Inkjet Printing of Polymeric Resistance Humidity Sensor Using UV-Curable Electrolyte Inks

  • Cho, Nam-Bu (Department of Chemistry and Institute of Basic Science, Dankook University) ;
  • Lim, Tai-Ho (Department of Chemistry and Institute of Basic Science, Dankook University) ;
  • Jeon, Young-Min (Department of Chemistry and Institute of Basic Science, Dankook University) ;
  • Gong, Myoung-Seon (Department of Chemistry and Institute of Basic Science, Dankook University)
  • 발행 : 2008.02.29

초록

UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.

키워드

참고문헌

  1. M. Hijikigawa, S. Miyosh, T. Sugihara, and A. Jinda, Sens. Actuat., 4, 307 (1983)
  2. Y. Sakai, Y. Sadaoka, and H. Fukumoto, Sens. Actuat., 13, 243 (1986)
  3. Y. Sakai, Y. Sadaoka, and M. Matsuguchi, Sens. Actuat., B, 35, 85 (1996)
  4. Y. Sakai, Y. Sadaoka, and K. Ikeuchi, Sens. Actuat., 9, 125 (1986)
  5. C. W. Lee, H. S. Park, J. G. Kim, and M. S. Gong, Macromol. Res., 13, 265 (2005)
  6. C. W. Lee, H. W. Rhee, and M. S. Gong, Syn. Met., 106, 177 (1999)
  7. C. W. Lee, J. G. Kim, and M. S. Gong, Macromol. Res., 13, 96 (2005)
  8. C. W. Lee, H. W. Rhee, and M. S. Gong, Sens. Actuat., B, 73, 124 (2001) https://doi.org/10.1016/S0925-4005(00)00639-0
  9. C. W. Lee, S. W. Joo, and M. S. Gong, Sens. Actuat., B, 105, 150 (2005)
  10. C. W. Lee, H. S. Park, and M. S. Gong, Sens. Actuat., B, 109, 256 (2005)
  11. P.-G. Su, Y.-L. Sun, and C.-C. Lin, Sens. Actuat., B, 113, 883 (2006)
  12. P.-G. Su, I. C. Chen, and R.-J. Wu, Anal. Chim. Acta., 449, 103 (2001)
  13. P.-G. Su and W.-Y. Tsai, Sens. Actuat., B, 100, 417 (2004)
  14. D. K Lee, Y. M. Jeon, T. H. Lim, and M. S. Gong, Polymer (Korea), 31, 194 (2007)
  15. D. K Lee, Y. M. Jeon, T. H. Lim, and M. S. Gong, Polymer (Korea), 31, 302 (2007)
  16. http://www.shinyei.com
  17. http://www.sensorbase.com
  18. H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, and W. Wu, et al., Science, 290, 2123 (2000)
  19. H. Sirringhaus, T. Kawase, and R. H. Friend, Mater. Res. Soc. Bull., 26, 539 (2001)
  20. H. Kawase, H. Sirringhaus, R. H. Friend, and T. Shimoda, Adv. Mater., 13, 1601 (2001)
  21. T. R. Hebner, C. C. Wu, D. Marcy, M. H. Lu, and J. C. Sturm, Appl. Phys. Lett., 72, 519 (1998)
  22. Y. Yang, S. C. Chang, J. Bharathan, and J. Liu, J. Mater. Sci. Mater. Electron 11, 89 (2000)
  23. C. Edwards and D. Albertalli, Application of polymer LED materials using piezo ink-jet printing, SID of Technical Papers, 1049 (2001)
  24. S. B. Fuller, E. J. Wilhelm, and J. M. Jacobson, J. Microelectromech. Syst., 11, 54 (2002) https://doi.org/10.1109/84.982857
  25. C. W. Lee, D. H. Nam, Y. S. Han, K. C. Chung, and M. S. Gong, Sens. Actuat., B, 109, 334 (2005)
  26. A. L. Dearden, P. J. Smith, D. Y. Shin, N. Reis, B. Derby, and P. O'Brien1, Macromol. Rapid Commun., 26, 315 (2004)