Study on the shear surface factors in fine blanking process

파인 블랭킹 공정에서 전단면에 영향을 미치는 요소에 관한 연구

  • 이춘규 (서울산업대학교 대학원 정밀기계공학과) ;
  • 이종구 (서울산업대학교 대학원 정밀기계공학과) ;
  • 류제구 (서울산업대학교 대학원 정밀기계공학과)
  • Received : 2007.12.27
  • Accepted : 2008.03.28
  • Published : 2008.04.01

Abstract

This study is performed for investigating the effects of shearing characteristics in fine blanking, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press equipped with specially designed hydraulic unit is used for experiments. Cold rolled steel sheet(3.0mm) materials which got properties, 2212.39kgf of maximum, $29.490kgf/mm^2$ of stress and 41.33% of strain were used. it can be concluded that the center distance of vee indenter ring can be obtained 2.0mm in SPCC 3.0t.

Keywords