한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제16권3호
  • /
  • Pages.44-51
  • /
  • 2008
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

고전압 기반의 자동차 압축기용 BLDC 모터의 특성 해석

Characteristic Analysis of BLDC Motor for Vehicle Compressor Based on High Voltage

  • 김병우 (울산대학교 전기전자정보시스템공학부) ;
  • 조현덕 (울산대학교 대학원 전기전자정보시스템공학부) ;
  • 이도희 (울산대학교 대학원 전기전자정보시스템공학부)
  • Kim, Byeong-Woo (Department of Electrical, Electronics & Information System, Ulsan University) ;
  • Cho, Hyun-Dock (Graduate School of Electrical, Electronics & Information Systems, Ulsan University) ;
  • Lee, Do-Hee (Graduate School of Electrical, Electronics & Information Systems, Ulsan University)
  • 발행 : 2008.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The performance design and analysis of an electric motor for vehicles is very complicated due to the variety of parameters. This paper presents the design of the BLDC motor for electric air compressor in high voltage(42V) system and compares with the characteristics of IPM, SPM type BLDC motor. Futher, optimal design for the electric motor has been carried out using Equivalent Magnetic Circuit and FEM Modelling. By analyzing the design results, it is found that design parameters for BLDC motor provided an useful tool for vehicles motor design.

키워드

참고문헌

  1. S. M. Jang, Technology and Application of Linear Motor, Prentice Hall, pp.3-24, 1999
  2. G. W. Lee, Y. J. Cho and C. S. Song, "Development a Brushless Linear DC Motor for High Speed and Precise Position Control," KSPE, Vol.15, No.10, pp.73-81, 1998
  3. Z. Q. Zhu and D. Howe, "Analytical Prediction of the Cogging Torque in Radial-field Permanent Magnet Brushless Motors," IEEE Trans. Mag., Vol.28, No.2, pp.1371-1374, 1992 https://doi.org/10.1109/20.123947
  4. N. Bianchi and S. Bologani, "Design Techniques for Reducing the Cogging Torque in Surface-mounted PM Motors," IEEE Trans. Mag., Vol.38, No.5, pp.1259-1265, 2002
  5. S. M. Hwang, "Reduction of Electromagnetic Torque Ripple in High Speed, High Load Brushless DC Motors used for Automobiles," Transactions of KSAE, Vol.6, No.4, pp.39-46, 2003
  6. J. Hur and I. S. Gyeong, "Analysis of Irreversible Magnet Demagnetization in Line-Start Motors based on Finite Element Method," IEEE Trans. Mag., Vol.39, No.3, pp.1488-1491, 2003 https://doi.org/10.1109/TMAG.2003.810330