Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Part Assembly Sequences for Human Assembler Postures

조립작업자의 동작과 자세를 고려한 조립순서결정

  • 김좌년 (홍익대학교 공과대학 대학원 기계공학과) ;
  • 정성한 (홍익대학교 공과대학 대학원 기계공학과) ;
  • 지해성 (홍익대학교 기계시스템디자인공학과)
  • Published : 2008.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

Today's product development environment is characterized as abrupt changes in consumer needs and short lifecycle of the product, which requires manufacturing companies to be equipped with time-to-market and time-to-volume strategies as prime factors for the successful product launch on market. They especially need to bring a product to the market faster with smart methodologies that enable assembly manufacturers to efficiently simulate and manage part assembly information throughout product development process. The research in this paper provides n e-manufacturing methodology considering geometric constraints in order to decide assembly process sequences. The methodology organizies the part layout (position & orientation) in order to optimize human postures during the assembly processes. As the case studies, assembly parts for two commercial products have been generated as CAD models and analyzed for the desired solutions for part assembly sequences using the proposed methodology.

Keywords

References

  1. Redford, A. and Chal, J., Design for assembly; principles and practice, McGraw-Hill, 1994
  2. Mathieu, L. and Marguet, B., "Integrated Design Method to Improve Producibility based on Product Key Characteristics and Assembly Sequences," CIRP Annals - Manufacturing Technology, Vol. 50, Issue 1, pp. 85-88, 2001 https://doi.org/10.1016/S0007-8506(07)62077-0
  3. 임기순, 김광수, "조립을 위한 제약조건기반 제품 모델링", 한국CAD/CAM학회 학술발표회논문집, pp. 173-178, 1997
  4. 최근한, 김광수, "조립모델링에서의 3차원 기하학적 구속조건에 대한 해법", 한국CAD/CAM학회 학술발표회논문집, pp. 201-208, 1997
  5. 김재정, "기계부품들의 조립 및 해체과정 설계를 위한 스크류이론의 응용", 한국CAD/CAM학회 논문집, 제2권, 제1호, pp. 60-67, 1997
  6. Barnes, C.J., Jared, G. E., and Swift, K. G., "Decision Support for Sequence Generation in an Assembly Oriented Design Environment", Journal of Robotics and Computer-Integrated Manufacturing, Vol. 20, No. 4, pp. 289-300, 2004 https://doi.org/10.1016/j.rcim.2003.10.013
  7. Romney, B., Godard, C., Goldwasser, M., and Ramkumar, G., "An Efficient System for Geometric Assembly Sequence Generation and Evaluation", Proc. ASME Int. Computers in Engineering Conference, pp. 699-712, 1995
  8. Lee, S. and Moradi, H., "Disassembly Sequencing and Assembly Sequence Verification using Force Flow Networks" Proceedings of the 1999 IEEE International Conference on Robotics & Automation, Vol. 4, pp. 2762-2767, 1999
  9. Kanai, S. and Takahashi, H., "ASPEN: Computer-Aided Assembly Sequence Planning and Evaluation System Based on Predetermined Time Standard", Annals of the CIRP, Vol. 45, No. 1, pp. 35-39, 1996 https://doi.org/10.1016/S0007-8506(07)63012-1
  10. Wang, H. and Ceglarek, D., "Quality-driven Sequence Planning and Line Configuration Selection for Compliant Structure Assemblies", CIRP Annals, Vol. 54, No. 1, pp. 31-35, 2005 https://doi.org/10.1016/S0007-8506(07)60043-2
  11. 이동열, 소현철, 임현준, 지해성, "변형 조립체 공차 해석 기법을 이용한 판재 용접용 치구 및 용접 점의 위치결정", 한국CAD/CAM학회 학술발표회논문집, 제12권, 제4호, pp. 263-273, 2007
  12. Chan, D.S.K., "Simulation Modelling in Virtual Manufacturing Analysis for Integrated Product and Process Design", Journal of Assembly Automation, Vol. 23, No. 1, pp. 69-74, 2003 https://doi.org/10.1108/01445150310460114
  13. 박상호, 이건우, "기하 공차의 표현 및 조립성 확인에의 응용", 한국CAD/CAM학회 논문집, 제1권, 제3호, pp. 215-223, 1996
  14. 김남두, 임현준, 지해성, 박희석, 차태인, "디지털 모델링 및 시뮬레이션을 이용한 작업동작의 인간공학 분석", 한국CAD/CAM학회 학술발표회논문집, pp.530-539, 2007
  15. Karhu, O, Kansi, P., and Kuorinka, I., "Correcting Working Postures in Industry: A Practical Method for Analysis", Appl. Ergon., Vol. 8, No. 4, pp. 199-201, 1977 https://doi.org/10.1016/0003-6870(77)90164-8
  16. Rychtyckyj, N., "Ergonomics Analysis for Vehicle Assembly using Artificial Intelligence", AI Magazine, Sept. 2005
  17. Udosen, U.J., "Ergonomic Workplace Construction, Evaluation and Improvement by CADWORK", International Journal of Industrial Ergonomics, Vol. 36, Issue 3, pp. 219-228, 2006 https://doi.org/10.1016/j.ergon.2005.11.005
  18. Zhao, W. and Madhavan, V., "Virtual Assembly Operations with Grasp and Verbal Interaction," Proceedings of VRCIA 2006: ACM International Conference on Virtual Reality Continuum and its Applications, Hong Kong, China, pp. 245-254, 2006
  19. 송영재, 이건우, "인간공학적 설계를 지원하기 위한 통합 제품 개발 환경", 한국CAD/CAM학회 학술발표회논문집, pp. 87-96, 2005
  20. 류종현, 이성수, "손목터널증후군 예방을 위한 컴퓨터 마우스의 인간공학적 설계에 관한 연구", 한국CAD/CAM학회 학술발표회논문집, pp. 727-734, 2005
  21. 임용훈, 김건연, 노상도, 이상식, 문정환, "인간중심형 디지털팩토리 개발", 한국CAD/CAM학회 학술발표회논문집, pp. 944-949, 2007
  22. 정문기, 이건우, 조현덕, 김태우, Ma Yanzhao, 이상헌, "인간 친화적 설계 시스템을 위한 디지털 인체 모델 구성 연구", 한국CAD/CAM학회 논문집, 제12권, 제6호, pp. 429-440, 2007
  23. 정성한, 사성진, 임현준, 지해성, "디지털 휴먼 모델을 이용한 핸드 브레이크 위치 평가", 한국CAD/CAM학회 학술발표회논문집, pp. 741-747, 2008
  24. 정문기, 조현덕, 김태우, 노태환, 이건우, "인간 친화적 차량 운전자 공간 설계를 위한 디지털 인체 모델의 활용", 한국CAD/CAM학회 학술발표회논문집, pp. 204-212, 2008
  25. 신종계, 노상도, 지해성, 임현준, CAD, 디지털 가상 생산과 PLM, ISBN:8958322640, 시그마프레스, August 2006
  26. Ullman, D.G., The Mechanical Design Process, ISBN: 0072373385 McGraw-Hill, 2004
  27. Dul, J. and Bernard, W., Ergonomics for Beginners; A Quick Reference Guide, 2nd, Taylor & Francis Group, 2001
  28. Whitney, D., 2004, Mechanical Assemblies; Their Design, Manufacture, and Role in Product Development ISBN10: 0195157826 Oxford Univ. Press, Feb. 2004
  29. Louhevaara, V. and Suurnakki, T., OWAS: A Method for the Evaluation of Postural Load during Work, Training Publication II. Finish Institute for Occupational Health, Helsinki, 1992