Structural Engineering and Mechanics

  • 제28권6호
  • /
  • Pages.659-676
  • /
  • 2008
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Free vibration analysis of a uniform beam carrying multiple spring-mass systems with masses of the springs considered

  • Wu, Jia-Jang (Department of Marine Engineering, National Kaohsiung Marine University)
  • 투고 : 2006.11.23
  • 심사 : 2008.01.23
  • 발행 : 2008.04.20
⟨ 이전 논문 다음 논문 ⟩

초록

The reports regarding the free vibration analysis of uniform beams carrying single or multiple spring-mass systems are plenty, however, among which, those with inertia effect of the helical spring(s) considered are limited. In this paper, by taking the mass of the helical spring into consideration, the stiffness and mass matrices of a spring-mass system and an equivalent mass that may be used to replace the effect of a spring-mass system are derived. By means of the last element stiffness and mass matrices, the natural frequencies and mode shapes for a uniform cantilever beam carrying any number of springmass systems (or loaded beam) are determined using the conventional finite element method (FEM). Similarly, by means of the last equivalent mass, the natural frequencies and mode shapes of the same loaded beam are also determined using the presented equivalent mass method (EMM), where the cantilever beam elastically mounted by a number of lumped masses is replaced by the same beam rigidly attached by the same number of equivalent masses. Good agreement between the numerical results of FEM and those of EMM and/or those of the existing literature confirms the reliability of the presented approaches.

