DOI QR코드

DOI QR Code

Densification Behavior of Dissimilar Material Powder during Die Compaction

금형압축 하에서 구리/철 이종재료 분말의 치밀화 거동

  • 김택의 (포항공과대학교 대학원 기계공학과) ;
  • 이성철 (포항공과대학교 대학원 기계공학과) ;
  • 김기태 (포항공과대학교 기계공학과)
  • Published : 2008.05.01

Abstract

Densification behavior of dissimilar material powder (copper and pure iron powder) under die compaction was investigated. Experimental data were obtained for copper and pure iron powder compacts with various volume ratios under die compaction. Dissimilar material powder was simultaneously compacted into a jointed cylindrical compact with different powder materials in inner and outer part, respectively. To simulate densification behavior of dissimilar material powder, elastoplastic constitutive equation proposed by Shima and Oyane was implemented into a finite element program (ABAQUS) under die compaction. Finite element results were compared with experimental data for densification, deformed geometry and density distribution of powder compacts under die compaction.

Keywords

References

  1. Krishna, B. V., Venugopal, P. and Rao, K. P., 2005, “Co-extrusion of Dissimiliar Sintered P/M Performs-an Explored Route to Produce Bimetallic Tubes,” Materials Science and Engineering A, Vol. A407, pp. 77-83 https://doi.org/10.1016/j.msea.2005.06.025
  2. Krishna, B. V., Venugopal, P. and Rao, K. P., 2005, “Analysis of Deformation during Simultaneous Plastic Deformation of Dissimilar Powder Metallurgical Performs,” Powder technology, Vol. 146, pp. 137-146 https://doi.org/10.1016/j.powtec.2004.08.004
  3. Durgalakshmi, D., Krishna, B. V., Venugopal, P. and Achar, D. R. G., 2003, “Studies on Cold State Joining of Dissimilar Powder Metallurgical Performs,” Journal of Materials Processing Technology, Vol. 132, pp.293-304 https://doi.org/10.1016/S0924-0136(02)00945-7
  4. Kazanowski, P., Epler, M. E. and Misiolek, W. Z., 2004, “Bi-metal Rod Extrusion-process and Product Optimization,” Materials Science and Engineering A, Vol. 369, pp. 170-180 https://doi.org/10.1016/j.msea.2003.11.002
  5. Shima, S. and Oyane, M., 1976, “Plasticity Theory for Porous Metals,” International Journal of Mechanical Sciences, Vol. 18, pp. 285-291 https://doi.org/10.1016/0020-7403(76)90030-8
  6. ABAQUS User’s I and II Manual, Hibbitt, Karlsson, and Sorensen, 1998
  7. Aravas, N., 1987, “On The Numerical Integration of A Class of Pressure-Dependent Plasticity Models,” International Journal for Numerical Methods in Engineering, Vol. 24, pp. 1395-1416 https://doi.org/10.1002/nme.1620240713
  8. Lush, A. M., Weber, G. and Anand, L., 1989, “An Implicit Time-integration Procedure for A Set of Internal Variable Constitutive Equations for Isotropic Elasto-Viscoplasticity,” International Journal of Plasticity, Vol. 5, pp. 521-549 https://doi.org/10.1016/0749-6419(89)90012-0
  9. Govindarajan, R. M., 1992, Deformation Processing of Porous Metals, Doctoral thesis, University of Pennsylvania, U. S. A.
  10. Kim, K. T. and Lee, H. T., 1998, “Effect of Friction Between Powder and a Mandrel on Densification of Iron Powder during Cold Isostatic Pressing,” International Journal of Mechanical Sciences, Vol. 40, pp. 507-519 https://doi.org/10.1016/S0020-7403(97)00063-5
  11. Kim, K. T., Cho, J. H. and Kim, J. S., 2000, “Cold Compaction of Composite Powders,” Journal of Engineering Materials and Technology, Vol. 122, pp. 119-128 https://doi.org/10.1115/1.482775
  12. Boyer, H. E., 1987, Hardness Testing, ASM International, pp. 31-55
  13. Song, M. C., Kim, H. G. and Kim, K. T., 1996, “Creep Densification of Copper Powder Compact,” International Journal of Mechanical Sciences, Vol. 38, No. 11, pp. 1197-1208 https://doi.org/10.1016/0020-7403(96)00011-2
  14. Kwon, Y. S., Lee, H. T. and Kim, K. T., 1997, “Analysis for Cold Die Compaction of Stainless Steel Powder,” Journal of Engineering Materials and Technology, Vol. 119, pp. 366-373 https://doi.org/10.1115/1.2812271