Design & Manufacturing
- Volume 2 Issue 2
- /
- Pages.15-19
- /
- 2008
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
Development of the automatic packaging system for blow molding products
블로우 성형품 자동 패키징 시스템 개발
- Kim, Gun-Hee (Graduated school of mechanical engineering, Inha University) ;
- Jung, Woo-Chul (Graduated school of mechanical engineering, Inha University) ;
- Heo, Young-Moo (Graduated school of mechanical engineering, Inha University) ;
- Yoon, Gil-Sang (Graduated school of mechanical engineering, Inha University) ;
- Chang, Sung-Ho (Graduated school of mechanical engineering, Inha University) ;
- Shin, Gwang-Ho (Graduated school of mechanical engineering, Inha University)
- 김건희 (인하대학교 기계공학과 대학원) ;
- 정우철 (인하대학교 기계공학과 대학원) ;
- 허영무 (인하대학교 기계공학과 대학원) ;
- 윤길상 (인하대학교 기계공학과 대학원) ;
- 장성호 (인하대학교 기계공학과 대학원) ;
- 신광호 (인하대학교 기계공학과 대학원)
- Received : 2007.12.19
- Accepted : 2008.02.28
- Published : 2008.04.01
Abstract
In this paper, the automatic assembly and packaging system was developed for PET blow molding products. The PET blow molding products mainly are used in groceries case and are in great demand. Generally, the molding process is compose of 4 processes such as plastic resin injection, molding, ejecting and packaging. In case of packaging process, although amount of work per hour is very large, all processes are still performed by the manual work. For this reason, the automatic packaging system was developed with the function of automatic hand-grip part assembly. For the development of system, the existing processes and the shape of molding product were analyzed and specifications were deducted. Finally, the automatic assembly and packaging system was developed and applied to the manufacturing field.