DOI QR코드

DOI QR Code

Behaviour of welded beam-to-column joints subjected to the static load

  • Skejic, Davor (Department of Structural Engineering, Faculty of Civil Engineering, University of Zagreb) ;
  • Dujmovic, Darko (Department of Structural Engineering, Faculty of Civil Engineering, University of Zagreb) ;
  • Androic, Boris (Department of Structural Engineering, Faculty of Civil Engineering, University of Zagreb)
  • 투고 : 2006.03.24
  • 심사 : 2008.03.03
  • 발행 : 2008.05.10

초록

Neglecting the real joint behaviour in frame analysis may result in unrealistic predictions of the response and reliability of steel frames. The reliability of the prediction of main joint properties according to the component method (Eurocode 3-Part 1.8) still remains open to further investigation. The first step toward the solution is to compare the theoretical expressions given in EN 1993-1-8 and the experimental results. With that goal in mind six nominally the same, but really different specimens of welded beam-to-column joints subjected to static load were tested. The specimens present a combination of nominally identical structural elements produced in different European mills. This paper provides these tests, as well as their detailed evaulation and interpretation. All three joint structural properties (rotational stiffness, moment resistance and rotation capacity) have been considered. Four models for determining the plastic resistance out of experimental Mj-${\phi}$ curves have been applied. The results that have been discussed in detail, point to the fact that EN 1993-1-8 underestimates the real structural properties of the tested type of joint, as well as to the conclusion that detailed research of this problem needs to be conducted using the probabilistic reliability methods.

키워드

참고문헌

  1. Aribert, J.-M., Braham, M. and Lachal, A. (2004), "Testing of "simple" joints and their characterisation for structural analysis", J. Constr. Steel Res., 60, 659-681 https://doi.org/10.1016/S0143-974X(03)00135-4
  2. Beg, D., Zupancic, E. and Vayas, I. (2004), "On the rotation capacity of moment connections", J. Constr. Steel Res., 60, 601-620 https://doi.org/10.1016/S0143-974X(03)00132-9
  3. CEN: European Committee for Standardization (1990), "EN 10002-1:1990E, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature)", March, Brussels
  4. CEN: European Committee for Standardization (2004), "EN 10204:2004, Metallic products", October, Brussels
  5. CEN: European Committee for Standardization (2004), "EN 10025-2:2004, Hot rolled products of structural steels - Part 2", November, Brussels
  6. CEN: European Committee for Standardization (2005), "EN 1993-1-8:2005, Eurocode 3: Design of steel structures, Part 1.8: Design of joints", May, Brussels
  7. CoP (2005), Connection Program, Version 2005R02, RWTH Aachen, MSM Liege, ICCS Hoofddorp
  8. COSMOSM (2005), GeoStar V2.95
  9. Cruz, P.J.S., da Silva, L.S., Rodrigues, D.S. and Simoes, R.A.D. (1998), "Database for the semi-rigid behaviour of beam-to-column connections in seismic regions", J. Constr. Steel Res., 46, 233-234 https://doi.org/10.1016/S0143-974X(98)80023-0
  10. da Silva L.S., Santiago, A. and Vila Real, P. (2002), "Post-limit stiffness and ductility of end-plate beam-tocolum steel joint", Comp. Struct., 80(5-6), 515-531 https://doi.org/10.1016/S0045-7949(02)00014-7
  11. Girao Coelho, A.M., Bijlaard, F. S.K. and da Silva, L.S. (2004), "Experimental assessment of the ductility of extended end plate connections", Eng. Struct., 26, 1185-1206 https://doi.org/10.1016/j.engstruct.2000.09.001
  12. Girao Coelho, A.M., da Silva, L.S. and Bijlaard, F.S.K. (2005), "Ductility analysis of end plate beam-to-column joints", Proceedings of Eurosteel 2005, Maastricht, 4.10, 123-130
  13. Jaspart, J.P. (1997), "Contributions to recent advances in the field of steel joints, Column bases and further configurations for beam-to-column joints and beam splices", Aggregation thesis, University of Liege, Liege
  14. Skejic, D. (2005), Master of Science Thesis, "Reliability of semi-rigid beam-to-column welded joints", Department of Structural Engineering, Faculty of Civil Engineering, University of Zagreb, Zagreb (in Croatian)
  15. Szlendak, J.K. (2002), "Design moment-rotation characteristics for steel semi-rigid beam-column joints", Proceedings of Eurosteel 2002, Coimbra, 1059-1066

피인용 문헌

  1. Experimental research on load-bearing capacity of cast steel joints for beam-to-column vol.56, pp.1, 2015, https://doi.org/10.12989/sem.2015.56.1.067