DOI QR코드

DOI QR Code

Prediction of Springback by Using Constitutive Equations of Mg Alloy Sheets

마그네슘 합금 구성식을 이용한 스프링백 예측

  • 이명규 (한국기계연구원 부설 재료연구소) ;
  • 정관수 (서울대학교 재료공학부) ;
  • 김성준 (한국기계연구원 부설 재료연구소) ;
  • 김헌영 (강원대학교 기계 메카드로닉스 공학부)
  • Published : 2008.04.01

Abstract

Unique constitutive behavior of magnesium alloys as one of hexagonal close packed(hcp) metals has been implemented into the commercial finite element program ABAQUS. The constitutive equations can represent asymmetry in tension-compression yield stresses and flow curves. For the verification purpose, the springback of AZ31B magnesium alloy sheet was measured using the unconstrained cylindrical bending test proposed in Numisheet'2002 benchmark committee. Besides the developed constitutive models, the isotropic models based on tensile and compressive properties were also considered for comparison purpose. The predicted results by the finite element analysis and corresponding experiments showed enhanced prediction capability in springback analysis.

Keywords

References

  1. C. S. Roberts, 1960, Magnesium and its alloys, New York: John Wiley
  2. D. J. Yoon, E. Z. Kim, Y. S. Lee, 2007, Finite Element Study on Deformation Characteristics and Damage Evolution in Warm Backward Extrusion of AZ31 Mg Alloys, Trans. Mater. Proc., Vol. 16, p. 614
  3. B-H. Lee, Y-W. Kim, S-H. Park, C-S. Lee, 2007, Effect of Initial Texture on the Twinning Formation of AZ31 Mg Alloy , Trans. Mater. Proc., Vol. 16, p. 467
  4. J. G. Choi, S. C., Choi, M. G. Lee, H. Y. Kim, 2007, Measurement of Springback of AZ31B Mg Alloy Sheet in OSU Draw/bend Test, Trans. Mater. Proc., Vol. 16, p. 447
  5. K-R. Cho, J-T. Yeom, S-Y. Shim, S-G. Lim, N-K. Park, J-H. Kim, 2007, Characteristics on the Hot Extrusion of Semi-Solid Al-Zn-Mg Alloy, Trans. Mater. Proc., Vol. 16, p. 391
  6. D. J. Yoon, S. J. Lim, E. J., Kim, C. Cho, 2006, Plastic Forming Characteristics of AZ3l Mg Alloy in Warm Backward Extrusion, Trans. Mater. Proc., Vol. 15, p. 597
  7. N-Y. Kim, J-H. Kim, J-T. Yeom, D-G. Lee, S-G. Lim, N-K. Park, J-H. Kim, 2006, Effect of Processing Condition on the Hot Extrusion of Al-Zn-Mg-Sc Alloy, Trans. Mater. Proc., Vol. 15, p. 143
  8. X. Y. Lou, M. Li, R. K. Boger, S. R. Agnew, R. H. Wagoner, 2007, Hardening Evolution of AZ31B Mg Sheet, Int. J. Plast. Vol. 23, p. 44 https://doi.org/10.1016/j.ijplas.2006.03.005
  9. M. G. Lee, R. H. Wagoner, K. Chung, J. K. Lee, H. Y. Kim, 2007, Constitutive Modeling for Anisotropic/ Asymmetric Hardening Behavior of Magnesium alloy sheets, Int. J. Plast., Vol. 24, p. 545 https://doi.org/10.1016/j.ijplas.2007.05.004
  10. Numisheet' 2002 Benchmark Problem, 2002, In: D. Y. Yang, S. I. Oh, H. Huh, Y. H. Kim, (Eds.), Proceedings of 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju, Korea
  11. M. G. Lee, K. Chung, H. Y. Kim, 2007, Constitutive Modeling of AZ31B Magnesium Alloys, Trans. Mater. Proc., Vol. 16, p. 234
  12. M. G. Lee, D. Kim, C. Kim, M. L. Wenner, R. H. Wagoner, K. Chung, 2007, A practical two-surface model and its application to springback prediction, Int. J. Plast., Vol. 23, p. 1189 https://doi.org/10.1016/j.ijplas.2006.10.011
  13. M. G. Lee, S.J. Kim, R. H. Wagoner, K. Chung. H. Y. Kim, 2007, Constitutive Modeling for Anisotropic /Asymmetric Hardening Behavior of Magnesium alloy sheets: Application to sheet springback, Int. J. Plast.,(submitted)