Experimental Observations of Boiling and Flow Evolution in a Coiled Tube

  • Ye, P. (Laboratory of Phase-change and Interfacial Transport Phenomena, Department of Thermal Engineering) ;
  • Peng, X.F. (Laboratory of Phase-change and Interfacial Transport Phenomena, Department of Thermal Engineering) ;
  • Wu, H.L. (Laboratory of Phase-change and Interfacial Transport Phenomena, Department of Thermal Engineering) ;
  • Meng, M. (Laboratory of Phase-change and Interfacial Transport Phenomena, Department of Thermal Engineering) ;
  • Gong, Y. Eric (Advanced Heat Transfer LLC)
  • 발행 : 2008.03.31

초록

A sequence of visually experimental observations was conducted to investigate the flow boiling and two-phase flow in a coiled tube. Different boiling modes and bubble dynamical evolutions were identified for better recognizing the phenomena and understanding the two-phase flow evolution and heat transfer mechanisms. The dissolved gases and remained vapor would serve as foreign nucleation sites, and together with the effect of buoyancy, centrifugal force and liquid flow, these also induce very different flow boiling nucleation, boiling modes, bubble dynamical behavior, and further the boiling heat transfer performance. Bubbly flow, plug flow, slug flow, stratified/wavy flow and annular flow were observed during the boiling process in the coiled tube. Particularly the effects of flow reconstructing and thermal non-equilibrium release in the bends were noted and discussed with the physical understanding. Coupled with the effects of the buoyancy, centrifugal force and inertia or momentum ratio of the two fluids, the flow reconstructing and thermal non-equilibrium release effects have critical importance for flow pattern in the bends and flow evolution in next straight sections.

키워드

참고문헌

  1. J.G. Collier, J.R. Thome, 1994, Convective Boiling and Condensation, 3rd Edition, Oxford University Press, Oxford
  2. N. Kattan, J.R. Thome and D. Favrat, Flow boiling in horizontal tubes: part 1-development of a diabatic two-phase flow pattern map, Journal of Heat Transfer 120 (1998) 140-147 https://doi.org/10.1115/1.2830037
  3. L. Wojtan, Investigation of flow boiling in horizontal tubes Part I-A new diabatic two-phase flow pattern map, International Journal of Heat and Mass Transfer 48 (2005) 2955-2969 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.012
  4. L.X. Cheng, New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporat ing inside horizontal tubes, International Journal of Heat and Mass Transfer 49 (2006) 4082-4094 https://doi.org/10.1016/j.ijheatmasstransfer.2006.04.003
  5. S.G. Kandlikar and R.K. Shah, Multipass Plate Heat Exchangers-Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements, Journal of Heat Transfer 111 (1989) 300-313 https://doi.org/10.1115/1.3250678
  6. P.A. Kew, Correlations for the prediction of boiling heat transfer in small-diameter channels, Applied Thermal Engineering 17 (1997) 705-715 https://doi.org/10.1016/S1359-4311(96)00071-3
  7. K.E. Gungor, Simplified general correlation for saturated flow boiling and comparsions of correlations with data, Chemical Engineering Research and Design 65 (1987) 148-156
  8. N. Kattan, J.R. Thome and D. Favrat, Flow Boiling in Horizontal Tubes: Part 2-New Heat Transfer Data for Five Refrigerants, Journal of Heat Transfer 120 (1998) 148-155 https://doi.org/10.1115/1.2830038
  9. J.Y. Shin, Experimental study on forced convective boiling heat transfer of pure refrigerants and refrigerant mixtures in a horizontal tube, International Journal of Refrigeration 20 (1997) 267-275 https://doi.org/10.1016/S0140-7007(97)00004-2
  10. B. Ouazia, Forced convective heat transfer of R-22 evaporating in upward and downward flow in Ubend, International Journal of Refrigeration 17 (1994) 250-256 https://doi.org/10.1016/0140-7007(94)90041-8
  11. W. Owhaib, Evaporative heat transfer in vertical circular microchannels, Applied Thermal Engineering 24 (2004) 1241-1253 https://doi.org/10.1016/j.applthermaleng.2003.12.030
  12. H. Zang, Flow boiling CHF in microgravity, International Journal of Heat and Mass Transfer 48 (2005) 3107-3118 https://doi.org/10.1016/j.ijheatmasstransfer.2005.02.015
  13. M.Y. Wen, Boiling heat transfer of refrigerant R- 600a/R-290-oil mixtures in the serpentine smalldiameter U-tubes, Applied Thermal Engineering 27 (2007) 2353-2362 https://doi.org/10.1016/j.applthermaleng.2007.03.017
  14. T.H. Lee, Local flow characteristics of subcooled boiling flow of water in a vertical concentric annulus, International Journal of Multiphase Flow 28 (2002) 1351-1368 https://doi.org/10.1016/S0301-9322(02)00026-5
  15. S.M. Luo, Theoretical model for drop and bubble breakup in turbulent dispersions, AIChE Journal 4 (1996) 1225-1233
  16. T. Hibiki, Development of one-group interfacial area transport equation in bubbly flow systems, International Journal of Heat and Mass Transfer 45 (2002) 2351-2372 https://doi.org/10.1016/S0017-9310(01)00327-1
  17. T. Richard, The analysis of two-phase flow and heat transfer using a multidimensional, four field, two-fluid model, Nuclear Engineering and design 204 (2001) 29-44 https://doi.org/10.1016/S0029-5493(00)00337-X