초록
본 연구에서는 무지주 지하합성벽에서 흙막이용 H-말뚝과 콘크리트 벽체의 전단성능을 구명하고 특히 전단 연결재를 폼타이로 대체하였을 경우의 폼타이 직경에 따른 전단성능 평가와 폼타이의 배치 방법에 따른 전단성능을 평가할 수 있는 방안을 제시하고 있다. 지하합성벽의 전단성능을 평가하고자 폼타이의 직경, 배치 방법, 전단연결재를 폼타이로 대체하였을 경우를 주요변수로 선정하여 6개의 실험체를 제작하였다. 폼타이의 직경에 따라서는 전단성능이 효과적인 것으로 나타났으며, 폼타이 배치에 따라서는 거의 유사한 전단성능을 발휘하였으며, 전단연결재를 폼타이로 대체한 경우에서는 전단성능이 10% 정도 크게 나타나 무지주 지하옹벽에 적용가능한 것으로 판단된다. ACI 349-06과 PCI, ACI 318-05, AISC 360-05에서 제시하고 있는 식으로 계산한 결과와 실험 결과를 비교하였을 경우 전단연결재의 전단 강도를 ASIC 식이 가장 유사하게 나타내고 있음을 볼 수 있다. 또한 콘크리트와 철골부재의 접합면에 생기는 마찰력에 추후 연구를 통한 전단내력을 평가할 경우 지하합성벽의 전단내력을 예측할 수 있을 것으로 판단된다.
In general, conventional sheeting H-pile is often used as a temporary member installed upon construction of outer retaining wall at basement floor. In CBW (composite basement wall), R/C basement wall is combined with H-Pile and resists lateral soil pressure together. This paper presents an experimental results of push out shear test of CBW with stud coupler as shear connectors to combine H-Pile with R/C wall six specimens with different diameter of FT (form tie) and arrangement of shear connectors were tested to evaluate the shear capacity of the composite wall. Test results showed that shear strength increased with diameter of FT. The shear strength of shear connector in CBW could be suitably predicted by using the previous equations codified in the codes. Best correlation, especially, was found when the calculation result by the formula in AISC 360-05 was compared to test one.