Abstract
Far-infrared vulcanization of ethylene-propylene-diene terpolymer(EPDM) compounds has been studied in comparison with hot air vulcanization. Vulcanization characteristics of EPDM compounds were measured by degree of curing and temperature of specimens in vulcanization process. As a result, degree of curing by far-infrared of EPDM compounds was shown to be higher value than that by hot air at the same vulcanization temperature. Especially, degree of curing by far-infrared on 3 mm thickness of EPDM compounds was increased by two times compared to that by hot air. While the increase of thermal conductivity of EPDM compounds highly improved degree of curing by far-infrared, that hardly improved degree of curing by hot air.
DSC 및 컴파운드 온도 측정을 통해 원적외선에 의한 EPDM의 가교 반응을 연구하였으며, 특히 동일 조건에서의 열풍에 의한 가교 시험을 통해 원적외선 가교시의 효율성을 평가하였다. 원적외선 및 열풍에 의한 EPDM 컴파운드의 가교도를 분석한 결과, 동일 조건에서 원적외선가교 시료의 가교도가 열풍가교에 비해 높게 나타남을 확인할 수 있었으며, 특히 3 mm 두께 시편의 경우 약 2배가량 높은 가교도를 나타내었다. EPDM 컴파운드의 열전도도의 증가는 원적외선에 의한 가교도를 크게 증가시켰으나, 열풍에 의한 가교도의 변화에는 거의 영향을 주지 못하였다.