Abstract
The positioning accuracies tend to deteriorate as the distance between the rover and the reference station increases in the Real-Time Kinematic (RTK) surveys using Global Positioning System (GPS). To solve this problem, the National Geographic Information Institute (NGII) of Korea has installed Virtual Reference System (VRS), which is one of the network-based RTK systems. In this study, we conducted the accuracy tests of the VRS-RTK surveys. We surveyed 50 control points inside the NGII's GPS Continuously Operating Reference Stations (CORS) network using the VRS-RTK system, and compared the results with the published coordinates to verify the positioning accuracies. We also conducted the general RTK surveys at the same control points. The results showed that the positioning accuracy of the VRS-RTK was comparable to that of the general RTK, because the horizontal positioning accuracy was 3.1 cm while that of general RTK was 2.0 cm. Also the vertical positioning accuracy of VRS-RTK was 6.8 cm.
GPS를 이용한 RTK(Real Time Kinematic) 측량의 경우 기준국으로부터 거리가 멀어짐에 따라 측위오차가 증가하는 문제점이 발생하게 된다. 이러한 문제점을 해결하기 위해 국토지리정보원은 네트워크 RTK의 일종인 VRS(Virtual Reference System) RTK 시스템을 구축하였다. 이 연구에서는 국토지리정보원에서 구축한 VRS RTK 시스템을 이용한 측량 정확도를 평가하였다. VRS 기준망 내부에 위치한 3등 기준점 50개소를 대상으로 VRS RTK 측량을 실시하고 그 결과를 3등 기준점 고시성과와 비교하는 방식으로 측위 정확도를 검증하였다. 또한 VRS RTK 측량과 동시에 단일 기준국을 이용한 일반 RTK 측량을 실시한 뒤 두 RTK 측량 방식의 측위오차를 비교하였다. 그 결과, VRS RTK 측량의 수평방향 평균제곱근오차는 평균 3.1cm, 일반 RTK 측량의 수평방향 평균제곱근오차는 평균 2.0cm로 1cm 정도의 편차만을 나타내는 것을 확인할 수 있었다. VRS RTK 측량의 수직방향 평균제곱근오차는 평균 6.8cm로 수평방향보다 크게 나타났다.