한국농공학회논문집 (Journal of The Korean Society of Agricultural Engineers)

  • 제50권5호
  • /
  • Pages.51-60
  • /
  • 2008
  • /
  • 1738-3692(pISSN)
  • /
  • 2093-7709(eISSN)
한국농공학회 (The Korean Society of Agricultural Engineers)
권호 표지
DOI QR코드

DOI QR Code

실리카퓸 및 메타카올린 치환률에 따른 고강도 콘크리트와 탄소섬유보강 폴리머 보강근의 부착거동

Bond Behavior of Carbon Fiber Polymer Reinforced Polymer Rebar in High Strength Concrete with Replacement Ratio of Silica Fume and Metakaolin

  • 박찬기 (공주대학교 산업과학대학 지역건설공학) ;
  • 원종필 (건국대학교 생명환경과학대학 사회환경시스템공학과) ;
  • 김종옥 (공주대학교 산업과학대학 지역건설공학)
  • 발행 : 2008.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study is to relate the bond characteristics of CFRP rebar in high strength concrete incorporated with silica fume(SF) and metakaolin(MK). An direct bond test were performed to evaluate the effect of SF and MK on bond properties of high-strength concrete and CFRP rebar. The high strength concrete mix included four SF and MK mixes with 0%, 5%, 10% and 15%. Results of bond performance experiment in relation to pullout vs slip behavior of FRP rebar and high strength showed better performance of SF than MK. Also, the results showed the improved bond strength as replacement ratio of SF and MK increased. The relative bond strength in which $1.3{\sim}3.2$ of estimated values were obtained.

