International Journal of Control, Automation, and Systems

  • 제6권2호
  • /
  • Pages.243-252
  • /
  • 2008
  • /
  • 1598-6446(pISSN)
  • /
  • 2005-4092(eISSN)
제어로봇시스템학회 (Institute of Control, Robotics and Systems)
권호 표지

Comparison of Impulses Experienced on Human Joints Walking on the Ground to Those Experienced Walking on a Treadmill

  • So, Byung-Rok (Division for Applied Robot Technology, Korea Institute of Industrial Technology) ;
  • Yi, Byung-Ju (School of Electrical Engineering and Computer Science, and the Department of Mechanical Engineering, Hanyang University) ;
  • Han, Seog-Young (School of Electrical Engineering and Computer Science, and the Department of Mechanical Engineering, Hanyang University)
  • 발행 : 2008.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

It has been reported that long-term exercise on a treadmill (running machine) may cause injury to the joints in a human's lower extremities. Previous works related to analysis of human walking motion are, however, mostly based on clinical statistics and experimental methodology. This paper proposes an analytical methodology. Specifically, this work deals with a comparison of normal walking on the ground and walking on a treadmill in regard to the external and internal impulses exerted on the joints of a human's lower extremities. First, a modeling procedure of impulses, impulse geometry, and impulse measure for the human lower extremity model will be briefly introduced and a new impulse measure for analysis of internal impulse is developed. Based on these analytical tools, we analyze the external and internal impulses through a planar 7-linked human lower extremity model. It is shown through simulation that the human walking on a treadmill exhibits greater internal impulses on the knee and ankle joints of the supporting leg when compared to that on the ground. In order to corroborate the effectiveness of the proposed methodology, a force platform was developed to measure the external impulses exerted on the ground for the cases of the normal walking and walking on the treadmill. It is shown that the experimental results correspond well to the simulation results.

키워드

참고문헌

  1. D. K. Richard, B. S. James, D. A. Douglas, D. P. Robert, and W. S. Robert, "Mathematical model of the lower extremity joint reaction forces using Kane's method of dynamics," The Journal of Biomechanics, vol. 31, pp. 185-189, 1998 https://doi.org/10.1016/S0021-9290(97)00128-0
  2. P. B. Alain, B. Antoine, G. Andre, and L. Jeanrene, "A treadmill ergometer for threedimensional ground reaction forces measurement during walking," The Journal of Biomechanics, vol. 34, pp. 105-112, 2001 https://doi.org/10.1016/S0021-9290(00)00125-1
  3. R. Conley, K. Tulchin, G. Harris, P. Smith, J. Humm, and S. Hassani, "Pediatric sports medicine: An evolution of applications of motion analysis," Pediatric Gaits: A New Millennium in Clinical Care and Motion Analysis Technology, pp. 116-223, 2000
  4. R. M. Brach, "Classical planar impact theory and the tip impact of a slender rod," IEEE Journal of Impact Engineering, vol. 13, no. 1, pp. 21-33, 1993 https://doi.org/10.1016/0734-743X(93)90106-H
  5. G. Ferretti, G. Magnani, and A. Zavala Rio, "Impact modeling and control for industrial manipulators," IEEE Control System Magazine, vol. 18, no. 4, pp. 65-71, 1998 https://doi.org/10.1109/37.710879
  6. I. D. Walker, "Impact configurations and measures for kinematically redundant and multiple armed robot systems," IEEE Trans. on Robotics Automation, vol. 12, no. 5, pp. 670-683, 1994
  7. H.-T. Liao, and M. C. Leu, "Analysis of impact in robotic peg-in-hole assembly," Robotica, vol. 16, no. 3, pp. 347-356, 1998 https://doi.org/10.1017/S026357479800040X
  8. Y.-F. Zheng, and H. Henami, "Mathematical modeling of a robot collision with its environment," IEEE Journal of Robotic System, vol. 2, no. 3, pp. 289-307, 1985 https://doi.org/10.1002/rob.4620020307
  9. J. Wittenburg, Dynamics of Systems of Rigid Bodies, Teubner, Stuttgart, 1977
  10. S. H. Lee, B.-J. Yi, S. H. Kim, and Y. K. Kwak, "Modeling and analysis of internal impact for general classes of robotic mechanism," Proc. IEEE/RSJ Int. Conf. Robotics. Systems, pp. 1955-1962, 2000
  11. R. A. Freeman and D. Tesar, "Dynamic modeling of serial and parallel mechanisms/ robotic systems, Part I-Methodology, Part IIApplications," Proc. ASME Int. Conf. Biennial Mechanisms, vol. 15-3, pp. 7-27, 1998
  12. J. H. Kim, W. K. Chung, and Y. G. Youm, "Normalized impact geometry and performance index for redundant manipulators," Proc. IEEE Int. Conf. Robotics. Automation, San Francisco, pp. 1714-1719, 2000
  13. M. W. Whittle, Gait Analysis: An Introduction, 2nd edition, Butterworth-Heinemann, Oxford, 1996
  14. http://www.umich.edu/~mvs330/w00/kneedfulth ings/main.html, Motion Analysis Projects Homepage, Division of Kinesiology, University of Michigan
  15. B. R. So, B.-J. Yi, and W. K. Kim, "Impulse analysis and its applications to dynamic environment," Proc. ASME Int. Conf. Biennial Mechanisms, pp. 109-114, 2002
  16. D. B. Chaffin, G. B. J. Andersson, and B. J. Martin, Occupational Biomechanics, 3rd editon, Wiley-Interscience, 1999
  17. Y. H. Chang, J. E. A. Bertram, and A. Ruina, "A dynamic force and moment analysis system for brachiation," The Journal of Experimental Biology, vol. 200, pp. 3013-3020, 1997
  18. A. Tozeren, Human Body Dynamics: Classical Mechanics and Human Movement, Springer Press, 1999
  19. S. C. Kang, K. Komoriya, K. Yokoi, T. Koutoku, and K. Tanie, "Utilization of inertial effect in damping-based posture control of mobile manipulator," Proc. IEEE Int. Conf. Robotics. Automation, Seoul, Korea, pp. 1277-1282, 2001
  20. K. G. M. Gerritsen, A. J. Bogert, and B. M. Nigg, "Direct dynamics simulation of the impact phase in heel-toe running," The Journal of Biomechanics, vol. 28, pp. 661-668, 1995 https://doi.org/10.1016/0021-9290(94)00127-P
  21. M. Nahon and J. Angles, "Reducing the effects of shocks using redundant actuation," Proc. IEEE Int. Conf. Robotics and Automation, pp. 238-243, 1991