International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Adhesion Strength and Other Mechanical Properties of SBR Modified Concrete

  • Published : 2008.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Polymer-cement composites are known repair materials. The aim of this work is to investigate the influence of various amount of dispersion of carboxylated styrene-butadience copolymer on the selected mechanical properties of polymer-cement concrete (PCC) and on its adhesion to ordinary concrete. The compressive, flexural and tensile strengths as well as frost resistance and fracture resistance of the composites are tested. Adhesion strength of PCC to ordinary concrete, as one of most important performance of good repair material is evaluated and analyzed using three test methods. The results obtained in standard pull-off test are compared with the two other tests. The first one, which is an adaptation of WST (wedge splitting test) characterizes crack propagation in the plane of bond created during repair. In the second test the resistance to shear is a measure of adhesion strength.

Keywords

References

  1. Czarnecki, L., "Polymers in Concrete Ppersonal Reflections on the Edge of the New Century," Concrete International, No. 8, 2005, pp .1-7
  2. Czarnecki, L. and ukowski, P., "Influence of Polymer Admixtures and Additives on Durability of Concrete," Cement Wapno Beton, No. 1, 2004, pp. 38-47
  3. Lukowski, P., "Adhesion of Polymer-Cement Concretes to the Substrate," Cement Wapno Beton, No. 3, 2005, pp. 142-147
  4. Czarnecki, L. and ukowski, P., "Concrete-Polymer Composites: Status and Trends," Proceedings of 3rd International Conference on Construction Materials - Performance, Innovations and Structural Implications, Vancouver, Canada, 2005
  5. Knapen, E. and Van Gemert, D., "Influence of Water-Soluble Polymers on the Microstructure of Cement Mortars," Proceedings of 8th International Symposium on Brittle Matrix Composites BMC8, Warsaw, Poland, 2006, pp. 65-72
  6. Joo, M. K., Lee, Y. S. and Chung, I. S., "Dry Shrinkage and Strength Properties of Ultrarapid-Hardening Polymer-Modified Mortar using Redispersible Polymer Powder," Proceedings of 4th Asia Symposium on Polymers in Concrete - ASPIC'2003, Chuncheon, Korea, 2003, pp. 235-241
  7. Schulze, J. and Killermann, O., "Long-Term Performance of Redispersible Powders in Mortars," Cement and Concrete Research, No. 31, 2001, pp. 357-362
  8. Czarnecki, L. and Chmielewska, B., "Factors Affecting Adhesion in Building Joints," Cement Wapno Beton, No.2, 2005, pp. 74-85
  9. Chmielewska, B., "On the Methods of Bond Strength Measurement in Concrete Repair Systems," Adhesion in Interfaces of Building Materials: a Multi-scale Approach, ed. by L.Czarnecki and A.Garbacz in Advances in Materials Science and Restoration, AMSR No. 2, Aedificatio Publishers, Freiburg, 2007, pp. 29-46
  10. Czarnecki, L., Garbacz, A., and Krystosiak, M., "On the Ultrasonic Assessment of Adhesion between Polymer Coating and Concrete Substrate," Cement Concrete Composites, No. 28, 2006, pp. 360-369
  11. Garbacz, A., Piotrowski, T., and Courard, L., RILEM PRO 51 (CD): 2nd International Symposium on Advances in Concrete through Science and Engineering, ed. by J. Marchand, B.Bissonnette, R. Gagne, M. Jolin, F. Paradis, Quebec, Canada, 2006