References
- J.-H. Ko, “Recent Research Trends in the Development of New Light Sources for the Backlight Unit of Liquid Crystal Display,” Asian J. Phys., vol. 14, pp. 231-237, 2005
- M. Anandan, “LCD Backlighting,” SID '02 Seminar Lecture Notes, p. 169 (2002). J. H. Kim et al., “Twodimensionally integrated fluorescent lamp for 40 inch LCD-TV application,” IMID '04 Tech. Digest, pp. 795-798, 2004
- J. Ha, J. Paek, T. Jang, and J. Choi, “A new costeffective optical plate for high performance LCD-TVs,” SDI '07 Digest, pp. 46-49, 2007
- M. Tjahjadi, G. Hay, D. J. Coyle, and E. G. Olczak, “Advances in LCD backlight film and plate technology”, Information Display, vol. 10, no. 6, pp. 22-27, 2006
- M. H. Lee, W. T. Moon, M. J. Kim, S. K. Lee, J. S. Yoon, Y. H. Jung, B. K. Jung, H. S. Soh, and B. C. Ahn, “New light collimation film (LCF) for direct-lit BLU system,” SDI '06 Digest, pp. 503-506, 2006
- J.-Y. Lee, K.-B. Nahm, J.-H. Ko, and J. H. Kim, “Effects of Reshaping Micro-pyramids and Prisms on the Optical Performances of Light Collimating Films in the Field of LCD Backlight,” IDW '06 Digest, pp. 941-944, 2006
- J.-H. Park, J.-Y. Lee, and J.-H. Ko, “Enhancement of on-axis luminance of flat fluorescent lamps (FFLs) by using micro-lens arrays,” IMID2007 Digest, pp. 965-968, 2007
- Ji-Hee Park, Jung Ho Lee, Jin Ha Jeong, Kie-Bong Nahm, Jae-Hyeon Ko, and Joong Hyun Kim, “Optical Simulation Study on the Performances of Collimating Films for LCD Backlight Applications,” Hankook Kwanghak Hoeji, vol. 18, no. 6, pp. 4432-444, 2007 https://doi.org/10.3807/HKH.2007.18.6.432
- Breault Research Organization,“The ASAP Primer,” pp. 13-234~13-256, 2006
- Jin Ha Jeong, Young Jin Kim, Ji-Young Lee, Ji-Hee Park, Jung Ho Lee, Kie-Bong Nahm, Jae-Hyeon Ko, and Joong Hyun Kim, (to be submitted)
Cited by
- P-86: Collimation Sheet Design for the One-Side Edge-Lit Backlight vol.42, pp.1, 2011, https://doi.org/10.1889/1.3621116
- A High Performance Single-Domain LCD With Wide Luminance Distribution vol.11, pp.4, 2015, https://doi.org/10.1109/JDT.2015.2408993
- Reflectance and Flexural Modulus of ABS/TiO2Composite Sheets vol.38, pp.1, 2014, https://doi.org/10.7317/pk.2014.38.1.103
- Enhancement of the Optical Performance by Optimization of Optical Sheets in Direct-illumination LCD Backlight vol.13, pp.1, 2009, https://doi.org/10.3807/JOSK.2009.13.1.152
- Novel multifunctional microspheres of polysiloxane@CeO2-PMMA: Optical properties and their application in optical diffusers vol.36, pp.2, 2013, https://doi.org/10.1016/j.optmat.2013.09.007
- Design of Light Guide Plate to Improve Optical Characteristics for Large-Area Edge-lit LED Display vol.9, pp.1, 2013, https://doi.org/10.9797/TSISS.2013.9.1.10
- High-harmonic Generation from Solid Surface Using an Oscillating Mirror Model and Plasma Mirror System for High Contrast Laser Pulse vol.13, pp.1, 2009, https://doi.org/10.3807/JOSK.2009.13.1.015
- Self-aligning Characteristics of Optical Sheets with Apertures vol.20, pp.5, 2009, https://doi.org/10.3807/KJOP.2009.20.5.301
- Study on the Optimization of the Optical Structure of Lenticular-Lens Films for LCD Backlight Applications vol.22, pp.6, 2011, https://doi.org/10.3807/KJOP.2011.22.6.247
- Design of Panel Pattern Array in LED Flat Light for Improvement of Illuminance vol.11, pp.5, 2016, https://doi.org/10.5370/JEET.2016.11.5.1357
- Study on the Luminance Properties of Optical Films for Flat-lamp Backlight Applications vol.12, pp.3, 2008, https://doi.org/10.3807/JOSK.2008.12.3.174
