DOI QR코드

DOI QR Code

A laminated composite plate finite element a-priori corrected for locking

  • Filho, Joao Elias Abdalla (Programa de POs-Graduacgo em Engenharia Mecanica, Pontificia Univ Catolica do Parana (PUCPR) Rua Imaculada Conceicao) ;
  • Belo, Ivan Moura (Programa de POs-Graduacao em Engenharia Mecanica, Pontificia Univ Catolica do Parana (PUCPR) Rua Imaculada Conceicao) ;
  • Pereira, Michele Schunemann (Programa de POs-Graduacao em Engenharia Mecanica, Pontificia Univ Catolica do Parana (PUCPR) Rua Imaculada Conceicao)
  • 투고 : 2006.10.10
  • 심사 : 2008.01.08
  • 발행 : 2008.03.30

초록

A four-node plate finite element for the analysis of laminated composites which is developed using strain gradient notation is presented. The element is based on a first-order shear deformation theory and on the equivalent lamina assumption. Strains and stresses can be calculated at different points through the thickness of the plate. They are averaged values due to the equivalent lamina assumption. A shear correction factor is used as the transverse shear strain is taken to be constant over the plate thickness while its actual variation is parabolic. Strain gradient notation, which is physically interpretable, allows for the detailed a-priori analysis of the finite element model. The polynomial expansions are inspected and spurious terms responsible for modeling errors are identified in the shear strains polynomial expansions. The element is corrected by simply removing the spurious terms from the shear strains expansions. The element is implemented into a FORTRAN finite element code in two versions; namely, with and without spurious terms. Results are compared to show the effects of the spurious terms on the solutions. It is also shown that a refined mesh composed of corrected elements provides solutions which approximate very well the analytical solutions, validating the procedure.

