Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Development of Automatic Cam Profile Measurement System

자동 측정이 가능한 전용 캠 프로파일 측정 시스템 개발

  • 정황영 (충남대학교 기계공학과) ;
  • 이현석 (충남대학교 기계공학과) ;
  • 박태민 (㈜ 풍산금속) ;
  • 신우철 (한국기계연구원) ;
  • 고준빈 (한밭대학교 기계설계공학과) ;
  • 홍준희 (충남대학교 기계공학과 BK21 메카트로닉스 사업단)
  • Published : 2008.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, It does the profile measurement of the cam of diesel engine SOHC of the actual object. It uses the measurement of run-out method. This method is that the surface of the object is measured by the sensor when the object rotate, and calculated and displayed by the computer the signal which acquired by sensor. When we acquire the signals, we have two error because of motion and contacting between cam and probe. In this paper, we compensate the motion error while simply liner equation. And we have a solution that we change the figure of probe when we have a contacting error. We compared the data measuring on developed automatic cam profile measuring system with the data measured on CMM.

Keywords

References

  1. Tesar, D., and Mathew, G. K., 2003, Modelled Cam System: Analysis, Design and Synthesis, Lexington Book
  2. Papaioannou, S. G., 1988, 'Computer-Aided Manufacture of High Precision Cams,' Trans. ASME, Journal of Engineers for Industry, Vol. 110, pp. 352-359 https://doi.org/10.1115/1.3187894
  3. Ranghavacharyulu, E., and Rao, J.S., 1975, On the Jump Characteristics of Cam-Follower System, Procd. ISTAM Congress, pp. 156-210
  4. Kim, H. R. and Newcombe, E. R., 1978, 'Stochastic Error Analysis in Cam Mechanisms,' Mechanisms and Machine, Vol. 13, No. 6, pp. 631-641 https://doi.org/10.1016/0094-114X(78)90030-7
  5. Dhande, S. G., and Chakroborty, J., 1975, Mechanical Error Analysis of Cam Follower System-A Stochastic Approach, Fourth World Cong. Theory Mach. Mechanisms, Mech. Engr. Publ. Ltd., London, pp. 957-962
  6. Oshima, T., 1970, 'Cam Profile Machining by Numerically Controlled Milling Machine', Review of the Electrical Communication laboratory, Vol. 18, No. 3, pp. 226-295
  7. Papaioannou, S. G., and Kiritsis, D., 1988, 'Computer -Aided Manufacture of High Precision Cams,' Trans. ASME, Journal of Engineers for Industry, Vol. 110, No.18, pp. 352-366 https://doi.org/10.1115/1.3187894
  8. Gal-Tzur, Z., 1989, 'Design and Manufacturing for Integrated CAD/CAM of Cam,' Trans. ASME, Journal of Engineers for Industry, Vol. 111, No. 8, pp. 307-320 https://doi.org/10.1115/1.3188765
  9. Lin, A. C., 1988, 'Computerized Design and Manufacturing of Plate Cams,' Int. J. Prod. Res., Vol. 26, No. 8, pp. 1395-1400 https://doi.org/10.1080/00207548808947954
  10. Edward, E. H., 1972, Handbook of Measurement and Control, Schaevitz Engineering, pp. B1-4
  11. Ernest, O. D., 1983, Measurement Systems Application and Design, McGraw-Hill, pp. 211-246
  12. Cho, N. H., Lee, J. H., and Choi, M. Y., 1999, 'Surface Roughness Stylus Profilometer Measurement Error Compensation,' J. of KSMTE, Vol. 8, No. 1, pp. 126-134
  13. Kim, S. C., Hong, D. S., and Chung, W. J., 2004, 'PID Control Fuzzy Control Oil Cooler,' J. of KSMTE, Vol. 13, No. 4, pp 87-94