International Journal of Fluid Machinery and Systems

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Computational Investigation of Turbulent Swirling Flows in Gas Turbine Combustors

  • Benim, A.C. (Department of Mechanical and Process Engineering, Duesseldorf University of Applied Sciences) ;
  • Escudier, M.P. (Department of Engineering, University of Liverpool) ;
  • Stopford, P.J. (ANSYS Europe Ltd.) ;
  • Buchanan, E. (Combustor Development, Siemens Industrial Turbomachinery Ltd.) ;
  • Syed, K.J. (Combustor Development, Siemens Industrial Turbomachinery Ltd.)
  • Received : 2008.01.01
  • Accepted : 2008.07.04
  • Published : 2008.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

Keywords

References

  1. Cramb, D. J. and McMillan, R., 2001, “Tempest Dual Fuel DLE Development and Commercial Operating Experience andUltra Low NOx Gas Operation”, ASME Paper 2001-GT-76.
  2. Escudier, M. and Keller, J. J., 1983, “Vortex Breakdown: A Two Stage Transition”, Aerodynamics of Vortical Type Flows inThree Dimensions”, AGARD CP No. 342, Paper No. 25.
  3. Weber, R., Boysan, F., Swithenbank, J. and Roberts, P. A., 1986, “Computation of Near Field Aerodynamics of SwirlingExpanding Flows’, Proc. 21st Symp. (Int.) Combustion, The Combustion Institute, Pittsburgh, pp. 1435-1443.
  4. Hogg, S. and Leschziner, 1988, “Computation of Highly Swirling Confined Flow with a Reynolds Stress Turbulence Model’,AIAA Journal, Vol. 27, pp. 57-63.
  5. Benim, A. C., 1990, “Finite Element Analysis of Confined Swirling Flows”, International Journal for Numerical Methods in Fluids, Vol. 11, pp. 697-717. https://doi.org/10.1002/fld.1650110602
  6. Spall, R. E. and Gatski, T. B., 1995, “Numerical Calculations of 3D Turbulent Vortex Breakdown”, International Journal forNumerical Methods in Fluids, Vol. 20, pp. 307-318. https://doi.org/10.1002/fld.1650200404
  7. Turrell, M. D., Stopford, P. J., Syed, K. J. and Buchanan, E., 2004, “CFD Simulation of the Flow within and Downstream of aHigh-Swirl Lean Premixed Gas Turbine Combustor”, ASME Paper GT2004-53112.
  8. ANSYS-CFX-10, 2006, “SolverManual”, ANSYS Inc.
  9. Sloan, D. G., Smith, P. J. and Smoot, L. D., 1986, “Modelling of Swirl in Turbulent Flow Systems”, Progress in Energy andCombustion Science, Vol. 12, pp. 163-250. https://doi.org/10.1016/0360-1285(86)90016-X
  10. Launder, B. E., Reece, G. J. and Rodi, W., 1975, “Progress in the Development of a Reynolds-Stress Turbulence Closure”,Journal of Fluid Mechanics, Vol. 68, pp. 537-566. https://doi.org/10.1017/S0022112075001814
  11. Speziale, C. G., Sarkar S. and Gatski, T. B., 1991, “Modelling the Pressure-Strain Correlation of Turbulence”, Journal ofFluid Mechanics, Vol. 227, pp. 245-272. https://doi.org/10.1017/S0022112091000101
  12. Sagaut, P., 2002, Large Eddy Simulation for Incompressible Flows – An Introduction, 2nd Ed., Springer, Berlin.
  13. Smagorinsky, J., 1963, “General Circulation Experiments With the Primitive Equations. I: The Basic Experiment”. MonthlyWeather Review, Vol. 91, pp. 99-164. https://doi.org/10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
  14. Hinze, J. O., 1959, Turbulence, McGraw-Hill, New York.
  15. Travin, A., Shur, M., Strelets, M. and Spalart, P., 1999, “Detached-Eddy Simulations Past a Circular Cylinder”, Flow,Turbulence and Combustion, Vol. 63, pp. 293-313. https://doi.org/10.1023/A:1009901401183
  16. Strelets, M., 2001, “Detached Eddy Simulation of Massively Separated Flows”, AIAA Paper 2001-0879.
  17. Menter, F. R., 1994, “Two Equation Eddy-Viscosity Turbulence Models for Engineering Applications”, AIAA Journal, Vol.32, pp. 1598-1695. https://doi.org/10.2514/3.12149
  18. Magnussen, B. and Hjertager, B., 1976, “On Mathematical Modelling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion”, Proc. 16th Symp. (Int.) Combustion, The Combustion Institute, Pittsburgh, pp. 719-729. https://doi.org/10.1016/S0082-0784(77)80366-4
  19. Westbrook, C. and Dryer, H., 1981, “Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames”, Combustion Science and Technology, Vol. 2, pp. 31-47. https://doi.org/10.1080/00102208108946970
  20. Bradshaw, P. (Ed.), 1978, Turbulence, Springer, Berlin.
  21. Peyret, R (Ed.), 2000, Handbook of Computational Fluid Mechanics, Academic Press, San Diego.
  22. Escudier, M. P. and Keller, J. J., 1985, “Recirculation in Swirling Flow: A Manifestation of Vortex Breakdown”, AIAAJournal, Vol. 23, pp. 111-116. https://doi.org/10.2514/3.8878
  23. Escudier, M. P., Bornstein, J. and Zehnder, N., 1980, “Observations and LDA Measurements of Confined Turbulent Vortex Flow”, Journal of Fluid Mechanics, Vol. 98, pp. 490-463. https://doi.org/10.1017/S0022112080000031

Cited by

  1. Modelling of vortex flow controls at high drainage flow rates vol.168, pp.1, 2015, https://doi.org/10.1680/eacm.14.00006