, 2013, https://doi.org/10.1016/j.compositesb.2012.08.016
  7. Effects of Boundary Conditions on Postbuckling Strengths of Composite Laminate with Various Shaped Cutouts under In-Plane Shear vol.03, pp.02, 2013, https://doi.org/10.4236/ojcm.2013.32006
  8. Effects of boundary conditions on buckling and postbuckling responses of composite laminate with various shaped cutouts vol.92, pp.3, 2010, https://doi.org/10.1016/j.compstruct.2009.08.049
  9. Cutout shape and size effects on response of quasi-isotropic composite laminate under uni-axial compression vol.35, pp.3, 2010, https://doi.org/10.12989/sem.2010.35.3.335
  10. Nonlinear spectral collocation analysis of imperfect functionally graded plates under end-shortening vol.66, pp.5, 2008, https://doi.org/10.12989/sem.2018.66.5.557
  11. Buckling and postbuckling response of hybrid composite plates under uniaxial compressive loading vol.27, pp.None, 2020, https://doi.org/10.1016/j.jobe.2019.101002
  12. Buckling and postbuckling response of hybrid composite plates under uniaxial compressive loading vol.27, pp.None, 2020, https://doi.org/10.1016/j.jobe.2019.101002