한국농공학회논문집 (Journal of The Korean Society of Agricultural Engineers)

  • 제50권1호
  • /
  • Pages.49-57
  • /
  • 2008
  • /
  • 1738-3692(pISSN)
  • /
  • 2093-7709(eISSN)
한국농공학회 (The Korean Society of Agricultural Engineers)
권호 표지
DOI QR코드

DOI QR Code

폴리올레핀계 구조용 합성섬유보강 콘크리트의 휨성능 및 화재 저항성

Flexural Performance and Fire Resistance of Polyolefin Based Structural Synthetic Fiber Reinforced Concrete

  • 박찬기 (공주대학교 지역건설공학) ;
  • 원종필 (건국대학교 사회환경시스템공학과)
  • 발행 : 2008.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study evaluated the flexural properties and fire resistance of polyolefm based structural synthetic fiber reinforced concrete. The effects of differing fiber length, dimension and fiber volume fraction were studied. Flexural and fire resistance test were conducted in accordance with the JCI SF-4 and RABT time heating temperature curve, respectively. The Flexural test results indicated that the polyolefln based structural fiber reinforcement showed an ability to increase the flexural toughness and good fire resistance significantly(as compared to steel fiber reinforcement).

키워드

참고문헌

  1. A.K. Gabriel, 2003, Passive fire protection in tunnel, Concrete for the Construction Industry, Vol. 37, No. 2, pp. 31-36
  2. A. Samer Ezeldin and Steven R. Lowe, 1991, Mechanical Properties of Steel Fiber Reinforced Rapid-Set Materials, ACI Materials Journal, Vol. 88, No. 4, pp. 384-389
  3. BarChip Synthetic Reinforcing Fiber, 2006, Product Data sheet, http://www.elastoplastic.com
  4. B. Chen and J. Liu, 2004, Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures, Cement and Concrete Research, Vol. 34, No. 6, pp. 1065-1069 https://doi.org/10.1016/j.cemconres.2003.11.010
  5. E. Nordstrom, 2000, Steel Fiber Corrosion in Cracks: Durability of Sprayed Concrete, Licentiate thesis, Division of Structural Engineering, Department of Civil and Mining Engineering, Lulea University of Technology, Sweden
  6. E.K. Stefopoulos, and D.G. Damigos, 2007, Design of emergency ventilation system for an underground storage facility, Tunnelling and Underground Space Technology, Vol. 22, No. 3, pp. 293-302 https://doi.org/10.1016/j.tust.2006.07.002
  7. H.S. Armelin and N. Banthia, 1997, Predicting the Flexural Postcracking Performance of Steel Fiber Reinforced Concrete from the Pullout of Single Fibers, ACI Materials Journal, Vol. 94, No. 1, pp. 18-31
  8. I. Haukur, and L. Anders, 2004, Recent Achievents Regarding Measuring of Time-Heat and Time-Temperature Development in Tunnel, Safe & Tunnels, First International Symposium, Prague, pp. 87-96
  9. J. Mirza, 1991, Durability Properties of Overlays for Erosion-Damaged Concrete, ACI special publication, SP 126-15, Vol. 126, pp. 279-294
  10. J. E. McDonald, 2000, Evaluation of Materials for Repair of Erosion Damage in Hydraulic Structures, ACI special publication, SP 192-54, Vol. 192, pp. 887-898
  11. J.C. Chern and C.H. Young, 1990, Factors Influencing the Drying Shrinkage of Steel Fiber Reinforced Concrete, ACI Materials Journal, Vol. 87, No. 2, pp. 123-139
  12. K. Pierre, C. Gregoire, and G. Christophe, 2001, High-temperature behaviour of HPC with polypropylene fibre from spalling to micro-structure, Cement and Concrete Research, Vol. 31, No. 10, pp. 1487-1499 https://doi.org/10.1016/S0008-8846(01)00596-8