- Optical film with microstructures array for slim-type backlight applications vol.122, pp.13, 2011, https://doi.org/10.1016/j.ijleo.2010.07.023
- Transflective Dual Operating Mode Liquid Crystal Display with Wideband Configuration vol.14, pp.3, 2010, https://doi.org/10.3807/JOSK.2010.14.3.260
- Indirect estimation of the reflection distribution function of the scattering dot patterns on a light guide plate for edge-lit LED backlight applications vol.12, pp.4, 2011, https://doi.org/10.1080/15980316.2011.621307
- Simulation and Fabrication of the Cone Sheet for LCD Backlight Application vol.13, pp.4, 2009, https://doi.org/10.3807/JOSK.2009.13.4.478
- Analysis and design of wedge projection display system based on ray retracing method vol.52, pp.17, 2013, https://doi.org/10.1364/AO.52.003964
- Characteristics of Optical Diffusers for Light-Emitting Diodes Backlight Unit Prepared by Melt-Extrusion Process vol.52, pp.10S, 2013, https://doi.org/10.7567/JJAP.52.10MB24
- Design correlations for the optical performance of the particle-diffusing bottom diffusers in the LCD backlight unit vol.192, pp.1, 2009, https://doi.org/10.1016/j.powtec.2008.12.003
- A novel diffuser sheet comprising nanosized birefringent fibers embedded within an isotropic polymer matrix vol.295, 2013, https://doi.org/10.1016/j.optcom.2012.12.083
- Homogeneous free-form directional backlight for 3D display vol.397, 2017, https://doi.org/10.1016/j.optcom.2017.04.002
- Reshaping the luminance distribution of OLED lighting using optical films vol.18, pp.4, 2017, https://doi.org/10.1080/15980316.2017.1377124
- Improvement of Optical and Thermo-mechanical Properties of Polycarbonate-based Diffusers for LED Backlight Unit by Incorporation of Porous Silica Particles vol.36, pp.6, 2012, https://doi.org/10.7317/pk.2012.36.6.761
- Optimization of Optical Structure of Lightguide Panel for Uniformity Improvement of Edge-lit Backlight vol.21, pp.2, 2010, https://doi.org/10.3807/KJOP.2010.21.2.061
- A Comparison of Wavelength Dependence for Laser-assisted Lipolysis Effect Using Monte Carlo Simulation vol.13, pp.2, 2009, https://doi.org/10.3807/JOSK.2009.13.2.267
- A Highly Directional Light Guide Plate Based on V-Groove Microstructure Cell vol.10, pp.12, 2014, https://doi.org/10.1109/JDT.2014.2335813
- Design of a collimated UV-LED exposure unit based on light spread function method vol.56, pp.19, 2017, https://doi.org/10.1364/AO.56.005542
- Optimized Micro-Prism Diffusion Film for Slim-Type Bottom-Lit Backlight Units vol.7, pp.1, 2011, https://doi.org/10.1109/JDT.2010.2081967
- A direct-lit backlight unit for a 32-inch liquid crystal display incorporating a newly designed pyramid sheet vol.60, pp.7, 2012, https://doi.org/10.3938/jkps.60.1196
- Partial Polarization of Direct LED Backlight Module vol.11, pp.4, 2015, https://doi.org/10.1109/JDT.2015.2399332
- Design of Wedge Projection System with Thin Slab Structure vol.18, pp.6, 2014, https://doi.org/10.3807/JOSK.2014.18.6.679
- Designing Micro-Structure Parameters for Backlight Modules by Using Improved Adaptive Neuro-Fuzzy Inference System vol.3, 2015, https://doi.org/10.1109/ACCESS.2015.2508144
- A Study on an Integrated Light Guide Plate vol.21, pp.2, 2010, https://doi.org/10.3807/KJOP.2010.21.2.053
- Realization of specific illuminance distributions of OLED lightings using inverted microlens films vol.19, pp.3, 2018, https://doi.org/10.1080/15980316.2018.1477074