Design & Manufacturing
- Volume 2 Issue 2
- /
- Pages.25-28
- /
- 2008
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
Design and fabrication of molds moved wall thickness for biochip considering molding stability
성형안정성을 고려한 바이오칩용 측벽 이동형 금형설계 및 제작
- Go, Young-Bae (Technical R&D center, JMP, Inc.) ;
- Kim, Jong-Sun (Technical R&D center, JMP, Inc.) ;
- Min, In-Gi (Technical R&D center, JMP, Inc.) ;
- Yu, Jae-Won (Technical R&D center, JMP, Inc.) ;
- Kim, Jong-Duck (Technical R&D center, JMP, Inc.) ;
- Yoon, Kyung-Hwan (Technical R&D center, JMP, Inc.) ;
- Lee, Sung-Ho (Technical R&D center, JMP, Inc.) ;
- Kim, Kyung-Min (Technical R&D center, JMP, Inc.) ;
- Kim, Byung-Il (Technical R&D center, JMP, Inc.) ;
- Hwang, Chul-Jin (Technical R&D center, JMP, Inc.)
- 고영배 (한국생산기술연구원) ;
- 김종선 (한국생산기술연구원) ;
- 민인기 (한국생산기술연구원) ;
- 유재원 (한국생산기술연구원) ;
- 김종덕 (한국생산기술연구원) ;
- 윤경환 (단국대학교) ;
- 이성호 (나노종합팹센터) ;
- 김경민 (나노종합팹센터) ;
- 김병일 (나노종합팹센터) ;
- 황철진 (한국생산기술연구원)
- Received : 2007.11.30
- Accepted : 2008.02.28
- Published : 2008.04.01
Abstract
Micro fabrication of biochip such like lab-on-a-chip becomes increasingly important. In this study, we designed and manufactured of new molds which were main factors for forming process in order to mass produce of biochip using forming process. Forming analysis of biochip was performed by Moldflow software. Results of this study are able to design and manufacture the mold which can be easy to eject the workpiece by using the slide mechanism for biochip.