참고문헌
- Tokita, Y. and Morimura, M., "Handbook for Precise Isolation of Vibration," FUJI Techno System, p. 98, 1987
- Steinberg, D. S., "Practical Manual for Countermeasure of Vibration for Electrical Equipments," Japan Technical Economy Center, p.1983
- Leissa, A. W., "The Free Vibration of Rectangular Plates," J. Sound Vibration, Vol. 31, No. 3, pp. 257-293, 1973 https://doi.org/10.1016/S0022-460X(73)80371-2
- Sekiya, S., Hamada, M. and Kaku, S. "Handbook for Design of Plates' Stiffness," Asakura Publishing, p. 141, 1982
- Chen, T. Y., "Structural Modification with Frequency Response Constraints for Undamped MDOF Systems," Computers and Structures, Vol. 36, Issue 6, pp. 1013-1018, 1990 https://doi.org/10.1016/0045-7949(90)90208-J
- Wang, X., Zhou, J. and Hu, Y., "A Physics-Based Parameterization Method for Shape Optimization," Computer Methods in Applied Mechanics and Engineering, Vol. 175, Issue 1-2, pp. 41-51, 1999 https://doi.org/10.1016/S0045-7825(98)00318-1
- Sestieri, A. and D'Ambrogio, W., "A Modification Method for Vibration Control of Structures," Mechanical Systems and Signal Processing, Vol. 3, Issue 3, pp. 229-253, 1989 https://doi.org/10.1016/0888-3270(89)90051-4
- Park, Y. H. and Park, Y. S., "StructureOptimization to Enhance its Natural Frequencies Based on Measured Frequency Response Functions," J. Sound Vibration, Vol. 229, Issue 5, pp.1235-1255, 2000 https://doi.org/10.1006/jsvi.1999.2591
- Lee, J. S., "Automated Structural Design System Using Fuzzy Theory and Neural Network," International Journal of Precision Engineering and Manufacturing, Vol. 3, No. 1, pp. 43-48, 2002
- Chae, J. S., Park, T. W. and Kim, J., "Dynamic Analysis of a Flexible Multibody System," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 4, pp. 21-25, 2005
- Chung, I., "Evaluation of Effective Stiffness for 3D Beam with Repeated Structure," International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 2, pp. 25-29, 2006
- Done, G. T. S. and Rangacharyulu, M. A. V., "Use of Optimization in Helicopter Vibration Control by Structural Modification," Journal of Sound and Vibration, Vol. 74, Issue 4, pp. 507-518, 1981 https://doi.org/10.1016/0022-460X(81)90415-6
- Holmes, J., "Mode Shape Corrections for Dynamic Response to Wind," Engineering Structures, Vol. 9, No. 3, pp. 210-212. 1987 https://doi.org/10.1016/0141-0296(87)90017-4
- Alejandro, J. R. and Marc, P. M., "Maximum Amplification of Blade Response due to Mistuning: Localization and Mode Shape Aspects of the Worst Disks," Journal of Turbomachinery, Vol. 125, Issue 3, pp. 442-454, 2003 https://doi.org/10.1115/1.1506958
- Hamochi, M., "Base Plate for Isolation of Vibration," JEOL Ltd., JP 3581257, 2004