DOI QR코드

DOI QR Code

황산제일철과 암모니아수를 이용한 산화철 합성

Synthesis of Iron Oxide Using Ferrous Sulfate and Ammonia Water

  • Kim, Sam-Joong (Department of Materials Science and Engineering, Chungnam National University) ;
  • Eom, Tae-Hyoung (Department of Materials Science and Engineering, Chungnam National University) ;
  • Wang, Wei (Department of Materials Science and Engineering, Chungnam National University) ;
  • Suhr, Dong-Soo (Department of Materials Science and Engineering, Chungnam National University)
  • 발행 : 2008.04.30

초록

A $Fe(OH)_2$ suspension was prepared by mixing iron sulfate and a weak alkali ammonia solution. Following this, iron oxides were synthesized by passing pure oxygen through the suspension (oxidation). The effects of different reaction temperatures ($30^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$) and equivalent ratios ($0.1{\sim}10.0$) on the formation of iron oxides were investigated. An equilibrium phase diagram was established by quantitative phase analysis of the iron oxides using the Rietveld method. The equilibrium phase diagram showed a large difference from the equilibrium phase diagram of Kiyama when the equivalent ratio was above 1, and single $Fe_3O_4$ phase only formed above an equivalent ratio 2 at all reaction temperatures. Kiyama synthesized iron oxide using iron sulfate and a strong alkali NaOH solution.

키워드

참고문헌

  1. T. B. Byun, J. Y. Lee, T. H. Kim, J. G. Son and S. W. Kweon, J. Kor. Inst. Met. & Mater., 30(8), 911 (1992)
  2. K. Matsumoto, T. Akiraka, K. Hukai and S. Nakatani, Japan Patent Koukai, 56-17290 (1981)
  3. R. J. Atkinson, A. M. Posner and J. P. Quirk, J. Inorg. Nucl. Chem., 30, 3271 (1968)
  4. B. Gillot, J. Soid State Chem., 113(1), 163 (1994) https://doi.org/10.1006/jssc.1994.1355
  5. W. O. Milligan, H. B. Weiser, J. Amer. Chem. Soc., 57, 238 (1935) https://doi.org/10.1021/ja01305a003
  6. A. L. Mackay, Mineral. Mag., 32, 545 (1960) https://doi.org/10.1180/minmag.1960.032.250.04
  7. S. J. Kim, K. S. Song, T. H. Eom, D. S. Suhr and J. S. Roh, Kor. J. Mater. Res., 14, 5 (2004)
  8. S. J. Kim, K. S. Song, T. H. Eom and D. S. Suhr, Kor. J. Mater. Res., 15, 12 (2005)
  9. T. Takada, Chemistry and Industry (Japan), 37, 817 (1984)
  10. T. Misawa, K. Hashimoto and S. Shimodaira, Corrosion Sciences, 14, 131 (1974) https://doi.org/10.1016/S0010-938X(74)80051-X
  11. M. Kiyama, Bull. Chem. Soc. Jpn., 47, 1646 (1974) https://doi.org/10.1246/bcsj.47.1646