Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis on Current Limiting characteristics of an SFCL using Magnetic Coupling between Two Coils through Computer Simulation

시뮬레이션을 통한 자기결합을 이용한 초전도 한류기의 전류제한 특성 분석

  • Published : 2008.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the fault current limiting characteristics for the superconducting fault current limiter(SFCL) using magnetic coupling between two coils were investigated. The SFCL consists of a high-$T_c$ superconducting(HTSC) element and two coils. This SFCL has different characteristics that depend on the connection form, the winding direction and the inductance ratio of two coils. The impedance and the operational current of the SFCL can be adjusted higher or lower than the resistance and the critical current of HTSC element. Therefore, the SFCL can change the amplitude of the limited fault current. To confirm it, the HTSC element was modeled and the fault current limiting characteristics of the SFCL were analysed through computer simulation. It was obtained from the analysis that the connection form and the winding direction of two coils of the SFCL were the important design parameters.

Keywords

References

  1. E. Thuries, V. D. Pham, Y. Laumond. T. Verhaege, A. Fevrier, M. Collet, and M. Vekhaled, "Toward the superconducting fault current limiter", IEEE Transactions On Power Delivery, vol. 6, no. 2, pp. 801-808, April 1991 https://doi.org/10.1109/61.131138
  2. W. Paul and M. Chen, "Superconducting control for surge currents", IEEE Spectrum, vol. 35, pp. 49-54, May 1998
  3. S. H. Lim, Y. S Cho, H S. Choi, and B. S. Han, "Improvement of Current Limiting Capability of HTSC Elements in Hybrid Type SFCL", IEEE Transactions On Applied Superconductivity, vol. 17, no. 2, pp. 1807-1810, June 2007 https://doi.org/10.1109/TASC.2007.899246
  4. O. B. Hyun, S. D. Cha, H. R. Kim, H. S. Choi, and S. D. Hwang, "Shunt-Assisted Resistive SFCL Components", IEEE Transactions On Applied Superconductivity, vol. 13, no. 2, pp. 2060-2063, June 2003 https://doi.org/10.1109/TASC.2003.812986
  5. S. H. Lim, H. S. Choi, and B. S. Han, "Fault Current Limiting Characteristics due to Winding Direction between Coil 1 and Coil 2 in a flux-lock type SFCL", Physica C, vol. 416, pp. 34-42, November 2004 https://doi.org/10.1016/j.physc.2004.08.019
  6. S. H. Lim, H. S. Choi, S. C. Ko, H. G. Kand and B. S. Han, "Fault current limiting characteristics of new Resistive type Superconducting Fault Current Limiter using Flux linkage", Phys. Stat. Sol.(c), vol. 2, no. 5, pp. 1755-1760, March 2005 https://doi.org/10.1002/pssc.200460825
  7. S. H. Lim, "Operational Characteristics of flux-lock type SFCL with series connection of two coils", IEEE Transactions On Applied Superconductivity, vol. 17, no. 2, pp. 1895-1898, June 2007 https://doi.org/10.1109/TASC.2007.899869
  8. H. R. Kim, H. S. Choi, H. R. Lim, I. S. Kim, O. B. Hyne, "Analysis on quench recovery of Au/YBCO thin film meader lines", 2001년도 한국초전도.저온공학회 학술대회 논문집, pp. 92-94