DOI QR코드

DOI QR Code

익형의 형상최적화를 통한 고효율 축류송풍기 설계

High-Efficiency Design of Axial Flow Fan through Shape Optimization of Airfoil

  • 이기상 (인하대학교 대학원 기계공학과) ;
  • 김광용 (인하대학교 기계공학부) ;
  • 최재호 (삼성테크윈 파워시스템연구소)
  • 발행 : 2008.04.01

초록

This study presents a numerical optimization to optimize an axial flow fan blade to increase the efficiency. The radial basis neural network is used as an optimization method with the numerical analysis by Reynolds-averaged Navier-Stokes equations using SST model as turbulence closure. Four design variables related to airfoil maximum camber, maximum camber location, leading edge radius and trailing edge radius, respectively, are selected, and efficiency is considered as objective function which is to be maximized. Thirty designs are evaluated to get the objective function values of each design used to train the neural network. Optimum shape shows the efficiency increased by 1.0%.

키워드

참고문헌

  1. Lofti, O., Teixeira, J. A., Ivey, P. C., Sheard, G. and Kinghorn, I. R., 2005, "Aerodynamic Optimization of Industrial Fan Blades," ASME Turbo Expo 2005, Nevada, USA, GT2005-68385
  2. Kelner, V., Grondin, G., Leonard, O. and Moreau, S., 2005, "Multi-objective Optimization of a Fan Blade by Coupling a Genetic Algorithm and a Parametric Flow Solver," Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, EUROGEN 2005
  3. Chung, K. N., Kim, Y. I., Sung, J. H., Chung, I. H. and Shin, S. H., 2005, "A Study of Optimization of Blade Section Shape for a Steam Turbine," ASME Fluids Engineering Division Summer Meeting and Exhibition, Texas, USA, FEDSM2005-77385
  4. Chen, N., Zhang, H. W., Du, H., Xu, Y. J. and Huang, W. G., 2005, "Effect of Maximum Camber Location on Aerodynamics Performance of a Transonic Compressor Blade," ASME Turbo Expo 2005, Nevada, USA, GT2005-68541
  5. Mengistu, T., Ghaly, W. and Mansour, T., 2007, "Aerodynamic Shape Optimization of a Turbine Blades Using Design-Parameter-Based Shape Representation," ASME Turbo Expo 2007, Montreal, Canada, GT2007-28041
  6. Jang, C. M. and Kim, K. Y., 2003, "Flow Measurements and Performance Analysis Using a 5-Hole Pitot Tube and a Rotating Hot-Wire Probe in an Axial Flow Fan," Transactions of the Korean Society of Mechanical Engineers B, Vol. 27, No 12, pp. 1750-1757 https://doi.org/10.3795/KSME-B.2003.27.12.1750
  7. ANSYS CFX 11.0 Reference Guide, ANSYS Inc., 2006
  8. MATLAB$\circledR$, The language of technical computing, Release 14, The Math Works Inc.
  9. McKay, M. D., Beckman, R. J., and Conover, W. J., 1979, "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code," Technometrics, Vol. 21, pp. 239-245 https://doi.org/10.2307/1268522
  10. Samad, A., Kim, K. Y. and Lee, K. S., 2007, "Multi-objective Optimization of A Turbo- machinery Blade Using NSGA-II" 5th Joint ASME/JSME Fluids Engineering Conference, San Diego, USA, FEDSM2007-37434

피인용 문헌

  1. vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.063
  2. Effects of the Distance between Jet Fans on the Ventilation Performance in a Road Tunnel vol.14, pp.4, 2011, https://doi.org/10.5293/KFMA.2011.14.4.025