Clean Technology (청정기술)
- Volume 14 Issue 1
- /
- Pages.1-6
- /
- 2008
- /
- 1598-9712(pISSN)
- /
- 2288-0690(eISSN)
Removal of Paraffin Wax from Ceramic Injection Mold Using Supercritical Carbon Dioxide
세라믹 사출성형체로부터 초임계이산화탄소를 이용한 파라핀왁스의 제거
- Kim, Dong-Hyun (Department of Chemical & Biomolecular Engineering, Sogang University) ;
- Hong, Seung-Tae (Department of Chemical & Biomolecular Engineering, Sogang University) ;
- Yoo, Ki-Pung (Department of Chemical & Biomolecular Engineering, Sogang University) ;
- Lim, Jong-Sung (Department of Chemical & Biomolecular Engineering, Sogang University)
- Published : 2008.03.31
Abstract
Removal of paraffin wax from a ceramic injection mold using supercritical
초임계이산화탄소를 이용하여 세라믹 사출성형체로부터 파라핀왁스를 제거하였다. 파라핀왁스는 세라믹사출성형 공정에서 바인더로 사용되는 물질이다. 파라핀왁스 제거의 최적조건을 찾기 위해 온도, 압력, 이산화탄소의 유량에 대한 영향을 조사하였다. 온도는 328.15 - 348.15 K, 압력은 15 - 30 MPa 범위에서 조절하였으며, 이산화탄소의 유속을 변화시켜가면서 파라핀왁스의 제거율을 측정하였다. 파라핀왁스의 제거율은 압력의 증가에 비례하였다. 온도는 파라핀왁스의 녹는점인 329.15K 이상일 때 파라핀왁스의 제거가 효과적이었고, 더 높은 온도에서는 더 이상의 효과가 없었다. 이산화탄소의 유량 증가에 따라 파라핀 제거율이 향상되었지만 어느 양 이상이 되면 더 이상 효과가 없었다. 파라핀왁스를 보다 더 효과적으로 제거하기 위해 프로판을 공용매로 사용하였다. 초임계이산화탄소에 프로판을 첨가했을 경우 제거율이 향상되었으며, 사출성형체의 구조나 모양에 어떠한 변화도 없이 파라핀왁스를 완전하게 제거할 수 있었다.
Keywords