키워드

참고문헌

  1. ACI440K, 2002, Guide test methods for fiberreinforced polymer(FRP) rods and sheets, Reported by ACI Committee 440K
  2. ACI Report 440H, 2000, Guide for the design and construction of concrete reinforced with FRP bars. American Concrete Institute Committee 440
  3. Abdul R.H. and H.S. Wong, 2005, Strength estimation model for high-strength concrete incorporating metakaolin and silica fume, Cement and Concrete Research, 35(4), pp. 688-695 https://doi.org/10.1016/j.cemconres.2004.05.040
  4. Bonneau, O., C. Vernet, M. Moranville and P. Aitcin, 2000, Characterization of the granular packing and percolation threshold of reactive powder concrete, Cement and Concrete Research, 30(12), pp. 1861-1867 https://doi.org/10.1016/S0008-8846(00)00300-8
  5. Bhanja, S. and B. Sengupta, Influence of silica fume on the tensile strength of concrete, Cement and Concrete Research, 2005, 35(4), pp. 743-747 https://doi.org/10.1016/j.cemconres.2004.05.024
  6. Cosenza, E., G. Manfredi, and R. Realfonzo, 1987, Behavior and modeling of bond of FRP rebar to concrete, Journal of Composites Construction, 1(2), pp. 40-45
  7. Focacci, F., A. Nanni, and C.E. Bakis, 2000, Local bond-slip relationship for FRP reinforcement in concrete, Journal of Composites Construction, 4(1), pp. 23-34
  8. Galati N., A. Nanni, L.R. Dharani, F. Focacci and M.A. Aiello, 2006, Thermal effects on bond between FRP rebars and concrete, Composites: Part A, 37(8), pp. 1223-1230 https://doi.org/10.1016/j.compositesa.2005.05.043
  9. Haddad, R.H. and R.M. Abendeh, 2004, Effect of thermal cycling on bond between reinforcement and fiber reinforced concrete, Cement and Concrete Composites, 26(6), pp. 743-752 https://doi.org/10.1016/S0958-9465(03)00083-0
  10. Haraji, M. H., 1994, Development/splice strength of reinforcing bars embedded in plain and reinforced concrete, ACI Structural Journal, 95(5), pp. 511-520
  11. Jean Pera and Achene Amrouz, 1998, Development of highly reactive metakaolin from paper sludge, Advaced Cement Based Materials, 7(2), pp. 49-56 https://doi.org/10.1016/S1065-7355(97)00016-3
  12. Kim, K.H., Y.K. Cho and M.W. Kim, 2008, Development of the maintenance system for gate bridge, Proceeding of KCI, 2008, pp. 1025-1028(in Korean)
  13. Kim, H.S., S.H. Lee and H.Y. Moon, 2007, Strength properties and durability aspects of high strength concrete using korean metakaolin, Construction and Building Materials, 21(6), pp. 1229-1237 https://doi.org/10.1016/j.conbuildmat.2006.05.007
  14. Kim, Y-I. and C-Y. Sung, 2007, Strength and watertightness properties of EVA modified high strength concrete, KSAE, 49(1), pp. 45-54(in Korean) https://doi.org/10.5389/KSAE.2007.49.1.045
  15. Mazloom, M., A.A. Ramezanianpour and J.J. Brooks, 2004, Effect of silica fume on mechanical properties of high strength concrete, Cement and Concrete Composites, 26(4), pp. 347-357 https://doi.org/10.1016/S0958-9465(03)00017-9
  16. Moulin, E., P. Blane, and D. Sorrentino, 1999, Influence of key cement chemical parameters on the properties of metakaolin blended cements, Cement and Concrete Composites, 23(6), pp. 463-469 https://doi.org/10.1016/S0958-9465(00)00093-7
  17. Park, K.S., S.G. Shin and M.K. Park, 2001, Astudy on the problems encountered and comments on their solutions of agricultural hydraulic structures, Proceeding of KSAE, 2001, pp. 162-170(in Korean)
  18. Soroushian, P., S. Ravanbakhsh, and M.A. Nagi, 2002, Laboratory evaluation and field application of concrete reinforcement with aramid fiber-reinforced polymer bars, ACI Materials Journal, 99(6) pp.584-590
  19. Reda, M.M., N.G. Shrive and J.E. Gillott, 1999, Microstructural investigation of innovative UHPC, Cement and Concrete Research, 29(3), 323-329 https://doi.org/10.1016/S0008-8846(98)00225-7
  20. Shannag, M. J., 2000, High strength concrete containing natural pozzolan and silica fume, Cement and Concrete Composites, 22(6), pp. 399-406 https://doi.org/10.1016/S0958-9465(00)00037-8
  21. Tughiouart, B., B. Benmokrane, and D. Geo, 1998, Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars, Construction and building materials, 12(8), pp. 453-462 https://doi.org/10.1016/S0950-0618(98)00027-0
  22. Vijay P.V., 1999, Aging and design of concrete members reinforced with GFRP bars, PhD. thesis, Department of Civil Engineering West Virginia University, Morgantown, West Virginia, USA
  23. Wong, H.S. and RH. Abdul, 2005, Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance, Cement and Concrete Research, 35(4), pp. 696-702 https://doi.org/10.1016/j.cemconres.2004.05.051
  24. Won, J.P. Y.S. Kwon and J.J. Lee, 2002, Properties of high-Performance concrete containing high-reactivity metakaolin, 14(3), pp. 349-356 https://doi.org/10.4334/JKCI.2002.14.3.349
  25. Won, J-P., J-Y. Lee, C-G. Park, and S-G. Park, 2007a, Optimum mix proportion of latex modified repair mortar for agricultural concrete structures, KSAE, 49(2), pp. 37-46 (in Korean) https://doi.org/10.5389/KSAE.2007.49.2.037
  26. Won J. P., C. G. Park, H. H. Kim, S. W. Lee and C. I. Jang, 2007b, Effect of fibres on the bonds between FRP reinforcing bars and high-strength concrete, Composites Part B: Engineering, 39(7), pp. 747-755 https://doi.org/10.1016/j.compositesb.2007.11.005
  27. Won J. P., C. G. Park, H. H. Kim, S. W. Lee and C. Won, 2007c, Bond behavior of FRP reinforcing bars in high-strength steel fibre-reinforced concrete, Polymers & Polymer Composites, 15(7), pp. 569-578
  28. Won, J.P. and C.G. Park, 2006, Effect of environmental exposure on the mechanical and bonding properties of hybrid FRP reinforcing bars for concrete structures, Journal of Composite Materials, 40(12), pp. 1063-1076 https://doi.org/10.1177/0021998305057362
  29. Xial, J., and H. Falkner, 2007, Bond behavior between recycled aggregate concrete and steel rebars, Construction and building materials, 21(2), pp. 395-401 https://doi.org/10.1016/j.conbuildmat.2005.08.008
  30. Yin-Wen Chan, Shu-Hsien Chu, 2004, Effect of silica fume on steel fiber bond characteristics in reactive powder concrete, Cement and Concrete Research, 34(7), pp. 1167-1172 https://doi.org/10.1016/j.cemconres.2003.12.023