DOI QR코드

DOI QR Code

Earthquake behavior of stiffened RC frame structures with/without subsoil

  • Ozdemir, Y.I. (Department of Civil Engineering, Karadeniz Technical University) ;
  • Ayvaz, Y. (Department of Civil Engineering, Karadeniz Technical University)
  • Received : 2005.06.07
  • Accepted : 2008.01.23
  • Published : 2008.03.30

Abstract

The purpose of this study is to investigate the linear earthquake behavior of the frame structures including subsoil with different stiffening members and to compare the results of each frame considered. These comparisons are made separately for displacement, bending moments and axial forces for frames with different storey and bay numbers for the time history and the modal analyses. The results of both methods are also compared. The results of the frames with subsoil are also compared with the results of the frames without subsoil. It is concluded that all stiffening members considered in this study decrease the lateral displacement of the frame and the bending moment of the columns and increase the axial force in the columns and that configuration of the bracing members come out to be an important parameter in braced frames since the frames with the same type of bracing give different results depending on configuration. It is also concluded that, in general, the absolute maximum displacements of the frames modeled with subsoil are larger than those of the frames modeled without subsoil.

Keywords

References

  1. Ambrose, J. and Vergun, D. (1985), Seismic Design of Buildings, John Wiley and Sons, Inc., New York
  2. Architectural Inst. of Japan, Steel Committee of Kinki Branch (1995), "Reconnaissance report on damage to steel building structures observed from the 1995 Hyogoken-Nanbu (Hanshin/Awaji) earthquake", AIJ, Tokyo, May
  3. Ayvaz, Y., Doangün, A. and Durmu, A. (1997), "Earthquake Behavior of Frame Structures with Different Stiffening Members", Proceedings of the 4th International Conference on Civil Engineering, May
  4. Ayvaz, Y. and Aydemir, Y. (2000), Comparative Analysis of Earthquake Behavior of Frame Structures with Different Stiffening Members, Proceedings of Advances in Civil Engineering, 4th International Congress, Gazimagusa, November
  5. Celep, Z. and Kumbasar, N. (1993), Introduction to Earthquake Engineering and Earthquake Resistant Structural Design (Turkish), Sema Press, Istanbul
  6. Choi, C.K. and Kim, E.-D. (1985), "Multistory frames under sequential gravity loads", J. Struct. Eng., 111, 2373-2384 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:11(2373)
  7. Choi, C.K., Chung, H.K., Lee, D.-G. and Wilson, E.L. (1992), "Simplified building analysis with sequential dead loads - CFM." J. Struct. Eng., 118(4), 944-954 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:4(944)
  8. Cavdar, O. (2005), Comparative Analysis of Linear Behavior of Frame Structures Stiffened with K and Knee Types Bracing Members Subjected to Eartquake, M. Sc. Thesis, Karadeniz Technical University, Turkey, January
  9. Dowrick, D.J. (1987), Earthquake Resistant Design, 2nd Ed., John Wiley and Sons, Inc., New York
  10. Ersoy, U. and Citipitoglu, E. (1988), Basic Principles Used in Design and Construction of Tall Buildings (Turkish), Chamber of Civil Engineers, Izmir
  11. Fan, F. and Ahmadi, G. (1990), "Floor response spectra for base-isolated multi-storey structures", Earthq. Eng. Struct., 19, 377-388 https://doi.org/10.1002/eqe.4290190307
  12. Goncalves, R. (1991), "New stability equation for columns in braced frames", J. Struct. Eng., ASCE, 118(7), 1853-1870 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1853)
  13. Gordon, J.C. (2005), Development of the Full Height Truss Frame, M. Sc. Thesis, Georgia Institute of Technology, August
  14. Jangid, R.S. (1996), "Seismic response of an asymmetric base isolated structure", Comput. Struct., 60(2), 261-267 https://doi.org/10.1016/0045-7949(95)00369-X
  15. Jayachandran, P. (2004), Tall Buildings: Design and Behavior, Proceedings of the 7th International Congress on Computational Structures Technology, Lisbon, Portugal, September
  16. Kalyanaraman, V., Mahadevan, K. and Thairani, V. (1998), "Core loaded earthquake resistant bracing systems", J. Constr. Steel. Res., 46(1), 437-439 https://doi.org/10.1016/S0143-974X(98)80074-6
  17. Kim, H. and Goel, S. (1992), Seismic Evaluation and Upgrading of Braced Frame Structures for Potential Local Failures, UMCEE 92-24, Dept. of Civil Engineering and Environmental Engineering, Univ. of Michigan, Ann Arbor, Oct.
  18. Krawinkler, H., Anderson, J.C. and Bertero, V.V. (1996), "Northridge earthquake of January 17, 1994: Reconnaissance report", -- Steel Buildings, Earthquake Spectra, Suppl. C, January
  19. Newmark, N.M. and Rosenblueth, E. (1971), Fund. Earth. Eng., Prentice-Hall, Inc., Englewood Cliffs, NJ
  20. Osteraas, J. and Krawinkler, H. (1989), "The Mexico earthquake of September 19, 1985 -- behavior of steel buildings", Earthquake Spectra, February
  21. Ozdemir, Y.I. and Ayvaz, Y. (2002), Comparative Study of Frame Structure Including Subsoil with Different Stiffening Members Subjected to Earthquakes, Proceedings of the 4th International Congress on Advanced in Civil Engineering, Istanbul, September
  22. Oztürk, H. (2005), Comparative Analysis of Earthquake Behavior of Frame Structures Stiffened with Diagonally and Eccentrically Located Bracing Members, M. Sc. Thesis, Karadeniz Technical University, Turkey, March
  23. Pubal, Z. (1988), Theory and Calculation of Frame Structures with Stiffening Walls, Elsevier, Amsterdam
  24. Reitherman, R. (2005), The Expression of Seismic Design, Consortium of Universities for Research in Earthquake Engineering, Richmond, CA
  25. Remennikov, A. and Walpore, W. (1998), "A note on compression strength reduction factor for a buckled strut in seismic-resisting braced systems", Eng. Struct., 20(8), 779-782 https://doi.org/10.1016/S0141-0296(97)00106-5
  26. Rosenblueth, E. (Editor) (1980), Design of Earthquake Resistant Structures, Pentech Press Ltd., London
  27. Saatcioglu, M. and Humar, J. (2003), "Dynamic analysis of building for earthquake-resistant design", Can. J. Civil Eng., 30(2), 338-359 https://doi.org/10.1139/l02-108
  28. Taskin, B. and Hasgür, Z. (2006), "Monte carlo analysis of earthquake resistant R-C 3D shear wall-frame structures", Struct. Eng. Mech., 22(3), 371-399 https://doi.org/10.12989/sem.2006.22.3.371
  29. Tremblay, R., Timler, P., Bruneau, M. and Filiatrault, A. (1995), "Performance of steel structures during the 1994 Northridge earthquake", Can. J. Civil Eng., 22(2), 338-360 https://doi.org/10.1139/l95-046
  30. TS500 (2000), Building Code Requirements for Reinforced Concrete, Turkish Standards Institution, Ankara

Cited by

  1. Investigation of nonlinear behaviour of reinforced concrete frames having different stiffening members vol.13, pp.5, 2014, https://doi.org/10.12989/cac.2014.13.5.679