DOI QR코드

DOI QR Code

Design of tensegrity structures using artificial neural networks

  • Panigrahi, Ramakanta (Department of Civil Engineering, Indian Institute of Technology Delhi) ;
  • Gupta, Ashok (Department of Civil Engineering, Indian Institute of Technology Delhi) ;
  • Bhalla, Suresh (Department of Civil Engineering, Indian Institute of Technology Delhi)
  • Received : 2007.05.03
  • Accepted : 2008.02.18
  • Published : 2008.05.30

Abstract

This paper focuses on the application of artificial neural networks (ANN) for optimal design of tensegrity grid as light-weight roof structures. A tensegrity grid, 2 m ${\times}$ 2 m in size, is fabricated by integrating four single tensegrity modules based on half-cuboctahedron configuration, using galvanised iron (GI) pipes as struts and high tensile stranded cables as tensile elements. The structure is subjected to destructive load test during which continuous monitoring of the prestress levels, key deflections and strains in the struts and the cables is carried out. The monitored structure is analyzed using finite element method (FEM) and the numerical model verified and updated with the experimental observations. The paper then explores the possibility of applying ANN based on multilayered feed forward back propagation algorithm for designing the tensegrity grid structure. The network is trained using the data generated from a finite element model of the structure validated through the physical test. After training, the network output is compared with the target and reasonable agreement is found between the two. The results demonstrate the feasibility of applying the ANNs for design of the tensegrity structures.

Keywords

References

  1. ANSYS 9. (2007). www.ansys.com
  2. Argyris, J.H. and Scharpf, D.W. (1972), "Large deflection analysis of prestressed networks", J. Struct. Div. Proc., ASCE, 98(ST-3), 633-654
  3. Cakiroglu, E., Comez, I. and Erdol, R. (2005), "Application of artificial neural networks to a double receding contact problem with a rigid stamp", Struct. Eng. Mech., 21(2), 205-220 https://doi.org/10.12989/sem.2005.21.2.205
  4. Civalek, O. (2004), "Flexural and axial vibration analysis of beams with different support conditions using artificial neural networks", Struct. Eng. Mech., 18(3), 303-314 https://doi.org/10.12989/sem.2004.18.3.303
  5. Domer, B., Fest, E., Lalit, V. and Smith, I. (2003), "Combining dynamic relaxation method with artificial neural networks to enhance simulation of tensegrity structures", J. Struct. Eng., 129(5), 672-681 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(672)
  6. Fest, E., Shea, K. and Smith, I.F.C. (2004), "Active tensegrity structure", J. Struct. Eng., 130(10), 1454-1465 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:10(1454)
  7. Fuller, R.B. (1962), Tensile Integrity Structures, United States Patent No: 3 :063: 521
  8. Flood, I. (1989), "A neural network approach to the sequencing of construction tasks", Proc. of 6th Int. Symp. on Automation and Robotics Construction, San Francisco, USA, June
  9. Hanaor, A. (1993), "Double layer tensegrity grids as deployable structures", Int. J. Space Struct., 8(1-2), 135-143 https://doi.org/10.1177/0266351193008001-214
  10. IS 1835 (1976), Specification for Round Steel Wire for Ropes, Bureau of Indian Standards
  11. IS 1239 (1990), Mild Steel Tubes, Tubulars and Other Wrought Steel Fittings - Specification - Part 1: Mild Steel Tubes, Bureau of Indian Standards
  12. IS 1835 (1876), Specification for Round Steel Wire for Ropes, Bureau of Indian Standards
  13. IS 3459 (1977), Specification for Small Wire Ropes, Bureau of Indian Standards
  14. McCulloch, W.S. and Pitts, W. (1943), "A logical calculus of the ideas immanent in nervous activity", B. Math. Biophysics, 5, 115-133 https://doi.org/10.1007/BF02478259
  15. Motro, R. (2003), Tensegrity Structural Systems for the Future, Kogan Page Science, UK, London
  16. MATLAB 7. (2007), http://www.mathworks.com
  17. Panigrahi. R., Gupta, A., Bhalla, S. and Arora, K. (2005), "Application of artificial neural network for form finding of tensegrity structures", Proc. of 2nd Indian Int. Conf. on Artificial Intelligence (IICAI-05), Pune, India, December
  18. Panigrahi, R., Gupta, A. and Bhalla, S. (2007), "Dismountable steel tensegrity grids as light-weight roof structures", Steel Compos. Struct., (under review)
  19. Quirant, J., Kazi-Aoual, M.N. and Motro, R. (2003), "Designing tensegrity systems: the case of a double layer grid", Eng. Struct., 25(9), 1121-1130 https://doi.org/10.1016/S0141-0296(03)00021-X
  20. Shanker, R. (2005), "Estimation of axial force in tall buildings using artificial neural networks", M. Tech. Dissertation, Department of Civil Engineering, Indian Institute of Technology Delhi
  21. Sheck H.J. (1974), "The force density method for form finding and computation networks", Comput. Meth. Appl. Mech. Eng., 3, 115-134 https://doi.org/10.1016/0045-7825(74)90045-0
  22. Stern, I.P. (1999), "Development of design equations for self deployable N- strut tensegrity systems", M. S. Thesis, University of Florida
  23. Vishay Micro-Measurements (2005), P.O. box 27777, Raleigh North Carolina, 27611, USA. www.vishaymg.com

Cited by

  1. Damage assessment of tensegrity structures using piezo transducers vol.48, pp.6, 2013, https://doi.org/10.1007/s11012-012-9678-3
  2. Explicit expressions for inelastic design quantities in composite frames considering effects of nearby columns and floors vol.64, pp.4, 2008, https://doi.org/10.12989/sem.2017.64.4.437