Corrosion Science and Technology

  • 제7권3호
  • /
  • Pages.152-157
  • /
  • 2008
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지

Corrosion Mechanisms of New Wrought Mg-Zn Based Alloys Alloying with Si, Ca and Ag

  • Ben-Hamu, G. (Department of Materials Engineering, Ben-Gurion University of the Negev) ;
  • Eliezer, D. (Department of Materials Engineering, Ben-Gurion University of the Negev) ;
  • Shin, K.S. (Department of Materials Science and Engineering, Magnesium Technology Innovation Center, Seoul National University) ;
  • Wagner, L. (Institute of Materials Science and Engineering, TU Clausthal)
  • 발행 : 2008.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

New wrought magnesium alloys have increasingly been developed in recent years for the automotive industry due to their high potential as structural materials for low density and high strength/weight ratio demands. However, their poor mechanical properties and low corrosion resistance have led to a search for new kinds of magnesium alloys with better strength, ductility, and high corrosion resistance. The main objective of this research is to investigate the corrosion behaviour of new magnesium alloys: Mg-Zn-Ag (ZQ), Mg-Zn-Mn-Si (ZSM) and Mg-Zn-Mn-Si-Ca (ZSMX). These ZQ6X, ZSM6X1, and ZSM651+YCa alloys were prepared using hot extrusion. AC, DC polarization and immersion tests were carried out on the extruded rods. Microstructure was examined using optical and electron microscopy (SEM) and EDS. The addition of silver decreased the corrosion resistance. The additions of silicon and calcium also affected the corrosion behaviour. These results can be explained by the effects of alloying elements on the microstructure of Mg-Zn alloys such as grain size and precipitates caused by the change in precipitation and recrystallisation behaviour.

키워드

참고문헌

  1. C. D. Yim and K. S. Shin, Mater. Trans., 44, 558 (2003) https://doi.org/10.2320/matertrans.44.558
  2. D. H. Kim, S. J. Song, H. Park, and K. S. Shin, Met. Mater., 3, 51 (1997) https://doi.org/10.1007/BF03026106
  3. J. W. Kim, D. H. Kim, C. D. Yim, and K. S. Shin, J. Kor. Inst. Met. Mater., 35, 1446 (1997)
  4. J. J. Kim, D. H. Kim, K. S. Shin, and N. J. Kim, Scripta mater., 1999, 41, 333 https://doi.org/10.1016/S1359-6462(99)00172-4
  5. C. D. Lee, C. S. Kang, and K. S. Shin, Met. Mater., 6, 351 (2000) https://doi.org/10.1007/BF03028082
  6. C. D. Lee, C. S. Kang, and K. S. Shin, Met. Mater., 6, 441 (2000) https://doi.org/10.1007/BF03028133
  7. C. D. Lee, C. S. Kang, and K. S. Shin, Met. Mater.-Int., 7, 296 (2001)
  8. Y. J. Ko, C. D. Yim, J. D. Lim, and K.S. Shin, Mater. Sci. Forum, 419, 851 (2003) https://doi.org/10.4028/www.scientific.net/MSF.419-422.851
  9. C. S. Roberts, Magnesium and Its Alloys, John Wiley & Sons, New York, 1960
  10. L. Sturkey and J. B. Clark, J. Inst. Met., 88, 177 (1959-60)
  11. J. B. Clar, Acta. Metall., 13, 1281 (1965) https://doi.org/10.1016/0001-6160(65)90039-8
  12. A. K. Bhambri and T. Z. Kattamis, Metall. Trans., 2, 1869 (1971)
  13. V. Sustek, S. Spigarelli, and J. Cadek, Scripta mater., 35, 449 (1996) https://doi.org/10.1016/1359-6462(96)00141-8
  14. W. Unsworth and J. F. King, Magnesium Technology, p. 25, The Inst. of Metal, 1987
  15. S. Beer, G. Frommeyer, and E. Schmid, Proceedings of Conference on 'Magnesium alloys and their applications', p. 317, Oberursel (1992)
  16. Y. Guangyin, L. Manping, D. Wenjiang, and A. Inou, Mater. Sci. Eng., A357, 314320 (2003)
  17. M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions, p. 141, Brussels, 1974
  18. Boukamp, Equivalent Circuit Software, Users Manual, p. 6, The Netherlands University of Twente, 1988
  19. H. H. Uhlig, Corrosion and Corrosion Control, John Wiley & Sons, New York, 1963
  20. G. Ben-Hamu, D. Eliezer, A. Kaya, Y. G. Na, and K. S. Shin, Materials Science and Engineering A, 435, 579 (2006) https://doi.org/10.1016/j.msea.2006.07.109
  21. G. Ben-Hamu, D. Eliezer, and K. S. Shin, Materials Science and Engineering A 447, 1, 35 (1007)