초록
본 논문에서는 전철 구동용 견인 전동기의 구동을 위한 과변조 영역에서의 NPC형 3-레벨 인버터의 출력전압 선형화 기법을 제안한다. 과변조 영역은 Modulation Index: MI에 따라서 2가지 모드로 나누었으며 과변조영역 I에서는 퓨리에 시리즈를 통한 기본파성분의 크기로 유도된 reference angle을 사용하였다. 과변조영역 II에서는 과변조영역 I과 같은 방법으로 holding angle을 구하여 사용하였다. 이 두 가지 과변조기법을 통하여 PWM 인버터 출력전압을 1펄스 모드까지 선형적으로 획득할 수 있다.
This paper proposes a linearization technique for the 3-level NPC type inverter, which increases the linear control range of Inverter up to the one-pulse inverter. The overmodulation range is divided into two modes depending on the Modulation Index, MI. In overmodulation region I, the reference angles are derived from the fourier series expansion of the reference voltage corresponding to the MI. In overmodulation region II, the holding angles are also derived in the same way. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.