Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Ice-on-coil as a Static Ice Making Type

정적제빙형인 관외 제빙에 관한 연구

  • 김명준 (군산대학교 동력기계시스템공학)
  • Published : 2008.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study was experimentally investigated to understand the ice making characteristics of ice on a coil type ice maker. The experiment was carried out under the following conditions which are the brine temperatures of $-10[^{\circ}C],\;-8[^{\circ}C],\;-6[^{\circ}C]$, brine flow velocities of 1.0[m/s], 1.4[m/s], 1.8[m/s] and initial water temperatures of $6[^{\circ}C],\;9[^{\circ}C],\;12[^{\circ}C]$, ect. The acquired conclusions shows: 1) Ice making amount is increased with decreasing in the temperature of brine. 2) Total ice making amount shows higher value in larger size coil. However, the ice making amount per heat transfer area is increased in smaller one. 3) The ice making amount is increased with decreasing in the initial water temperature. 4) It is cleared that the overturn of natural convection existed in this experimental result.

Keywords

References

  1. Inaba, H., Kim, M. J. and Horibe, A., 2002, Heat Transfer Characteristics of Latent Microcapsule-Water Mixed Slurry Flowing in a Pipe with Constant Wall Heat Flux(Numerical Analysis), Transactions of the JSME, Vol. 68, No. 665
  2. Inaba, H., Horibe, A., Tsukamoto, H. and Kim, M. J., 2000, Heat Storage Characteristics of Latent Microcapsules Using Hot Air Bubbles by Direct Contact Heat Exchange, Transactions of the JSME, Vol. 66, No.645
  3. Inaba, H., Kim, M. J., Horibe, A., 2002, Melting Heat Transfer Characteristics of Latent Heat Microcapsule-Water Mixed Slurry Flowing in a Pipe with Constant Wall Heat Flux(Experimental Study), Transact of the JSME, Vol.19 No.1 pp.13-22
  4. Kim, M. J., Park, K. W., 2006, Heat Transfer Characteristics of Micro- encapsulated Phase-change-Material Slurry, Journal of the SAREK, Vol.18, No.6, pp.518-526
  5. Kim, M. J., Lim, J. K., Choe, S. Y., 2004, A Study on Thermo-Physical of Microencapsulated Phase Change Material Slurry, Journal of the KOSME, Vol.28, No.6, pp.962-971
  6. Yu, J. S., Park, J. M., Kim, M. J., Park. K. W., Ice Making Characteristics on Ice-on-coil Type Ice Maker, ISMT 2007 Proceedings, pp.225-230
  7. Kang, C., Peck, J.H., Park, K.W. and Hong, H., 2003, Trends in supply of ice thermal storage system, Proceedings of the SAREK summer annual conference, pp.1-6
  8. Min, J.K., Yoo, A.G., Kim, J.H. and Kim, S., 1993, A study on real time model of transfer process in an ice-on-coil tank, Proceedings of the SAREK winter annual conference, pp.40-46
  9. Lee, S.R, Lee, K.H and Choi, B.Y., 2000, Laboratory test of optimal control algorithm for ice storage system, Proceedings of the SAREK winter annual conference, pp.446-450
  10. Jang, Y.K., Heo, C.K and Kim, S., 2002, An experimental study on the ice making characteristics of an ice-on-coil type ice storage system, Proceedings of the SAREK summer annual conference, pp.84-88
  11. Ahn, Y.H., Kang, B.H., Kim, S. and Lee, D.Y., 2005, The operation characteristics and cost analysis of an ice thermal storage system, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.17, No.2, pp.156-164
  12. Park, K.W., Inaba, H. and Horibe, A., 2001, Study on ice making behavior of water solution with surfactant, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.13, No.12, pp.1175-1183
  13. Seung, H., Peck, J.H., Hong, H. and Kang, C., 2003, Effects of Functional Materials Adding on Adhesion of Ice Slurry, Proceedings of the SAREK winter annual conference, pp.501-506
  14. Myers, T.G. and Hammond, D.W., 1999, Ice and water film growth from incoming supercooled droplets, Heat & Mass Transfer, Vol.42, pp.2233-2242 https://doi.org/10.1016/S0017-9310(98)00237-3

Cited by

  1. 관외착빙형 제빙관의 형태 및 관경 변화에 따른 제빙 특성 vol.16, pp.5, 2008, https://doi.org/10.9726/kspse.2012.16.5.032