DOI QR코드

DOI QR Code

Fire Resistance Performance for Hybrid Fiber Reinforced High Strength Concrete Column Member

하이브리드 섬유보강 고강도콘크리트 기둥부재의 내화성능

  • Won, Jong-Pil (Civil & Environmental System Engineering, Konkuk University) ;
  • Jang, Chang-Il (Civil & Environmental System Engineering, Konkuk University) ;
  • Lee, Sang-Woo (Civil & Environmental System Engineering, Konkuk University) ;
  • Kim, Heung-Youl (Fire & Engineering Services Research Center, Korea Institute of Construction Technology) ;
  • Kim, Wan-Young (Dam Engineering Research Center, Korea Institute of Water and Environment)
  • 원종필 (건국대학교 사회환경시스템공학과) ;
  • 장창일 (건국대학교 사회환경시스템공학과) ;
  • 이상우 (건국대학교 사회환경시스템공학과) ;
  • 김흥열 (한국건설기술연구원 화재및설비연구센터) ;
  • 김완영 (한국수자원공사 수자원연구원)
  • Published : 2008.12.31

Abstract

This study evaluated fire resistance performance for hybrid (polypropylene+steel) fiber reinforced high strength concrete column. Full-size columns were constructed and tested with or without fibers using ISO-834 fire curve. As the result of test, Control specimen occurred serious spalling and indicated rapidly internal temperature increasing. Specimen with polypropylene fiber occurred not spalling but steady internal temperature increasing. Specimen with hybrid fiber occurred not spalling as well as does not propagated temperature distribution. Therefore, hybrid fiber reinforced column specimen indicated a good fire resistance performance than other cases.

본 연구에서는 고강도콘크리트의 내화성능 향상을 위해 사용하고 있는 폴리프로필렌섬유와 강섬유 혼입에 따른 설계 강도 60 MPa급 고강도콘크리트 기둥의 내화특성을 평가하였다. 고강도 기둥 콘크리트 공시체의 내화특성 평가를 위하여 ISO-834 가열 곡선을 적용하여 내화실험을 실시하였다. 실험결과 섬유보강재를 혼입하지 않은 경우 폭렬이 심하게 발생하였으며 내부온도도 높게 나타났다. 폴리프로필렌 섬유를 혼입한 고강도콘크리트 기둥 부재의 경우 폭렬이 발생하지 않았으며 내부온도도 섬유보강재를 혼입하지 않은 경우보다 낮게 나타났으나 내부온도 증가에 있어서는 편차가 심해 내부온도 저하에는 큰 효과가 없는 것으로 나타났다. 폴리프로필렌섬유와 강섬유를 혼입한 기둥 공시체의 경우 폭렬이 발생하지 않았으며 가장 낮은 내부온도를 나타내 우수한 내화성능을 나타냈다.

Keywords

References

  1. 한천구, 양성환, 이병열, 황인성, 전선천, '폴리프로필렌 섬유의 혼입률 및 부재크기 변화에 따른 고성능 콘크리 트의 내화 특성,' 콘크리트학회 논문집, 14권, 4호, 2002, pp. 449-456
  2. 한천구, 황인성, 이재삼, 김경민, '중심 축하중을 받는 고강도 RC기둥의 섬유 혼입량에 따른 폭열 및 내화 성상,' 콘크리트학회 논문집, 18권, 1호, 2006, pp. 83-90 https://doi.org/10.4334/JKCI.2006.18.1.083
  3. 원종필, 박경훈, 김황희, 김정훈, 이수진, 이시원, '시멘트 복합체의 내화성능 향상을 위한 폴리프로필렌 섬유의 형상과 혼입량 결정,' 콘크리트학회 논문집, 18권, 1 호, 2006, pp. 397-400
  4. 이차돈, 이승환, 이창은, '화해를 입은 보통강도 철근콘크리트 정방형 기둥의 실용 잔존내력식,' 콘크리트학회 논문집, 18권, 1호, 2006, pp. 3-12 https://doi.org/10.4334/JKCI.2006.18.1.003
  5. 소양섭, '고성능 콘크리트의 내화성능,' 콘크리트학회지, 14권, 2호, 2002, pp. 37-44
  6. 태순호, 이병곤, '고온에 노출된 콘크리트 미세조직 특성,' 한국화재소방학회, 12권, 4호, 1998, pp. 31-40
  7. Min, L., Chun, X. Q., and Wei, S., 'Mechanical Properties of High-Strength Concrete after Fire,' Cement & Concrete Research, Vol. 34, 2004, pp. 1001-1005 https://doi.org/10.1016/j.cemconres.2003.11.007
  8. Pirre, K., Gregoire, C., and Christophe, G., 'High-Temperature Behaviour of HPC with Polypropylene Fiber from Spalling to Microstructure,' Cement and Concrete Research, Vol. 31, 2001, pp. 1487-1499 https://doi.org/10.1016/S0008-8846(01)00596-8
  9. Xiao, J. and Falkner, H., 'On Residual Strength of High- Performance Concrete with and without Polypropylene Fibres at Elevated Temperatures,' Fire Safety Journal, Vol. 41, No. 2, 2006, pp. 115-121 https://doi.org/10.1016/j.firesaf.2005.11.004

Cited by

  1. Development and Application of CFT without Fire Protection using High Performance Steel and Concrete vol.13, pp.3, 2013, https://doi.org/10.5345/JKIBC.2013.13.3.272
  2. Fire Resistance Performance of High Strength Concrete Columns with Fireproof Gypsum Board vol.22, pp.2, 2010, https://doi.org/10.4334/JKCI.2010.22.2.229
  3. Effect of Fiber Types on Fundamental Properties of Pavement Concrete vol.22, pp.4, 2010, https://doi.org/10.4334/JKCI.2010.22.4.473