Structural Engineering and Mechanics

  • 제28권2호
  • /
  • Pages.189-206
  • /
  • 2008
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effective lengths of braced frame columns

  • Girgin, Konuralp (Faculty of Civil Engineering, Istanbul Technical University) ;
  • Ozmen, Gunay (Faculty of Civil Engineering, Istanbul Technical University)
  • 투고 : 2006.11.27
  • 심사 : 2007.10.19
  • 발행 : 2008.01.30
⟨ 이전 논문 다음 논문 ⟩

초록

In several design codes and specifications, simplified formulae and charts are given for determining the effective lengths of frame columns. It is shown that these formulae may yield rather erroneous results in certain cases. This is due to the fact that, the code formulae utilise only local stiffness distributions. In this paper, a simplified procedure for determining approximate values for the buckling loads of braced frames is developed. The procedure utilises a fictitious load analysis of frames and yields errors less than 10%, which may be considered suitable for design purposes. The proposed procedure is applied to several numerical examples and it is shown that all the errors are in the acceptable range.

키워드

참고문헌

  1. ACI 318-89 (1989), 'Building code requirements for reinforced concrete with design applications', Portland Cement Association, Skokie, Illinois
  2. AISC (1988), 'Specification for structural steel buildings', American Institute of Steel Construction, Chicago, Illinois
  3. AISC (1999), 'Load and resistance factor design specification for structural steel buildings', American Institute of Steel Construction, Chicago, Illinois
  4. AISC (2005), 'Specification for structural steel buildings', American Institute of Steel Construction, Chicago, Illinois
  5. Aristizabal-Ochoa, J.D. (1997), 'Braced, partially braced and unbraced frames: Classical approach', J. Struct. Eng., ASCE, 123(6), 799-807 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(799)
  6. Bridge, R.Q. and Fraser, D.J. (1987), 'Improved G-factor method for evaluating effective lengths of columns', J. Struct. Eng., ASCE, 113(6), 1341-1356 https://doi.org/10.1061/(ASCE)0733-9445(1987)113:6(1341)
  7. Cheong-Siat-Moy, F. (1999), 'An improved K-factor formula', J. Struct. Eng., ASCE, 125(2), 169-174 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(169)
  8. Cakiroglu, A. (1977), 'Buckling analysis of framed structures', (In Turkish), Matbaa Teknisyenleri Press, Istanbul
  9. DIN 18800 (1990), 'Part 2: 'Analysis of safety against buckling of linear members and frames', Beuth Verlag GmbH, Berlin
  10. Duan, L. and Chen, W.F. (1988), 'Effective length factors for columns in braced frames', J. Struct. Eng., ASCE, 114(10), 2357-2370 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:10(2357)
  11. Duan, L. and Chen, W.F. (1989), 'Effective length factors for columns in unbraced frames', J. Struct. Eng., ASCE, 115(1), 149-165 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:1(149)
  12. Eurocode 3 (1992), Design of Steel Structures, CEN, Brussels, Belgium
  13. Galambos, T.V. (1968), Structural Members and Frames, Prentice-Hall, Inc., New York
  14. Girgin, K. (1996), 'A method of load increments for determining the second-order limit load and collapse safety', (Dissertation thesis in Turkish), Istanbul Technical University, Istanbul
  15. Hellesland, J. and Bjorhovde, R. (1996), 'Restraint demand factors and effective lengths of braced columns', J. Struct. Eng., ASCE, 122(10), 1216-1224 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:10(1216)
  16. Hellesland, J. and Bjorhovde, R. (1997), 'Improved frame stability analysis with effective lengths', J. Struct. Eng., ASCE, 122(11), 1275-1283 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1275)
  17. LeMessurier, W.J. (1977), 'A practical method of second-order analysis, 2: Rigid frames', Eng. J., AISC, 14(2), 49-67
  18. Horne, M.R. and Merchant, W. (1965), The Stability of Frames, Pergamon Press, London
  19. Mahini, M.R. and Seyyedian, H. (2006), 'Effective length factor for columns in braced frames considering axial forces on restraining members', Struct. Eng. Mech., 22(6), 685-700 https://doi.org/10.12989/sem.2006.22.6.685
  20. Muto, K. (1974), Aseismic Design Analysis of Buildings, Maruzen Co. Ltd., Tokyo
  21. Neal, B.G. (1964), Structural Theorems and Their Applications, Pergamon Press, London
  22. Ozmen, G. and Girgin, K. (2005), 'Buckling lengths of unbraced multi-storey frame columns', Struct. Eng. Mech., 19(1), 55-71 https://doi.org/10.12989/sem.2005.19.1.055
  23. White, D.W. and Hajjar, J.F. (1997), 'Buckling models and stability design of steel frames: A unified approach', J. Constr. Steel Res., 42(3), 171-207 https://doi.org/10.1016/S0143-974X(97)00014-X
  24. Wilson, E.L. (2002), 'Three-dimensional static and dynamic analysis of structures', Comput. Struct., Inc., Berkeley, California, USA
  25. Yura, J.A. (1971), 'Effective length of columns in unbraced frames', Eng. J., AISC, 8(2), 37-42