키워드

참고문헌

  1. Bathe, K.J. (1982), "Finite element procedures in engineering analysis", Prentice-Hall, Englewood Cliffs, New Jersey
  2. Carnahan, B., Luther, H.A. and Wilkes, J.O. (1977), Applied Numerical Methods, New York: Wiley
  3. Chang, T.P. and Chang, C.Y. (1998), "Vibration analysis of beams with a two degree-of-freedom spring-mass system", J. Solids Struct., 35(5-6), 383-401 https://doi.org/10.1016/S0020-7683(97)00037-1
  4. Chen, D.W. and Liu, T.L. (2006), "Free and forced vibrations of a tapered cantilever beam carrying multiple point masses", Struct. Eng. Mech., 23(2), 209-216 https://doi.org/10.12989/sem.2006.23.2.209
  5. Clough, R.W. and Penzien, J. (1975), Dynamics of Structures, McGraw-Hill, Inc. New York
  6. Dowell, E.H. (1979), "On some general properties of combined dynamic systems", J. Appl. Mech., ASME, 46, 206-209 https://doi.org/10.1115/1.3424499
  7. Ercoli, L. and Laura, P.A.A. (1987), "Analytical and experimental investigation on continuous beams carrying elastically mounted masses", J. Sound Vib., 114, 519-533 https://doi.org/10.1016/S0022-460X(87)80021-4
  8. Golub, G.H., Underwood R. and Wilkinson J.H. (1972), "The Lanczos algorithm for the symmetric Ax = Lambda * Bx Problem", Stanford University, Computer Science Department
  9. Gurgoze, M. (1996), "On the eigenfrequencies of a cantilever beam with attached tip mass and a spring-mass system", J. Sound Vib., 190, 149-162 https://doi.org/10.1006/jsvi.1996.0053
  10. Gurgoze, M. (1998), "On the alternative formulations of the frequency equation of a Bernoulli-euler beam to which several spring-mass systems are attached in-span", J. Sound Vib., 217, 585-595 https://doi.org/10.1006/jsvi.1998.1796
  11. Gurgoze, M. (1999), "Alternative formulations of the characteristic equation of a Bernoulli-euler beam to which several viscously damped spring-mass systems are attached in-span", J. Sound Vib., 223, 666-677 https://doi.org/10.1006/jsvi.1998.2146
  12. Gurgoze, M. (2005), "On the eigenfrequencies of a cantilever beam carrying a tip spring-mass system with mass of the helical spring considered", J. Sound Vib., 282, 1221-1230 https://doi.org/10.1016/j.jsv.2004.04.020
  13. Larrondo, H., Avalos, D. and Laura, P.A.A. (1992), "Natural frequencies of Bernoulli beam carrying an elastically mounted concentrated mass", Ocean Eng., 19, 461-468 https://doi.org/10.1016/0029-8018(92)90004-N
  14. Manikanahally, D.N. and Crocker, M.J. (1991), "Vibration absorbers for hysteretically damped mass-load beams", J. Vib. Acoust., ASME, 113, 116-122 https://doi.org/10.1115/1.2930145
  15. Meirovitch, L. (1967), Analytical Methods in Vibrations, Macmillan Company, London
  16. Nicholson, J.W. and Bergman, L.A. (1986), "Free vibration of combined dynamical systems", J. Eng. Mech., 112, 1-13 https://doi.org/10.1061/(ASCE)0733-9399(1986)112:1(1)
  17. Rossit, C.A. and Laura, P.A.A. (2001), "Free vibrations of a cantilever beam with a spring-mass system attached to the free end", Ocean Eng., 28, 933-939 https://doi.org/10.1016/S0029-8018(00)00055-X
  18. Wang, J.R., Liu, T.L. and Chen, D.W. (2007), "Free vibration analyses of a Timoshenko beam carrying multiple spring-mass systems with the effects of shear deformation and rotary inertia", Struct. Eng. Mech., 26(1), 1-14 https://doi.org/10.12989/sem.2007.26.1.001
  19. Wu, J.J. and Whittaker, A.R. (1999), "The natural frequencies and mode shapes of a uniform cantilever beam with multiple two-dof spring-mass systems", J. Sound Vib., 227(2), 361-381 https://doi.org/10.1006/jsvi.1999.2324
  20. Wu, J.J. (2002), "Alternative approach for free vibration of beams carrying a number of two degree-of-freedom spring-mass systems", J. Struct. Eng., ASCE, 128(12), 1604-1616 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1604)
  21. Wu, J.J. (2003), "Use of effective stiffness matrix for the free vibration analyses of a non-uniform cantilever beam carrying multiple two degree-of-freedom spring-damper-mass systems", Comput. Struct., 81(24-25), 2319-2330 https://doi.org/10.1016/S0045-7949(03)00315-8
  22. Wu, J.J. (2005), "Use of equivalent spring method for free vibration analyses of a rectangular plate carrying multiple three-degree-of-freedom spring-mass systems", Struct. Eng. Mech., 21(6), 713-735 https://doi.org/10.12989/sem.2005.21.6.713
  23. Wu, J.S. and Chou, H.M. (1998), "Free vibration analysis of a cantilever beam carrying any number of elastically mounted pointed masses with the analytical-and-numerical-combined method", J. Sound Vib., 213, 317-332 https://doi.org/10.1006/jsvi.1997.1501
  24. Wu, J.S., Chen, D.W. and Chou, H.M. (1999), "On the eigenvalues of a uniform cantilever beam carrying any number of spring-damper-mass systems", J. Numer. Meth. Eng., 45, 1277-1295 https://doi.org/10.1002/(SICI)1097-0207(19990730)45:9<1277::AID-NME630>3.0.CO;2-A
  25. Wu, J.S. and Chen, D.W. (2000), "Dynamic analysis of a uniform cantilever beam carrying a number of elastically mounted point masses with dampers", J. Sound Vib., 229(3), 549-578 https://doi.org/10.1006/jsvi.1999.2504
  26. Wu, J.S. and Chen, D.W. (2001), "Free vibration analysis of a timoshenko beam carrying multiple spring-mass systems by using the numerical assembly technique", J. Numer. Meth. Eng., 50, 1039-1058 https://doi.org/10.1002/1097-0207(20010220)50:5<1039::AID-NME60>3.0.CO;2-D