DOI QR코드

DOI QR Code

수성 알루미나/탄화규소 슬러리의 동결주조와 층상복합체의 제조: (I) 슬러리의 분산과 유동성

Freeze Casting of Aqueous Alumina/Silicon Carbide Slurries and Fabrication of Layered Composites: (I) Dispersion and Rheology of Slurries

  • 양태영 (부산대학교 재료공학부) ;
  • 조용기 (부산대학교 재료공학부) ;
  • 김영우 (포항산업과학연구원 기능성재료연구팀) ;
  • 윤석영 (부산대학교 재료공학부) ;
  • 박홍채 (부산대학교 재료공학부)
  • Yang, Tae-Young (School of Materials Science and Engineering, Pusan National University) ;
  • Cho, Yong-Ki (School of Materials Science and Engineering, Pusan National University) ;
  • Kim, Young-Woo (Functional Materials Research Team, Research Institute of Industrial Science and Technology) ;
  • Yoon, Seog-Young (School of Materials Science and Engineering, Pusan National University) ;
  • Park, Hong-Chae (School of Materials Science and Engineering, Pusan National University)
  • 발행 : 2008.02.29

초록

Zeta potential, sedimentation bulk density and rheology in the dispersion system have been studied in terms of solid loading (40-55 vol%), and types of additives. Ammonium polymethacrylate, glycerol, ethoxylated acetylenic diol, and polyvinyl alcohol have been used as the dispersant, cryo-protectant, surfactant, and binder, respectively. Sedimentation density greatly increased upon adding dispersant; the effect was more pronounced with ionic alumina suspension compared with covalent silicon carbide. With further addition of cryo-protectant and surfactant to dispersant, the sedimentation density increased somewhat. The suspension viscosity generally behaviored in an opposite manner to the sedimentation density, i.e., high sedimentation gave low high-shear viscosity, indicative of low order structure formation in the suspended particles. Shear rate rheology in shear rate of $2-300\;sec^{-1}$ showed a shear thinning and its onset began at similar shear rate (${\sim}100\;sce^{-1}$), regardless of solid loading.

키워드

참고문헌

  1. J. S. Reed, Introduction to the Principles of Ceramic processing; pp. 477-91, Wiley, New York, 1994
  2. B. C. Mutsuddy and R. G. Ford, Ceramic Injection Molding; pp. 1-26, Chapman and Hall, London, 1995
  3. J. A. Mangel, "Low-Pressure Injection Molding," Am. Ceram. Soc. Bull., 73 [5] 37-41 (1994)
  4. A. J. Fanelli, R. D. Silvers, W. S. Frei, J. V. Burlew, and G. B. Marsh, "New Aqueous Injection-Molding Process for Ceramic Powders," J. Am. Ceram. Soc., 72 [10] 1833-36 (1989) https://doi.org/10.1111/j.1151-2916.1989.tb05987.x
  5. A. C. Young, O. O. Omatete, M. A. Janney, and P. A. Menchhofer, "Gelcasting of Alumina," J. Am. Ceram. Soc., 74 [3] 612-18 (1991) https://doi.org/10.1111/j.1151-2916.1991.tb04068.x
  6. S. D. Nunn and G. H. Kirby, "Green Machining of Gelcast Ceramic Materials," Ceram. Eng. Sci. Proc., 17 [3] 209-13 (1996) https://doi.org/10.1002/9780470314821.ch24
  7. M. A. janney, O. O. Omatete, C. A. Walls, S. D. Nunn, R. J. Ogel, and G. Westloreland, "Development of Low-Toxicity Gelcasting Systems," J. Am. Ceram. Soc., 81 [3] 581-91 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02377.x
  8. O. O. Omatete, R. A. Strehlow, and C. A. Walls, "Drying of Gelcast Ceramics"; pp. 101-107 in Ceramic Transactions, Vol. 26, Forming Science and Technology for Ceramics. Edited by M. A. Cima. American Ceramic Society, Westerville, OH, 1991
  9. T. J. Graule, L. J. Gauckler, and F. H. Badder, "Direct Coagulation Casting-A New Green Shaping Technique, Part I: Processing Principles," Ind. Ceram., 16 [1] 31-5 (1996)
  10. F. Dogan and H. Hausner, "The Role of Freeze-Drying in Ceramic Powder Processing"; pp. 127-34 in Ceramic Transactions, Vol. 1, Ceramic Powder Science. Edited by G. L. Messing, E. R. Fuller and H. Hausner. American Ceramic Society, Westerville, OH, 1988
  11. C. A. Sundback, B. E. Novich, and R. W. Adams, "Quickset Injection Molding of High-Performance Ceramics"; pp. 157-64 in Ceramic Transactions, Vol. 26, Forming Science and Technology for Ceramics. Ed. by M. J. Cima, American Ceramic Society, Westerville, OH, 1991
  12. R. S. Russell-Floyd, B. Harris, R. G. Cooke, J. Laurie, F. W. Hammett, R. W. Jones, T. Wang, and C. M. Bagnall, "Colloidal Suspensions for the Preparation of Ceramics by a Freeze Casting Routes," J. Non-Cryst. Solids, 147 320-25 (1992) https://doi.org/10.1016/S0022-3093(05)80637-4
  13. U. Paik, V. A. Hackley, and H. W. Lee, "Dispersant-Binder Interactions in Aqueous Silicon Nitride Suspensions," J. Am. Ceram. Soc., 82 [4] 833-40 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb01843.x
  14. U. Paik, "Compatitive Adsorption of Dispersant and Binder on Alumina and Its Effects on the Electrokinetic Behavior in Aqueous Media," Kor. J. Ceram., 4 [4] 292-96 (1998)
  15. M. Persson, A. Forsgren, E. Carlstrom, L. Kall, B. Kronberg, R. Pompe, and R. Calsson, "Steric Stabilization of Silicon Carbide Slips"; p. 623 in High Tech Ceramics. Edited by P. Vincenzini, Elsevier Science, Amsterdam, 1987
  16. S. W. Sofie and F. Dogan, "Freeze Casting of Aqueous Alumina Slurries with Glycerol.," J. Am. Ceram. Soc., 84 [7] 1459-64 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb00860.x