Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

Dyeing Properties of PET/Dyeable PP Double Knit Fabric

PET/가염PP 이종 편성물의 염색 특성

  • Chang, Young-Min (Department of Textile Engineering, Konkuk University) ;
  • Lee, Jin-Ah (Department of Textile Engineering, Konkuk University) ;
  • Park, Jong-Ho (Department of Textile Engineering, Konkuk University) ;
  • Koh, Joon-Seok (Department of Textile Engineering, Konkuk University) ;
  • Jung, Young-Jin (Dept. of Biomaterials Engineering, College of Natural Resource & Life Science, Pusan National University) ;
  • Kim, Sung-Dong (Department of Textile Engineering, Konkuk University)
  • 장영민 (건국대학교 공과대학 섬유공학과) ;
  • 이진아 (건국대학교 공과대학 섬유공학과) ;
  • 박종호 (건국대학교 공과대학 섬유공학과) ;
  • 고준석 (건국대학교 공과대학 섬유공학과) ;
  • 정영진 (부산대학교 생명자원과학대학, 바이오소재) ;
  • 김성동 (건국대학교 공과대학 섬유공학과)
  • Published : 2008.04.27
Download PDF
⟨ Previous Next ⟩

Abstract

New dyeable PP fiber and several products from it has been developed through dispersing polyester copolymer into PP resin by a Korean synthetic fiber manufacturer and its colleagues. The dyeing properties of PET/dyeable PP double knit fabric were examined with three different types of disperse dye in this study. It was found that the disperse dye, exhausted on dyeable PP at early stage of dyeing, migrated to PET at elevated dyeing temperature when two fibers were dyed in the same dye bath. The ratios of dye distribution between two substrates dyed at $120^{\circ}C$ and $130^{\circ}C$ showed no difference. S type disperse dyes showed good build-up properties and acceptable color fastness while high light fastness type exhibited the lowest amounts of exhaustion but excellent color fastness. It might be concluded that the most appropriate dye for PET/dyeable PP double knit fabric was S type, and that some color difference between PET side and dyeable PP side was unvoidable.

Keywords

References

  1. D. J. Carlsson, A. Garton, and D. M. Wiles, The weatherability of polypropylene monofilaments Effects of fiber production conditions, J. Appl. Polym. Sci., 21(11), 2963-2978(1977) https://doi.org/10.1002/app.1977.070211112
  2. H. C. Kim, Y. D. Kong, Manufacturing of Polypropylene, Polymer Science and Technology, 7(1), 59-67(1996) https://doi.org/10.1002/(SICI)1099-1581(199602)7:2<59::AID-PAT1449>3.0.CO;2-K
  3. M. Ahmed, "Polypropylene Fibers-Science and Technology", Elsevier Scientific Pub. Co., New York, U.S.A., pp.462-499, 1982
  4. Shell Oil, U. S. Pat. 3,772,411(1973)
  5. Phillips Petroleum, U. S. Pat. 3,928,269(1973)
  6. Mishibishi Rayon, B. R. Pat. 1,183,369(1970)
  7. G. W. Urbanczyk, G. Michalak, The Influence of Annealing on the Thermal Properties of Poly(ethylene Terephthalate) Fibers I. The Heat Capacity of Annealed PET Fibers, J. Appl. Polym. Sci., 32(3), 3841-3846(1986) https://doi.org/10.1002/app.1986.070320303
  8. H. T. Lokhande, V. S. Thakar, S. R. Shukla, Electrokinetic Properties of Acrylic Acid-and Methacrylic Acid-Grafted Polypropylene during Chemically Initiated Graft Copolymerization, J. Appl. Polym. Sci., 29(10), 2989-2996(1984) https://doi.org/10.1002/app.1984.070291005
  9. R. Kotet, M. Afshari, et al., Polypropylene alloy filaments dyeable with disperse dyes, Color. Technol., 120(1), 26-29(2004) https://doi.org/10.1111/j.1478-4408.2004.tb00202.x
  10. J. I. Ito, K. Mitani, and Y. Mizutani, Annealing of Commercial Block Polypropylene : I. Thermal and Physical Properties, J. Appl. Polym. Sci., 46(7), 1221-1234(1992) https://doi.org/10.1002/app.1992.070460712
  11. T. W. Son, S. K. Lim, et al., Physical modification of polypropylene: preparation of fibres dyeable with disperse dyes, Color. Technol., 115(12), 366-369(1999) https://doi.org/10.1111/j.1478-4408.1999.tb00289.x
  12. Chengbing Yu, Meifang Zhu, et al., Study on Dyeable Polypropylene Fiber and Its Properties, J. Appl. Polym. Sci., 82(13), 3172-3176 (2001) https://doi.org/10.1002/app.2175
  13. M. D. Teli, R. V Adivarekar, et al., Imparting Disperse and Cationic Dyeability to Polypropylene through Melt Blending, Fibers & Polymers, 5(4), 264-269(2004) https://doi.org/10.1007/BF02875523
  14. H. J. Kim, H. A. Lee, Y. Chang, J. H. Park and S. D. Kim, Dyeing Properties of Blanket Fabric of Dyeable Polypropylene, J. Korean Soc. Dyers & Finishers, 19(2), 106-113(2007)

Cited by

  1. High Light-Fastness Acid Dyes Synthesized from Corresponding Anthraquinone Chromophore Utilizing a Sulfonation Reaction. I. Dye Synthesis and Characterization vol.19, pp.9, 2018, https://doi.org/10.1007/s12221-018-7947-z