키워드

참고문헌

  1. Aagaah, M.R., Mahinfalah, M. and Jazar, G.N. (2003), "Linear static analysis and finite element modeling for laminated composite plates using third order shear deformation theory", Comp. Struct., 62, 27-39 https://doi.org/10.1016/S0263-8223(03)00081-3
  2. Abdalla, $F^{\circ}$ JE Qualitative and Discretization Error Analysis of Laminated Composite Plate Models. Ph.D. Dissertation (1992), University of Colorado, Boulder, CO.
  3. Abdalla, $F^{\circ}$ JE and Dow, J.O. (1994), "An error analysis approach for laminated composite plate finite element models", Comput. Struct., 52(4), 611-616 https://doi.org/10.1016/0045-7949(94)90343-3
  4. Ahamad, S., Irons, B.M. and Zienkiewicz, O.C. (1970), "Analysis of thick and thin shell structures by curved finite elements", Int. J. Numer. Meth. Eng., 2, 419-451 https://doi.org/10.1002/nme.1620020310
  5. Bathe, K.J. and Dvorkin, E. (1985), "A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation", Int. J. Numer. Meth. Eng., 21, 367-383 https://doi.org/10.1002/nme.1620210213
  6. Bose, P. and Reddy, J.N. (1998), "Analysis of composite plates using various plate theories, Part 1: Formulation and analytical solutions", Struct. Eng. Mech., 6(6), 583-612 https://doi.org/10.12989/sem.1998.6.6.583
  7. Bose, P. and Reddy, J.N. (1998), "Analysis of composite plates using various plate theories, Part 2: Finite element model and numerical results", Struct. Eng. Mech., 6(7), 727-746 https://doi.org/10.12989/sem.1998.6.7.727
  8. Botello, S., Onate, E. and Canet, J.M. (1999), "A layer-wise triangle for analysis of laminated composite plates and shells", Comput. Strucut., 70, 635-646 https://doi.org/10.1016/S0045-7949(98)00165-5
  9. Brank, B. and Carrera, E. (2000), "A family of shear-deformable shell finite elements for composite structures", Comput. Strucut., 76, 287-297 https://doi.org/10.1016/S0045-7949(99)00153-4
  10. Dow, J.O. (1999), A Unified Approach to the Finite Element Method and Error Analysis Procedures, Academic Press, San Diego, CA
  11. Dow, J.O. and Abdalla, $F^{\circ}$ JE (1994), "Qualitative errors in laminated composite plate models", Int. J. Numer. Meth. Eng., 37, 1215-1230 https://doi.org/10.1002/nme.1620370707
  12. Dow, J.O. and Byrd, D.E. (1988), "The identification and elimination of artificial stiffening errors in finite elements", Int. J. Numer. Meth. Eng., 26, 743-762 https://doi.org/10.1002/nme.1620260316
  13. Dow, J.O. and Byrd, D.E. (1990), "Error estimation procedure for plate bending elements", AIAA J., 28, 685-693 https://doi.org/10.2514/3.10447
  14. Dow, J.O., Feng, C.C., Su, S.Z. and Bodley, C.S. (1985), "An equivalent continuum representation of structures composed of repeated elements", AIAA J., 23, 1564-1569 https://doi.org/10.2514/3.9124
  15. Dow, J.O., Ho, T.H. and Cabiness, H.D. (1985), "A generalized finite element evaluation procedure", J. Struct. Eng., ASCE, 111(2), 435-452 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:2(435)
  16. Dow, J.O. and Huyer, S.A. (1989), "Continuum models of space station structures", J. Aerospace Eng., ASCE, 2(4), 212-230
  17. Ghugal, Y.M. and Shimpi, R.P. (2002), "A review of refined shear deformation theories of isotropic and anisotropic laminated plates", J. Reinf. Plast. Comp., 21(9), 775-805 https://doi.org/10.1177/073168402128988481
  18. Hughes, T.J.R., Cohen, M. and Haroun, M. (1978), "Reduced and selective integration techniques in finite element analysis of plates", Nuclear Eng. Des., 46, 203-222 https://doi.org/10.1016/0029-5493(78)90184-X
  19. Hughes, T.J.R., Taylor, R.L. and Kanoknukulchai, W. (1977), "A simple and efficient finite element for plate bending", Int. J. Numer. Meth. Eng., 11, 1529-1543 https://doi.org/10.1002/nme.1620111005
  20. Lo, K.H., Cristensen, R.M. and Wu, E.M. (1977), "A high-order theory of plate deformation, Part 1: Homogeneous plates", J. Appl. Mech., 44(4), 663-668 https://doi.org/10.1115/1.3424154
  21. Lo, K.H., Cristensen, R.M. and Wu, E.M. (1977), "A high-order theory of plate deformation, Part 2: Laminated plates", J. Appl. Mech., 44(4), 669-676 https://doi.org/10.1115/1.3424155
  22. Prathap, G. (1997), "A field-consistency approach to plate elements", Struct. Eng. Mech., 5(6), 853-865 https://doi.org/10.12989/sem.1997.5.6.853
  23. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed., CRC Press, Boca Raton, FL
  24. Reddy, J.N. (1989), "On refined computational models of composite laminates", Int. J. Numer. Meth. Eng., 27, 361-382 https://doi.org/10.1002/nme.1620270210
  25. Reddy, J.N. and Averill, R.C. (1991), "Advances in the modelling of laminated plates", Comput. Syst. Eng., 2(5/6), 541-555 https://doi.org/10.1016/0956-0521(91)90056-B
  26. Reddy, J.N. and Wang, C.M. (2000), "An overview of the relationships between solutions of the classical and shear deformation plate theories", Comp. Sci. Tech., 60, 2327-2335 https://doi.org/10.1016/S0266-3538(00)00028-2
  27. Sheikh, A.H. and Chakrabarti, A. (2003), "A new plate bending element based on higher-order shear deformation theory for the analysis of composite plates", Finite Elem. Anal. Design, 39, 883-903 https://doi.org/10.1016/S0168-874X(02)00137-3
  28. Singh, G. and Rao, G.V. (1995), "A discussion on simple third-order theories and elasticity approaches for flexure of laminated plates", Struct. Eng. Mech., 3(2), 121-133 https://doi.org/10.12989/sem.1995.3.2.121
  29. Zienkiewicz, O.C., Taylor, R.L. and Too, J.M. (1971), "Reduced integration technique in general analysis of plates and shells", Int. J. Numer. Meth. Eng., 3, 275-290 https://doi.org/10.1002/nme.1620030211

피인용 문헌

  1. On a Four-Node Quadrilateral Plate for Laminated Composites vol.14, pp.12, 2017, https://doi.org/10.1590/1679-78253663
  2. A serendipity plate element free of modeling deficiencies for the analysis of laminated composites vol.154, 2016, https://doi.org/10.1016/j.compstruct.2016.07.042
  3. Modeling Deficiencies in the Eight-Node Mindlin Plate Finite Element Physically Explained vol.146, pp.2, 2008, https://doi.org/10.1061/(asce)em.1943-7889.0001715