References
- Oiwa, T. and Katsuki, M., "Survey of Questionnaire on Ultra-precision Positioning," J. of JSPE, Vol. 69, No. 8, pp. 1077-1082, 2003
- Gao, W., "Precision Nanometrology and its Applications to Precision Nanosystems," International Journal of Precision Engineering and Manufacturing Vol. 6, No.4, pp. 14-20, 2005
- Park, C. H., Oh, Y. J., Hwang, J. H. and Lee, D. W., "Development of an Ultra Precision Hydrostatic Guideway Driven by a Coreless Linear Motor," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 2, pp. 55-60, 2005
- Levine, W. S., "The Control Handbook," CRC Press, pp. 1369-1382, 1996
- Otsuka, J. and Masuda, T., "The Influence of Nonlinear Spring Behavior of Rolling Elements on Ultraprecision Positioning Control Systems," Nanotechnology, Vol. 9, No. 2, pp. 85-92, 1998 https://doi.org/10.1088/0957-4484/9/2/008
- Futami, S., Furutani, A. and Yoshida, S., "Nanometer Positioning and Its Micro-dynamics," Nanotechnology, Vol. 1, No. 1, pp. 31-37, 1990 https://doi.org/10.1088/0957-4484/1/1/006
- Okazaki, Y. and Kakuta, K., "Micro-dynamics of Slide Guideway Category," In: Proc. of 9th IPES, Vol. 2, pp. 421-424, 1997
- Tanaka1, T., Ikeda, K., Otsuka, J., Masuda, I. and Oiwa, T., "Influence of Rolling Friction in Linear Ball Guideways on Positioning Accuracy," International Journal of Precision Engineering and Manufacturing Vol. 8, No. 2, pp. 85-90, 2007
- Shimokohbe, A., Tachikawa, H., Sato, K. and Shinshi, T., "Dynamics and Control of Precision Positioning Systems Using Lead Screws," In Proc. of ICAMT, pp. 581-585, 1999
- Rao, G. S. and Ro, P. I., "Submicrometer Control of a Traction Drive Using State Feedback and Estimation," Prec. Eng., Vol. 17, No. 2, pp. 124-130, 1995 https://doi.org/10.1016/0141-6359(94)00013-P
- Fukada, S., "A Study on Microscopic Behavior of Preloaded Ball Screw for Ultra-precise Positioning," In: Proc. of the 1st Korea-Japan Conference on Positioning Technology, pp. 46-51, 2002
- Fukada, S., Naruse, S. and Matsumoto, T., "Studies on Microscopic Behavior of Ball Screw (1st Report)-Fundamental Experiments on Quasi-Static Characteristics," J. of JSPE, Vol. 66, No. 7, pp. 1070-1075, 2000
- Sato, K., "Trend of Precision Positioning Technology," In: Proc. of the COBEM2005, CD-ROM:COBEM2005-0542.pdf, 2005
- Chang, S. B., Wu, S. H. and Hu, Y. C., "Submicrometer Overshoot Control of Rapid and Precise Positioning," Prec. Eng., Vol. 20, No. 3, pp. 161-170, 1997 https://doi.org/10.1016/S0141-6359(97)00010-X
- Sato, K., Zheng, J., Tanaka, T. and Shimokohbe, A., "Micro/Macro Dynamic Characteristics of Mechanism with a Harmonic Speed Reducer and Precision Rotational Positioning Control Using Disturbance Observer," JSME Int. J. Series C, Vol. 43, No. 2, pp. 318-325, 2000 https://doi.org/10.1299/jsmec.43.318
- Altintas, Y., Erkorkmaz, K. and Zhu, W.-H., "Sliding Mode Controller Design for High Speed Feed Drives," Annals of CIRP, Vol. 49, No. 1, pp. 265-270, 2000 https://doi.org/10.1016/S0007-8506(07)62943-6
- Wahyudi, A., Sato, K. and Shimokohbe, A., "Characteristics of Practical Control for Point-to-Point (PTP) Positioning Systems Effect of Design Parameters and Actuator Saturation on Positioning Performance," Prec. Eng., Vol. 27, No. 2, pp. 157-169, 2003 https://doi.org/10.1016/S0141-6359(02)00226-X
- Sato, K., Nakamoto, K. and Shimokohbe, A., "Practical Control of Precision Positioning Mechanism with Friction," Prec. Eng., Vol. 28, No. 4, pp. 426-434, 2004 https://doi.org/10.1016/j.precisioneng.2004.01.003
- Nakagawa, S., Yamaguchi, T., Numasato, H., Hosokawa, H. and Hirai, H., "Improving the Disturbance Resistance of Magnetic Disk Drives by Using Anti-Windup and Model Following Controls with Initial Value Compensation," JSME Int. J. Series C, Vol. 43, No. 3, pp. 618-624, 2000 https://doi.org/10.1299/jsmec.43.618
- Sato, K., "Robust and Practical Control for PTP Positioning," In Proc. ICPT, pp. 394-395, 2004
- Sato, K. and Maeda, G. J., "Simple and Practical Control Method for Ultra-Precision Positioning-Application to a Ballscrew Mechanism," In Proc. of ASPE Annual Meeting, pp. 179-182, 2007
- Sato, K. and Maeda, G. J., "Vibration Problem of Ball Screw Mechanism in Ultra-Precision Positioning and Its Practical Solution,"In Proc. of JSPE Autumn Meeting, pp. 137-138, 2007