Abstract
The purpose of this study is to propose frame analysis method for flat plate slabs having edge beam under lateral loads. Flat plate system is defined as the system only with slab of uniform thickness and column. However, the slab system generally incorporate edge beams at exterior connection in actual design. ACI 318 (2005) allows three methods for conducting flat plate system analysis subjected to lateral loads. There are the finite element method (FEM), the equivalent frame method (EFM), and the effective beam width method (EBWM). Among methods, the EBWM enables us to analyze practically by substituting the actual slab to beam element. In this model, the beam element has a thickness equal to that of the slab, and effective beam width equal to some fraction of the slab transverse width. However, the established EBWM was generally proposed for variables of geometry or stiffness reduction factor and seldom proposed for the effect of edge beams. This study verifies that, in the case of flat plate system having edge beams at exterior connections, the lateral stiffness is considerably larger than without edge beams. Therefore it need to analysis method for considered the effect of edge beams. In this study, an analysis model is proposed for the flat plate system having edge beams under lateral loads by considering the effect of edge beams. To verify the accuracy of proposed model, this study compared results of the proposed EBWM with results of FEM of flat plate systems having edge beams under lateral loads. Also, the proposed approach is compared with experimental results of former research.
본 연구의 목적은 수평하중 하의 테두리보가 있는 플랫플레이트 시스템의 해석 방법을 제안 하는 것이다. 플랫플레이트 시스템은 보 없이 기둥이 직접 지지하는 구조로 정의되지만 일반적으로 설계에서는 테두리보를 설치하여 사용하고 있다. 수평하중 하의 플랫플레이트를 해석 할 수 있는 방법으로는 ACI 318 (2005)에서 유한요소법, 유효보폭법, 등가골조법을 제시하고 있다. 그 중 유효보폭법은 슬래브를 보요소로 치환함으로써 실용적인 해석이 가능하도록 하는 해석 방법이다. 유효보폭법에서의 보 요소는 슬래브와 같은 두께와 실제 슬래브에 대하여 어떠한 비율로 정의되는 유효보폭으로 정의된다. 그러나 유효보폭법에 관한 연구는 기하학적 변수에 대한 연구나 강성 감소 계수에 관한 연구가 일반적이고 테두리보를 고려해 줄 수 있는 유효보폭모델에 관한 연구는 아직 미미한 실정이다. 본 연구에서는 테두리보가 없는 플랫 플레이트 시스템의 횡 강성보다 테두리보가 있는 플랫플레이트 시스템의 횡 강성이 더 큰 강성을 확보하는 것을 검증하였다. 따라서 테두리보의 영향을 고려할 수 있는 플랫플레이트 시스템의 해석 방법이 제시되어야 할 필요가 있다고 판단된다. 본 연구에서는 수평하중에 대한 테두리보가 있는 플랫플레이트의 유효보폭모델을 제안하였다. 제안된 모델의 검증을 위하여 제안된 유효보폭모델의 결과값을 유한요소해석의 결과값과 비교하였다. 또한 제안된 유효보폭모델의 결과값과 기존에 수행된 실험의 결과와 비교하였다.