Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Selection of Cutting Conditions in High Speed Pipe Cutting Machine

고속 파이프 절단기의 절단 조건 선정에 관한 연구

  • 안성환 (창원대학교 기계설계공학과 대학원) ;
  • 신상훈 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Published : 2008.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents the selection of cutting conditions in high speed pipe cutting machine for the better quality. A high speed pipe cutting machine which uses a rotary knife can make good quality products in short time. But, the machine is much sensitive by cutting conditions because of the complicated mechanism. In this reason, many experiments for cutting condition selection are necessary to improve quality of production. This study carried out cutting experiments with the three factors that are cutting RPM, cutting force and pooling force. 2-dimensional profile measuring instrument is used to measure which is represented by ${\Delta}h$, a sum of burr and collapse height. The effects of factors are analyzed by using MINITAB, the commercial software.

Keywords

References

  1. Park, S. H., 1984, Modern Design of Experiments, Min-yeong-sa, Seoul, pp. 9-11
  2. Shin, S. H., and Lee, C. M., 2005, 'A Study on the Development of Multi-Way High Speed Pipe Cutting Machine,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 950-953
  3. Lee, S. B., 2002, MINITAB User Handbook, ERETEC, Korea, pp. 168-256
  4. Lee, C. M., Hwang, Y. G., and Jung, J. Y., 2004, 'The Effect of Cutting Conditions on Surface Roughness in MQL Turning,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 28-33
  5. Kim, S. Y., Kim, H. I., Cho, S. G., Bae, B. G., Suk, C. S., Lee, J. G., Mo, J. Y., and Park, D. Y., 2005, 'An Investigation of Tensile Specimen Appearance for Slender Tubular Products by Copper,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 2001-2005
  6. Kim, H. J., Lim, S. H., and Lee, C. M., 2005, 'A Study on the Process for Precision forming by 3-dimension bending machine,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 1897-1900