참고문헌
- 도월희. (2003). 성인남성의 체형 및 모터사이클복 치수체계에 관한 연구. 이화여자대학교 대학원 박사학위 논문
- 산업자원부 기술표준원. (2004). 제 5차 Size Korea 한국인 인체치수조사 사업보고서. 서울: 산업자원부 기술표준원
- 윤승현, 현대은, 김명수. (2004). 3차원 인체치수측정과 형상 변형 기술. 패션정보와 기술, 1, 45-54
- 홍성애, Daanen, H. (2004). TNO의 3D 관련 연구와 의류산업에서의 활용방안. 패션정보와 기술, 1, 72-80
- 황병희. (1999). 패턴개발을 통한 모터사이클슈트의 디자인 연구. 창원대학교 대학원 석사학위 논문
- Ashdown, S. P. & Locker, S. (2004). Improved apparel sizing: Fit and anthropormetric 3D scan data. National Textile Center Annual Report
- Bougourd, J. P., Dekker, L., Ross, P. G., & Ward, J. P. (2000). A comparison of women's sizing by 3D electronic scanning and traditional anthropometry. Journal of Textile Institute, 91 Part 2(2), 163-173 https://doi.org/10.1080/00405000008659536
- Brunsman, M. A., Dannen, H., & Robinette, K. M. (1997). Optimal postures and positioning for human body scanning. Proceedings of International Conference on recent Advance in 3D Digital Imaging and Modeling, 266-273
- Feathers, D. J., Paquet, V. L., & Drury, C. G. (2003). Measurement consistency and three-dimensional electromechanical anthropometry, International Journal of Industrial Ergonomics, 33, 181-190
- Lee, J. R. & Ashdown, S. P. (2005). Upper body surface change analysis using 3-D body scanner. Journal of the Korean Society of Clothing and Textiles, 28(2), 344-353
- Lee, J. Y., Joo, S. Y., & Ashdown, S. P. (2004). A basic study contributes to extract the standardized 3D body data for women aged 60 and older. Journal of the Korean Society of Clothing and Textiles, 28(2), 344-353
- Mckinnon, L. & Istook, C. L. (2002). Body scanning, the effects of subject respiration and foot positioning on the data integrity of scanned measurements. Journal of Fashion Marketing and Management, 6(2), 103-121 https://doi.org/10.1108/13612020210429458
- Park, S. M., Nam, Y. J., & Choi K. M. (2004). A basic study for the standardization of 3D anthropometry. Proceedings of Korean Society of Clothing and Textiles, 57
- Trieb, R., Seidl, A., Hansen, G., & Prutt, C. (2000). 3D Body scanning-systems, methods and applications for automatic interpretation of 3D surface antropometrical data. Proceedings of the IEA 2000/HFES 2000 Con-gress, 843-846
- Yu, C. Y., Lo, Y. H., & Chiou, W. K. (2003). The 3D scanner for measuring body surface area. Applied Ergonomics, 34, 273-278 https://doi.org/10.1016/S0003-6870(03)00007-3
피인용 문헌
- Exploratory Study on Developing a Body Measurement Method Using Motion Capture vol.32, pp.3, 2014, https://doi.org/10.1177/0887302X14526302
- Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric vol.14, pp.2, 2012, https://doi.org/10.5805/KSCI.2012.14.2.277
- Development of Ergonomic Pattern for Motorcycle Pants Using 3D Virtual Clothing vol.25, pp.2, 2016, https://doi.org/10.5934/kjhe.2016.25.2.207
- Development of Compression Wear Tops for Men in Their Forties Based on Muscle Locations vol.39, pp.2, 2015, https://doi.org/10.5850/JKSCT.2015.39.2.271
- A Study on the Design Preference for the Development of Horse-Riding Pants vol.17, pp.1, 2015, https://doi.org/10.5805/SFTI.2015.17.1.1
- Drape Evaluation of 3D Garment Simulations for Flared Skirts vol.16, pp.1, 2014, https://doi.org/10.5805/SFTI.2014.16.1.128
- Domestic Research Trends in IT Fashion vol.14, pp.4, 2012, https://doi.org/10.5805/KSCI.2012.14.4.614
- 2D Pattern Development of Body Surface from 3D Human Scan Data Using Standing and Cycling Postures vol.21, pp.5, 2012, https://doi.org/10.5934/KJHE.2012.21.5.975
- Design of 3D compression upper wear based on skin deformation during arm abduction vol.24, pp.5, 2015, https://doi.org/10.5934/kjhe.2015.24.5.687
- Subjective Wearing Assessment and Clothing Pressure depending on the Pattern Reduction Rate of Developed Cycle Pants Using the 3D Human Scan Data vol.24, pp.2, 2015, https://doi.org/10.5934/kjhe.2015.24.2.255