  13. K. Kosa and A. E. Naaman, 1990, Corrosion of Steel Fiber Reinforced Concrete, ACI Materials Journal, Vol. 87, No. 1, pp. 27-37
  14. N. Banthia, and C. Yan, 2000, Shrinkage cracking in polyolefin fiber reinforced concrete, ACI Materials Journal, Vol. 97, No. 4, pp. 432-437
  15. O. Cengiz, L. Turanli, 2004, Comparative evaluation of steel mesh, steel fibre and highperformance polypropylene fibre reinforced shotcrete in panel test, Cement and Concrete Research, Voll. 34, No. 8, pp. 1357-1364 https://doi.org/10.1016/j.cemconres.2003.12.024
  16. Park, S-H, Oh, H-H. Shin, Y-S. Shin and Oh, S-J. Oh, 2006, A case study on the fire damage of the underground box structures and its repair works, Tunnelling and Underground Space Technology, Vol. 21, No. 3-4, pp. 328 https://doi.org/10.1016/j.tust.2005.12.042
  17. P.C. Tatnall, 2002, Shotcrete in fires: Effect of fibers on explosive spalling, Magazine of shtocrete, Fall, pp. 10-12
  18. P.N. Balagure, and S.P. Shah, 1992, Fiber-Reinforced Cement Composites, McGraw-Hill, New York, pp. 2-8
  19. P.W. Chen and D.D.L. Chung, 1996, Comparative Study of Concretes Reinforced with Carbon, Polyethylene, and Steel Fibers and Their Improvement by Latex Addition, ACI Materials Journal, Vol. 93, No. 2, pp. 129-146
  20. R. Heere, D.R. Morgan, N. Banthia, and Y. Yogendran, 1996, Evaluation of Shotcrete Repaired Concrete Dams in British Columbia, ACI Concrete International, 18(3), 1996, pp. 24-33
  21. S.L. Suhaendi, T. Horiguchi, 2006, Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition, Cement and Concrete Research, Vol. 36, No. 9, 2006, pp.1672-1678 https://doi.org/10.1016/j.cemconres.2006.05.006
  22. S. P. Singh and S. K. Kaushik, 2001, Flexural Fatigue Analysis of Steel Fiber-Reinforced Concrete, ACI Materials Journal, Vol. 98, No. 4, pp. 306-312
  23. V.K.R. Kodur, A. Bilodeau, and G.C. Hoff, 2004, Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire, Cement and Concrete Composite, Vol. 26, No. 2, pp. 163-174 https://doi.org/10.1016/S0958-9465(03)00085-4
  24. Won, J-P, Baek, C-W, Park, C-G, and Jun, O-J, 2004, Performance of Steel Fiber Reinforced Shotcrete Using Alkali Free Based Accelerator, Journal of KSAE, Vol. 46, No. 3, pp. 65-72
  25. Won. J-P, Lim. D-H, and Park, C-G, 2006, Bond behavior and flexural performance of structural synthetic fibre reinforced concrete, Magazine of concrete research, Vol. 28, No. 6, pp. 401-410
  26. Won, J-P, Park, C-G, Jeong, I-S, and Jeon, W-J, 2002, Effect of Polypropylene Fiber on Reduction of Shrinkage Crack and Improvement of Durability of Rural Road Concrete Pavement, Journal of KSAE, Vol. 44, No. 1, pp. 134-141
  27. Xu, H, Properties of Fiber Reinforced Concrete with Latex Modification, MSC thesis, University of British Columbia, 2003, Canada

피인용 문헌

  1. Pullout Performance of Reinforcing Fiber Embedded in Nano Materials Cement Mortar with Nano Clay Contents vol.55, pp.3, 2013, https://doi.org/10.5389/KSAE.2013.55.3.113
  2. Mechanical Properties and Impact Resistance of Hybrid Fiber Reinforced Concrete with Type of Reinforcing Fibers for Precast Concrete vol.55, pp.4, 2013, https://doi.org/10.5389/KSAE.2013.55.4.029